This 8.2' Straight Tube Segment with Conical Connector from Global Truss adds extra length to 2" truss sections. One end is 2" diameter female and the other has a conical connector.

Fabricated by Certified TUV Welders

Related Questions and Answers

Q: 1. Horizontally, how much weight can these support when connected together and hung from above. I'm looking at about 33 ft span.

A: When the payload is evenly distributed at 25 lb pre foot, the Global Truss Straight Square Segment for F34 Square Truss (11.5', Matte Black) can support a static load of 757 lb.

Q: 2. Does this come with the conical couplers or any other hardware?

A: The Global Truss 6.56' Truss Segment with Six Main Cords includes conical couplers.

Q: 3. What is the weight capacity if hanging off?

A: Please give global truss a call to discuss further. 323-415-6225

Q: 4. Can I connect two of these together to make a single 12' tube using the included hardware?

A: Yes, 2 tubes can be connected together with the included hardware.

Q: 5. Do Matthews Baby Pin Grid Clamps fit onto the outer diameter of this truss, or should I try using Yoke Adapter Clamps fitted specifically for truss instead? Grid clamps usually max out at 1.9 inch OD pipes (I haven't been able to fit any OD measurements for Global Truss as far as I can tell), but they're a single piece of metal with a cheeseborough-type design which seems more secure to me than a yoke adapter clamp, but if a grid clamp doesn't fit on truss then I guess I'll have to make do.

A: A Matthews Baby Grid Clamp can work on a truss with a maximum diameter of 1 1/2". However, the Global Truss SQ-4112 has a diameter of 2", therefore they're not compatible with one another. A more suitable clamp would be the Avenger C4462 MP Coupler with 5/8" (16 mm) Spigot, BH # AVC44621. https://bhpho.to/3N7bv60

Q: 6. How many segments can be connected together? I have a 20' span that I need to cross to hold light weight LED lights. Will I need a support in the center or will I be able to connect 4 of these together?

A: Regarding the Global Truss Straight Segment for F32 I-Beam Truss System (6.56'), Global Truss recommends to use three of these 6.56' segments supported by a minimum of 4 points for a 20' span.

Q: 7. Do you need to purchase bases separately for these trusses to stand upright?

A: Yes, the bases are separate and there are a few to choose from. The main differences are the size of the base, and the color. https://www.bhphotovideo.com/c/search?Ntt=f34%20base&N=0&InitialSearch=yes&sts=ma

Q: 8. What is the maximum number of 11.5 ft segments that can be put together for a single span with 2 supports only at each end

A: A maximum number of three Global Truss Straight Square Segment for F34 Square Truss (11.5', Matte Black) can be placed together before you need additional support.

Q: 9. How much weight are these rated for?

A: Hello Beckie- Contact us(Global Truss) to discuss this further. 323-415-6225

Q: 10. What dimensions tube

A: The outer diameter of the Global Truss Straight Square Segment for the F34 Square Truss is 2 inches.