Counter Depth Refrigerator Dimensions With Panels

Dmg Lumiere Rabbit Ears Adapter For 2 Mini Switch Or Mix Panels

Product Code: ga80111
Availability: In Stock

$702.00 $863.46

Qty

4 reviews Write a review

Description
Reviews (4)

The Rabbit Ears Adapter for 2 MINI SWITCH or MIX Panels from DMG Lumiere allows current owners a generic Rabbit Ears mounting system to use two MINI LED panels with it.

Use Generic Rabbit Ears on 2 MINI Panels

Parameters
Material of Construction	Metal
Dimensions	18.9 x 8.3 x 1.6" / 48 x 21 x 4 cm
Weight	3.53 lb / 1.6 kg

Related Questions and Answers

Q: 1. What front diffuser is included? I would like to buy some options, but don't want to buy the same diffuser.

A: A standard 1 stop diffuser is included with the TRP Octa 5.

Q: 2. What are the interior dimensions?

A: The manufacturer only lists a external spec. The case is designed for a specific fixture. Exterior Dimensions (W x H x D) 28.3 x 13 x 13" / 72 x 33 x 33 cm

Q: 3. Hi, Are the dimensions indicated (28.3 x 13.0 x 13.0") the inside, the outside or overall dimensions? Thanks Mathieu

A: Hi Mathieu, so sorry for the very long delay in answering. Yes those are outside overall dimensions. Thanks Jean

Q: 4. is there a way to adapt this octa to Rabbit Rounder for Bowens Mount?

A: Yes, this TRP Worldwide OCTA 5 Snapbag for Rabbit Ears Frame Mount can work with the Rabbit Rounder for Bowens Mount.

Q: 5. will this fit the aputure nova?

A: Unfortunately, this product is not compatible with the Aputure Nova P300C. A compatible softbox option is the Chimera Pop Bank for Aputure Nova P300c, BH # CH1618 https://bhpho.to/3hxHHAM

Q: 6. Will this work on the Lupo Superpanel 60 1x2?

A: Unfortunately, the TRP WORLDWIDE RABBIT-EARS Rectangular is not compatible with the Lupo SuperPanel 60 1 x 2 panel. There is the Lupo Snapbag Softbox for Superpanel 60, BH # LU432 which is the dedicated softbox. https://bhpho.to/3AgV7e9

Q: 7. Will this slide onto the CreamSource Vortex8 2x1 Panel?

A: It has not been tested but it should work fine. The size is correct for TRP WORLDWIDE RABBIT-EARS Rectangular to work with the Creamsource Vortex8 2x1.

Q: 8. Will this work with the OCTA 7?

A: No, the following brackets will work on the following light fixtures Creamsource Micro Aputure Nova 200 Cosmolight Infinity 200

Q: 9. Will this fit the nova p600 from aputure?

A: This OCTA 5 Snapbag is not compatible with the Nova P600.

Q: 10. If I already have an Octa 5 Snapbag with a bowens mount, am I able to replace the bowens mount and use this instead?

A: No, the Octa 5 Snapbag with a bowens mount is made differently and does not work with the TRP WORLDWIDE RABBIT-EARS Rectangular.

Ryan	13/09/2024
This was entirely an impulse purchase. I mean, who doesn't have a key or a coin within reach 99% of the time? As it turns out I really, really like this thing. It feels really substantial in the hand. The business end is nice, thick, and square which gives it a nice positive feel when torquing down on a screw and doesn't feel like it's going to cam out of the slot like a coin might. Because the top part is only as wide as a US quarter I don't feel like I have the same potential to over-torque and damage anything like I could with the long end of a hex wrench. Some have commented that it's too thick for the slots in some of their screws so for those of you with burdened (or blessed) with tight slots here's some numbers: Using a dial caliper the tool end measures .423 wide (10.72mm, 27/64) and .074 thick (1.88mm, or just a hair under 5/64). By comparison it is thicker than a the edge of a 2001 US quarter but not by much - the reference quarter from my pocket measures .068 thick (1.73mm, or a hair over 1/16). Basically, if your slot is a tight fit for a US quarter this might not work for you. I tried it with every slotted camera accessory screw I had within reach and it fit all of them. 5