Video Camera Door Phone Intercom Doorbell

Axis Communications A8207-ve Mkii Network Video Door Station

Product Code: ga80186
Availability: In Stock

$4,797.00 $6,332.04

Qty

8 reviews Write a review

Description
Reviews (8)

The A8207-VE MkII Network Video Door Station from Axis Communications combines video intercom and access control functionality in one unit. It features two-way audio with noise reduction and echo cancellation, an RFID reader, a wide-angle camera that captures 6MP video from a 180° horizontal field of view, a keypad for dialing and PIN verification, a PIR motion sensor, and a built-in memory card slot that accepts microSD/SDHC/SDXC cards (available separately).

This door station complies with ONVIF profiles S & G for interoperability with a wide range of devices. It is housed in an IP66- and NEMA 4X-rated enclosure to protect it from the elements. Additionally, the front glass is rated IK08 for protection from impact and scratches.

Video Door Station with 6MP Camera Two-Way Audio Noise Reduction and Echo Cancellation RFID Reader for Access Control Numeric Keypad PIR Motion Sensor Card Slot Supports microSD/SDHC/SDXC Complies with ONVIF Profiles S & G IP66 & NEMA 4X Rated for Outdoor Use IK08-Rated Glass

Parameters
Image Sensor	1/2.9" Progressive Scan RGB CMOS
Lens	1.56mm, f/2.8 Fixed Focus, IR Corrected, Fixed Iris
Field of View	Horizontal: 180° Vertical: 120°
Minimum Illumination	LED Lit: 0 Lux LED Unlit with WDR: 0.7 Lux LED Unlit without WDR: 0.55 Lux
Shutter Time	1/143,000 to 2 Seconds (50/60 Hz)
Video Compression	H.264 (MPEG-4 Part 10/AVC) Main and High Profiles, MJPEG
Resolution	3072 x 2048 to 160 x 90
Frame Rate	Up to 30/25 fps (60/50 Hz) in all Resolutions
Video Streaming	Multiple, Individually Configurable Streams in H.264 and MJPEG Axis Zipstream Technology in H.264 Controllable Frame Rate and Bandwidth VBR/MBR H.264
Image Settings	Saturation, Contrast, Brightness, Sharpness, Forensic WDR up to 120 dB, White Balance, Exposure Mode, Exposure Zones, Compression, Text and Image Overlay, and Privacy Masks
PTZ	Digital PTZ
Audio Streaming	Two-Way, Full Duplex Echo Cancellation and Noise Reduction
Audio Compression	384-Bit LPCM, AAC-LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Opus 8/16 kHz Configurable Bit Rate
Audio Inputs/Outputs	Line Input, Line Output, Dual Built-In Microphone (Can Be Disabled), T-Coil, Built-In Speaker (73 dB at 19.7" / 50 cm)
Amplifier	Built-In 2 W Class D Amplifier
Card Reader	RFID
Entry Authentication	Card, Tag, PIN, Door Code
Alarm Status Indication	User Feedback for Access Granted, Access Denied, Keypad, Armed, Disarmed
Supported Protocols	RS-485 (OSDP), Wiegand, Vapix Reader Interface
Reader Technology	Generic 13.56 MHz (MIFARE Classic, MIFARE Plus (Level 1), MIFARE DESFire EV1 and EV2, HID iCLASS, HID iCLASS Elite) Proximity 125 kHz (HID Proximity Cards, EM-42xx, ISOProx II)
Hearing Loop	T-Coil 4 W Class D Amplifier
Feedback	User Feedback: Illuminated Symbols, Indicator Stripe, Illuminated Buttons, Audible Feedback
Detection	Tamper Switch, Accelerometer (Shock Detection), Video Tampering
Security	Password Protection, IP Address Filtering, Signed Firmware, HTTPS Encryption, IEEE 802.1X Network Access Control, Digest Authentication, User Access Log, Centralized Certificate Management, Secure Boot
Supported Protocols	IPv4/v6, HTTP, HTTPS, SSL/TLSa, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, SIP, SIPS, LLDP, STUN, TURN
Application Programming Interface	Open API for Software Integration, Including VAPIX and AXIS Camera Application Platform AXIS Guardian with One-Click Connection ONVIF Profiles S and G
VoIP	Support for Session Initiation Protocol (SIP) for Integration with VoIP Systems, P2P, or Integrated with SIP/PBX Tested with Various SIP Software such as Cisco, Bria, and Grandstream Tested with Various PBX Software such as Cisco, Avaya, and Asterisk Phone Book, Parallel Call Forking, Sequential Call Forking, Call Extension Dialing
Analytics	Included AXIS Video Motion Detection, Active Tampering Alarm, Audio Detection Supported AXIS Guard Suite Including AXIS Motion Guard, AXIS Fence Guard, and AXIS Loitering Guard Support for AXIS Camera Application Platform Enabling Installation of Third-Party Applications
Event Triggers	Analytics, External Input, Edge Storage Events, Virtual Inputs Through API Call: DTMF, State, State Changes Detectors: Audio Detection, Live Stream Accessed, Shock Detection, Tampering, PIR, Motion Alarm Hardware: Casing Open, Temperature, Relays and Outputs, Network Input Signal: Digital Input Port, Manual Trigger, Virtual Inputs Storage: Disruption, Recording System: System Ready Time: Recurrence, Use Schedule PTZ: Moving, Preset Reached
Event Actions	Axis Door Control HDMI Make Call: SIP, API Terminate Call: SIP, API Record Video and Audio: SD Card and Network Share Upload of Images or Video Clips: FTP, SFTP, HTTP, HTTPS, Network Share, and Email Pre- and Post-Alarm Video or Image Buffering for Recording or Upload Notification: Email, HTTP, HTTPS, and TCP External Output Activation, Play Audio Clip, Overlay Text, PTZ Controls, Status LED, WDR Mode
Data Streaming	Event Data
Casing	IP66 and NEMA 4X Rated, IK08 Impact- and Scratch-Resistant Glass Aluminum Casing, Polycarbonate Hard-Coated Dome Color: Metallic Dark Gray
Sustainability	PVC Free
PIR Sensor	PIR Motion Sensor
Memory	2048 MB RAM, 512 MB Flash
Power	Power In: PoE 802.3af/at Type 1 Class 3, or PoE+ 802.3at Type 2 Class 4, or 8-28 VDC, Minimum 25 W Power Consumption: Typical 8 W, Maximum 22 W Power Out: PoE 802.3af/at Type 1 Class 3: 24 V / 0.05 A or 12 V / 0.1 A PoE+ 802.3at Type 2 Class 4, or 8-28 VDC: 24 V / 0.3 A or 12 V / 0.7 A Relay Rating: 30 V / 1 A
Connectors	100M RJ45, PoE I/O: 6-Pin Terminal Block for 4 Alarm Inputs/Outputs DC Input, 2 Relays, Line Out, Line In, Micro-HDMI, RS-485/Wiegand
Storage	Support for microSD/SDHC/SDXC Cards Support for Recording to NAS
Operating Conditions	-40 to 131°F / -40 to 55°C Humidity: 10-100% RH (Condensing)
Storage Conditions	-40 to 149°F / -40 to 65°C
Approvals	EMC EN 55032 Class A, EN 55024, EN 61000-6-2, FCC Part 15 Subpart B Class A and Subpart C and Subpart E Safety IEC/EN/UL 62368-1, IEC/EN/UL 60950-22, UL 293, UL 294 Environment IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-6, IEC 60068-2-78, IEC/EN 60529 IP66, IEC/EN 62262 IK08, NEMA 250 Type 4X Other EN 300330, EN 62311, RSS-Gen, RSS-210, EN 301 489-3, EN 303 348
Dimensions	9.8 x 4.2 x 2" / 248 x 106 x 51 mm
Weight	2.9 lb / 1.3 kg
Packaging Info
Package Weight	3.615 lb
Box Dimensions (LxWxH)	12.8 x 6.4 x 3.8"

Open API for software integration

Integrates with VoIP systems

Remote entry control

RFID reader

Supported protocols include RS-485 (OSDP), Wiegand, and VAPIX reader interface

PIR motion sensor

Analytics include Axis Video Motion Detection, active tampering alarm, and audio detection, with support for Axis Motion Guard, Fence Guard, Loitering Guard, and third-party applications

Tamper switch, accelerometer (shock detection), and video tampering

Dual built-in microphone (can be disabled) and speaker

T-coil hearing loop

6MP camera

0 lux minimum illumination with LED lit

H.264 and MJPEG video compressions

Axis Zipstream technology

Digital PTZ

Supports recording to network-attached storage

PoE+ support

Connectors include 100M RJ45 Ethernet port, 6-pin terminal block for four alarm inputs/outputs, DC input, two relays, line out, line in, micro-HDMI, and RS-485/Wiegand

Aluminum case and polycarbonate dome for durability

PVC free

Related Questions and Answers

Q: 1. What is the maximum distance of transmission?

A: This is a very specialized product that may require direct contact with Sony regarding. Here is their Professional Support Contact Information. Phone: 800-883-6817, 8:30 a.m. - 8:00 p.m. ET, Monday - Friday Email: bis.product.support@am.sony.com

Q: 2. Can this be used at the mobile base station to send back to studio?

Q: 3. Can this be mounted in a single-gang junction box?

A: The Hikvision DS-KD8003-IME1 Video Intercom Module Door Station with Flush Mount BH #HID83IME1FLS offers: Installation Surface mounting & flush mounting Dimensions (L× W × H): 98 mm × 100 mm × 42 mm (3.86" × 3.94" × 1.65"). Single gang electrical boxes are generally about 2 x 4 inches in size, with depths ranging from 1 1/2 inches to 3 1/2 inches.

Q: 4. Can VTO2311R-WP have a non-admin Dahua camera protocol (not just ONVIF) user account added for the NVR?

A: The Dahua Technology DHI-VTO2311R-WP 2MP Wi-Fi Villa Door Station (BH # DAVTO2311RWP) cannot utilize a third-party admin protocol. It complies with ONVIF profiles G, M, S & T.

Q: 5. Does this work with mac?

A: The Kensington SD4839P Triple Video Docking Station is not intended for use with Mac computers, so results may vary.

Q: 6. Can the tablet work work while on the charger?

A: Yes, the screen is meant to be connected to a power supply in order for it to power up and work.

Q: 7. What is the difference between this model, and previous Sony PWS-110RX1?

A: Hi Dejan D, The new PWS-110RX1A has an updated CPU board, and adds future HEVC support. Otherwise all other specs and features are identical to the PWS-110RX1. Ralph

Q: 8. Can the door station be mounted over an existing peephole if battery powered?

A: From what I saw in the installation video, it looks like it needs to be mounted on a wall like you would a doorbell or other WIFI video doorbells.

Q: 9. IF I PURCHASE 2 OF THESE, CAN I VIDEO CHAT DIRECTLY OVER A LAN?

A: You would need to home run both to an Ethernet switch and program them to speak with each other, but yes, the Aiphone IX-MV7-B IP Video Master Station (Black) would work.

Q: 10. What is the overall dimensions of this device? Width x Height x depth

A: Dimensions 4.88 x 5.28 x 2.28" / 124 x 134 x 57.88 mm

Frederick V	25/09/2024
Very usable and very adaptable. Well built. 5

Thomas	05/09/2024
I was going to make one but then decided to try this one out, I am super happy with it. I been an avid storm chaser for 30 years and had a mount for the window which in turn always end up with the camera getting soaked. I love how I can set this back into the car and helps with rain on the front lens and the quality of this mount it rock solid. One less thing I had to try to build and works better then I thought. 5

Khaled M	21/08/2024
I used it with my 600mm canon lens it is perfect, i recomand it. 5

David	25/07/2024
Expensive BUT worth it in my view More bulky to travel with . But like it better IF I don't have to fly with it vs Bean Bag. Very secure platform for long lenses Don't have to worry about falling out the car door.. 5

Wayne	16/07/2024
Well made product 5

Johnathan R	05/07/2024
I use this in areas where I cannot get out of the car. I go on a wildlife drive and it's not safe or allowed to be in the same area with Bison. I use this Car door lens support mount with a Wimberley WH-200 Gimbal head. My lens setup is a 600 f/4 II prime with a 1.4 or 2x III extender. I can rotate it enough to get it inside the window so I can close the window during cold weather months. You can either mount it inside or you can mount it outside of the vehicle on the door with some minor modification. It has a bubble level which is nice but I rarely use it because the vehicle is rarely on a level surface. I use the in camera level instead and adjust the camera accordingly. I do shut off the car at times to get sharp photos and avoid motor vibration. This is an awesome setup but you are limited to the side you have it mounted on. I would keep a smaller 100 - 400 handheld setup to take photos on the opposite side of the vehicle. The screw does want to thread into the metal. which can make it difficult to remove the gimbal at times. I just make sure I apply upward pressure on the knob to avoid it hopefully they will fix this in a future revision but not a deal breaker. 5

Richard	04/06/2024
Like another reviewer, I am disabled and can only shoot from the driver’s seat (using Nikon 200-500mm and gimbal head). The Eckla Eagle is very well made and designed. My only quibble is that the vertical edge that slides down into the door window slot is not very “deep,” only about ¾ inch. That allows the entire platform to slip out if lifting the lens upward, or if driving slowly over a bump or curve (slow speeds on deserted roads only, of course). I glued a 2” sheet metal “extension” to that edge for a “deeper” penetration into the window slot. I also added a bungee cord attached to the bottom of the door to exert a downward pull on the EE. Another reviewer described being able to raise the window while the EE is in place. That means that only the interior plastic door panel, (fairly flexible on most modern vehicles), and not the window glass, is supporting his EE. To me, this is not nearly rigid enough. I hook the EE edge OVER the window glass, in its lowered position, for the most rigidity possible. Car window glass is easily strong enough for this. In fact, the EE is designed so that one can reverse the window slot edge piece so that it grips only the window glass, when raised 2+ inches. 5

Robert	01/06/2024
I am able to mount a video head on this support and video comfortably from the car at high magnification and the full range of motion. Easy to install. 5