You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Nanuk 918 Hard Case With Foam Insert For Six Lenses (yellow, 21l)

Nanuk 918 Hard Case With Foam Insert For Six Lenses (yellow, 21l)
  • Product Code: ga80766
  • Availability: In Stock

$659.85 $1,035.96

Keep a set of six lenses protected during transport and storage in this 21L, yellow Nanuk 918 Hard Case. This IP67-rated case has a built-in purge valve, a robust top handle, and an O-ring sealed beveled lid. It keeps your contents protected against dirt, dust, impact, and moisture. The foam insert accommodates various lense sizes including 8-15mm, 24-70mm, 24-105mm, 17-40mm, 17-55mm, and 100mm. The precut, low-abrasion, closed-cell foam holds your lenses either mount up or down based on your preference. Each slot has two removable foam discs to custom fit long or short lenses and finger notches to help you safely and easily insert and remove your lenses.

Carry the 918 case with the comfortable, oversized top handle. For added security, the case accepts user-supplied padlocks. Other design features include handle and lid stays, solid and reliable PowerClaw latches, and durable stainless steel hardware. The case is made from lightweight but tough NK-7 resin and has a 40 lb maximum buoyancy. Designed to be stackable, the IP67-rated dust and waterproof case has a purge valve to ensure it remains easy to open, even after changes in air pressure.

2 PowerClaw Latches    IP67-Rated, Dust and Water Resistant    Precut, Low-Abrasion, Closed-Cell Foam    Impact-Resistant NK-7 Resin Construction    Stackable Design, Built-In Purge Valve    Accepts User-Supplied Padlocks    Beveled Lid with Waterproof O-Ring Seal    Handle and Lid Stays

Key Specs
ColorYellow
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeInsert with Custom Compartments, Convoluted/Layered Foam
Water ResistanceWaterproof (Material)
IP67
DimensionsExterior
16.9 x 12.9 x 9.3" / 42.9 x 32.8 x 23.6 cm
Interior
14.9 x 9.8 x 8.6" / 37.8 x 24.9 x 21.8 cm
Weight7.41 lb / 3.36 kg
Parameters
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeInsert with Custom Compartments, Convoluted/Layered Foam
Features
ATA CompliantYes
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof (Material)
IP67
Maximum Buoyancy40 lb / 18.1 kg
Maximum Volume5.4 gal / 20.6 L
Padded InteriorYes
MaterialsExterior: Resin
Insulation: Foam
DimensionsExterior
16.9 x 12.9 x 9.3" / 42.9 x 32.8 x 23.6 cm
Interior
14.9 x 9.8 x 8.6" / 37.8 x 24.9 x 21.8 cm
Weight7.41 lb / 3.36 kg
Packaging Info
Package Weight8.255 lb
Box Dimensions (LxWxH)17.1 x 13.7 x 9.6"

  • Upper Hole Diameter: 4"
  • Upper Hole Depth: 2"
  • Lower Removable Plugs Diameter: 3.125"
  • Lower Removable Plugs Depth: 4" (one 1.5" layer and one 2.5" layer)

Related Questions and Answers

Q: 1. Would the Canon RF 24-240mm f/4-6.3 IS USM fit?

A: Yes. The case will accommodate the following lens 8-15mm, 24-70mm, 24-105mm, 17-40mm, 17-55mm, and 100mm.

Q: 2. Can you tell me if this will hold a set of Rokinon Cine DS lenses? ( 16, 24, 35, 50, 85, 135mm).

A: Yes this case can hold those Rokinon lenses.

Q: 3. Will Irix cinema lenses fit?

A: Yes, Irix Cine lenses will fit in the Nanuk 918 6-Lens Case with Foam Insert (Black).

Q: 4. Can the Meike ff cine prime lenses PL mount fit in ?

A: Yes, the Meike Full-Frame Cine Prime PL-mount lenses will fit in the Nanuk 918 6-Lens Case with Foam Insert (Black).

Q: 5. Can I fit 6 DZO Vespid PL mount lenses in the 6-lens Foam Insert?

A: The DZOFilm VESPID 6-Lens Kit A (PL & EF Mounts), B&H # DZVKAPLM, would be too large for the foam inserts. The alternative would be the DZOFilm 4-Lens Hard Case for VESPID Primes (B&H # DZOCASEV4). https://bhpho.to/3zLO0aL

Q: 6. Can this hold a Sigma 50-100 F1.8?

A: Yes.

Q: 7. Would the Canon RF 85mm f1.2/L USM DS fit?

A: Yes.

Q: 8. Does this case fit for the Samyang VDSLR mark II (14mm, 24mm, 35mm, 50mm & 85mm)??

A: The pre-cut holes will not fit the Samyang lenses so I would recommend this case with dividers: B&H # NA9182001 MFR # 918-2001 https://bhpho.to/3aJ0h5Q

Q: 9. Would the Canon EF 70-200 f/2.8 fit there? Its length is 8.5 inches, but I read that 24-105 f/4 would be the largest, which is much smaller ...

A: The Canon EF 70-200mm f/2.8L IS USM lens would be just a bit too long to fit this case.

Q: 10. Would Leica Summicron C fit in here?

A: Unfortunately no. The size for each lens in the Nanuk 918 Case with Foam Insert for Set of Six Lenses is 4 inches by 8.5 inches and the Leitz Summicron C lenses are larger than 4 inches in diameter. I would recommend either the foam insert version https://bhpho.to/3eztYYT or the divider version: https://bhpho.to/36Rfyil The Divider version is more adaptable in case you change which lenses or other accessories you might be carrying.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Evergreen Cases 35mm Film Case (clear)

$120.00 $192.00

Rokinon Xeen 6-lens Carry-on Case

$897.00 $1,085.37

Nanuk 909 Hard Case (red, 8.8l)

$179.85 $228.41

Seahorse 56f Micro Case With Foam (green)

$89.34 $126.86

Seahorse 52f Micro Case With Foam (green)

$68.40 $109.44

Linhof Systainer Case

$1,595.85 $2,042.69

Vinten 3355-3 Transit Case

$4,845.00 $6,831.45

Sachtler Lite Case (medium)

$599.91 $827.88

Birddog 5-year Extended Warranty For Og4

$2,245.50 $3,502.98

Products You May Like

Tvlogic 9" Uhd 4k Input-ready Sdi/hdmi Lcd Monitor

$10,516.50 $14,933.43

Cobalt Analog Video Distribution Amplifier Card

$1,266.00 $2,012.94

C2g 7-port Usb 2.0 Hub

$77.97 $95.12