The tan B2D Directional Lavalier Mic, Medium Gain, with Detachable LEMO 3-Pin Connector Cable for WisyCom Wireless Transmitters from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the B2D lavalier is equipped with a detachable cable that terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

Hypercardioid Pattern    Fits WisyCom Transmitters    Headroom for Loud Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Medium (red band, -10 dB re W4) for Loud vocals

Related Questions and Answers

Q: 1. Will this fit a sony 200-600mm lens with sony a7riii attached?

A: The inner length of the case is 14 inches. The Sony 200-600mm and Sony A7RIII is 15.42 inches. You will be able to fit the lens (12.52 inches) and camera body (2.9 inches) if you detach the two items.

Q: 2. Does the leather stain clothing when it gets sweaty? I routinely work in hot climates with while wearing a white button down and I've had other straps stain my shirts before.

A: The RL Handcrafts Clydesdale Pro Dual Leather Camera Harness (Medium, Coffee) should not stain when exposed to damp conditions.

Q: 3. I am 5'5" with 42" chest, which size does this fall into?

A: That would fall into large for the RL Handcrafts Clydesdale Pro Dual Leather Camera Harness.

Q: 4. Will a D610, 24-70 and 70-200 fit in this case if I detach the camera body and lay it flat?

A: Yes the V200 can hold your Nikon body and lenses.

Q: 5. I need extra security for camera and my 100-600 Not trusting it with my 100-6oo mm lens can u help suggest what I should do

A: RL Handcrafts Clydesdale Pro Dual Leather Camera Harness comes with two extra security attachments to protect your expensive lens in case of a failure.

Q: 6. Are the interior dimensions listed for this case with or without the foam dividers?

A: The listed interior dimensions are for the Pelican Vault V200 Medium Case with out anything in it.

Q: 7. Will this case fit a Fuji XT3 with battery grip attached- standing upright inside the case?

A: If one would put the Fuji XT-3 body with a grip attached upright in the Pelican Vault V200 Medium Case with Lid Foam and Dividers, it would only fit if it was able to dig into the foam cover.

Q: 8. Is there a lens attachment for this

A: Yes. Please review the following item Ruggard Quickdraw Camera Strap Swivel Clip (Chrome) BH #RUCSQ • MFR #CS-Q https://bhpho.to/344mR8i

Q: 9. Will this hold a Nikon d850 and a Nikon z9

A: Yes RL Handcrafts Clydesdale Pro Dual Leather Camera Harness (Medium, Tan) will hold a Nikon D850 and a Nikon Z9.

Q: 10. Will a Canon EF 100-400mm f/4.5-5.6L IS II USM Lens with the lens hood attached in the storage position fit in the V200 case w/Dividers given the 5.5" interior dimension?

A: Yes a Canon EF 100-400mm II lens along with its hood in reverse can fit across the width of this case.