The 75' HD-SDI Belden 1855A RG59 Coax Cable from Laird Digital Cinema is a low-profile, lightweight BNC video cable that supports HD-SDI and SDI transmissions. This 23 AWG cable consists of a Belden 1855A sub-mini cable with a male Kings 2065-11-9 BNC connector on each end.

75-Ohm 23 AWG Belden 1855A RG59 Cable    Low Profile, Light Sub-Mini Design    Kings 2065-11-9 Male BNC Connectors    Copper Conductor, FHDPE Insulation    Duofoil/TC Outer Shield, PVC Jacket    For HD-SDI & SDI Transmissions    Sweep Tested to 3 GHz

Sub-miniature Belden 1855A cable with a low-profile, lightweight design

Kings 2065-11-9 male BNC connector on each end

For HD-SDI and SDI video transmissions

Related Questions and Answers

Q: 1. What is the furthest usable distance before you start having problems with this type of cable? Can I connect two or three of these cables together? I would like to run a camera from the gate at the end of my driveway to my home.

A: Figure no more than 328 feet depending upon the resolution and frame rate of the cameras.

Q: 2. Is there a split cable to support Timecode and RED Control through a single cable?

A: For Timecode and control, you need this: https://www.bhphotovideo.com/c/product/1570780-REG/red_digital_cinema_720_0058_komodo_expander_module.html?sts=pi&pim=Y

Q: 3. Is this cable compatible with camcorder that use 3g SDI?

A: No it is not.

Q: 4. Is this compatible with the TH-42PF20U?

A: Yes, the Panasonic TY-FB9HD HD-SDI Terminal Board (BNC) is compatible with the Panasonic Full-HD Professional Plasma Display (42 ) B&H # PATH42PF20U MFR # TH-42PF20U.

Q: 5. Would this cable only work on RED or would it work on any other cameras with a Mini XLR input (say BMPCC 4K)?

A: I am not using my cable on a camera, but am using it on a Velodyne subwoofer with a calibration mike. Since it is a standard gender changer, I don't see why it would not work on your camera. I purchased mine because the mini XLR connector on my Velodyne is recessed and other cables I tried would not fit in the recessed hole. This cable is very well made.

Q: 6. Will this work with a PTZ controller to a PTZ cam (like PTZ optics)?

A: Yes

Q: 7. Is this backwards compatible with older Blackmagic Video Assist models? For example, could this cable connect a RED Komodo 12G-SDI output to a Blackmagic Video Assist with a 6G-SDI input?

A: The Blackmagic Design Micro BNC to BNC Male Cable for Video Assist (27.6") would not be compatible with the Blackmagic Video Assist with 6G-SDI input due to the Mini DIN connectors that model used.

Q: 8. Is this rated at 12G?

A: Yes, this cable is 12G rated.

Q: 9. Can it work to connect the new pyxis to the video assist 5” 3g? And is this made by blackmagic?

A: Yes, in order to connect the Blackmagic Design PYXIS 6K Cinema Box Camera to any models of the Blackmagic Design Video Assist recording monitors the Blackmagic Design Micro BNC to BNC Male Cable for Video Assist will indeed be needed.

Q: 10. How do you disconnect

A: To disconnect the Blackmagic Design Micro BNC to BNC Male Cable for Video Assist (27.6"), you'll need to twist and pull the BNC connector.