This gray 3 Legged Thing Albert 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 49.4" height or can be combined with the center column to form a monopod with up to 74.6" in height.

Tripod heads that are compatible with a 3/8"-16 mount can be connected to the top of the Albert 2.0 Tripod. When configured as a tripod, the Albert 2.0 Tripod supports up to 66.0 lb and measures 16.9" when folded. Each of its 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 4.7" when its 3-section, push-and-pull rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 48.0" or 71.6" with the center column fully raised. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Albert 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.

Load Capacity: 66.0 lb    Max Height: 71.6", Min Height: 4.7"    Folded Length: 16.9"    Leg Sections: 5, Weight: 4.1 lb    Carbon Fiber Legs, Bubble Level    Twist Locks, Rubber Feet    3-Position Leg Angle Locks    Reversible, Multi-Section Rapid Column    Monopod-Convertible Legs and Column    Carry Case with Strap

• Support system with three detachable legs and removable center column
• Each leg can be configured as a monopod with up to a 49.4" height or can be combined with the center column to form a monopod with up to 74.6" height
• As a tripod, supports up to 66.0 lb
• Push-and-pull center column for rapid camera, lens, or sport optic positioning
• Center column D-ring to accommodate ballast for additional stability
• Can be set for a minimum height of 18.9" or 4.7" without the center column
• All three legs can be extended in the tripod configuration to obtain a maximum height of 48.0" or 71.6" with the center column fully raised
• Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
• Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
• Legs can be locked at 23, 55, or 80° angles
• Rubber feet help to enhance stability on a wide variety of surfaces
• Weighs 4.1 lb and measures 16.9" when all three legs are reversed 180° and folded
• Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
• Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
• 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
• Carry bag with strap for storage and transport

• Carbon-fiber legs
• 3/8"-16 mount

Related Questions and Answers

Q: 1. Does the Trent 2.0 come with a wrist strap?

A: Unfortunately, the 3 Legged Thing Trent 2.0 Magnesium Alloy Monopod (Blue) does not include a wrist strap.

Q: 2. This tripod has no aluminum at all? Others on the web claim a mix of magnesium and aluminum. Want to be sure 100% magnesium.

A: The 3 Legged Thing Charles 2.0 Darkness Magnesium Alloy Tripod (Matte Black) is made of a magnesium alloy--"alloy" means that something is mixed with the magnesium, usually aluminum.

Q: 3. Can I use this with the iFootage CB3 C180F monopod base? also, is it strong enough to handle a Sony FS5 (weight 10 lb)?

A: Yes, the 3 Legged Thing AirHed Pro Ball Head (Matte Black) is compatible with the iFootage CB3 C180F Carbon Fiber Monopod with Mini Tripod Base, and it would be more than strong enough to handle the 5-lb Sony FS5 (including a lens).

Q: 4. What is the overall height of this ballhead?

A: 3 Legged Thing AirHed Pro Ball Head height is 88mm/3.46''.

Q: 5. Material of construction is listed as 'steel'. What kind? Case-hardened, stainless, carbon, etc?

A: According to the manufacturer, our overview lists the 3 Legged Thing STILETTOZ as made of strong and durable milled stainless steel for longevity and greater stability on hard surfaces like concrete and gravel.

Q: 6. This tripod is entirely magnesium? No aluminum at all?!

A: The 3 Legged Thing Charles 2.0 Darkness Magnesium Alloy Tripod (Matte Black) is made of Magnesium alloy. Magnesium alloys are mixtures of magnesium (the lightest structural metal) with other metals (called an alloy), often aluminium, zinc, manganese, silicon, copper, rare earths and zirconium.

Q: 7. Would this work with an L bracket?

A: Yes, this Arca Swiss head is compatible with Arca Swiss compatible L brackets.

Q: 8. Is this solid enough to use with a benro gimbal head?

A: The 3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head (Bronze and Blue) is sturdy enough to use with a gimbal head.

Q: 9. Do you know the load capacity when used as a monopod?

A: anything under 10 kg / 22 lb from top-down and you won't have an issue, if you're using the monopod at an angle or as a boom arm this will vary on circumstances.

Q: 10. What are the diameter of the Graphite legs ? Layers?

A: As per our measurement, the thickest leg section measures around 2 7/8" inches.