The 18" HD-SDI Belden 1855A RG59 Coax Cable from Laird Digital Cinema is a low-profile, lightweight BNC video cable that supports HD-SDI and SDI transmissions. This 23 AWG cable consists of a Belden 1855A sub-mini cable with a male Kings 2065-11-9 BNC connector on each end.

75-Ohm 23 AWG Belden 1855A RG59 Cable    Low Profile, Light Sub-Mini Design    Kings 2065-11-9 Male BNC Connectors    Copper Conductor, FHDPE Insulation    Duofoil/TC Outer Shield, PVC Jacket    For HD-SDI & SDI Transmissions    Sweep Tested to 3 GHz

Sub-miniature Belden 1855A cable with a low-profile, lightweight design

Kings 2065-11-9 male BNC connector on each end

For HD-SDI and SDI video transmissions

Related Questions and Answers

Q: 1. Is the included SDI cable 12G ?

A: The JackReel Deluxe BNC Reel (Belden 1505A, 200') is rated for 3G-SDI.

Q: 2. Will this work with a PTZ controller to a PTZ cam (like PTZ optics)?

A: Yes

Q: 3. Will this tool crimp Belden 1695A?

A: Yes, I used it to crimp Kings 2065-10-9 BNC connectors on Belden 1695A. If you look at the specs of both the 1694A and 1695A you will find that the outer jacket of the 1695A has a smaller diameter than the 1694A, but it still provided a solid crimp.

Q: 4. Hello! is it compatible with the sony fx6?

A: No, The Laird Digital Cinema 12 VDC Anton Bauer D-Tap to 2.5mm would not be supported by the FX6. We recommend this as an alternate. https://bhpho.to/3JOoQ01

Q: 5. Is there a split cable to support Timecode, Genlock and RED Control through a single cable? Like there is on DSMC2

A: Unfortunately not a cable but we do offer an expansion module that will have all 3. https://www.bhphotovideo.com/c/product/1570780-REG/red_digital_cinema_720_0058_komodo_expander_module.html

Q: 6. Does this cable have the male two-pin connector? I can't tell from the picture.

A: no this is a RED Lemo power cable

Q: 7. Is the XLR terminal a MINI?...can it be used in the blackagic pocket 6K camera?

A: Hi Angel. It is a mini XLR Male, I apologize that that info was missing. As far as using this with a Blackmagic Pocket 6K, we can't say for sure- these were designed for RED Cameras, however if the pinout is similar on the Blackmagic camera then this should work. Thanks!

Q: 8. does this come with the cable installed already or is it saying that it will handle 200'?

A: This item includes both the reel and 200' of Belden 1505A cable with BNC connectors.

Q: 9. Is there a split cable to support Timecode and RED Control through a single cable?

A: For Timecode and control, you need this: https://www.bhphotovideo.com/c/product/1570780-REG/red_digital_cinema_720_0058_komodo_expander_module.html?sts=pi&pim=Y

Q: 10. Does this cake work with the Dragon X?

A: You will need one of the RED DSMC2 Expander Modules.