The Luminex LumiNode 12 DMX Interface is s full 19" rack unit that offers a very high density of DMX/RDM ports. Featuring processing power and advanced network communication with your control system, the LumiNode 12 provides up to 16 processing engines and up to 12 DMX ports for greater data communication in your lighting. With more processing capacity and more flexibility, the LumiNode 12 offers the capability to merge up to four input sources and is easy to adapt to future protocols, meaning less cost and more options as your system grows into the next generation of lighting and network control.

6 x Processing Engines    12 x DMX Ports

• Full 19" high-density rack unit
• Twelve DMX/RDM 5-pin connectors, fully isolated
• One RGB LED per DMX/RDM port for activity indication
• Two etherCON network port at 1 Gb/s with integrated switch
• Link/speed LED indication per Ethernet port
• RGB mode LED indication per Ethernet port
• Color display and control jog for fast configuration
• Contact closure as trigger
• PoE powered (IEEE 802.3af)
• Internal universal power supply with Neutrik PowerCON True1
• Robust steel enclosure with two rack ears

Related Questions and Answers

Q: 1. this adapter work with lightkey software??

A: Unfortunately, the SoundSwitch Micro-DMX Interface is not compatible with the Lightkey Software.

Q: 2. Will this work with a Chauvet DJ DMX-4LED 4-Channel Dimmer Pack?

A: Yes. If the lights you own do not have built-in DMX, then you may use the CHAUVET DJ DMX-4LED 4-Channel Dimmer Pack with the Elation Professional SDC12 12-Channel Basic DMX Controller for your usage needs, allowing you to adjust the light output from the ground.

Q: 3. Will this work to add DMX control to a nanlite FS-300?

A: No, the SoundSwitch Micro-DMX Interface will not allow DMX control from the Nanlite FS-300. The Nanlite FS-300 does not support DMX control.

Q: 4. Will this work with the Litepanels DMX module? I'm planning on using two Astras in a studio grid setting.

A: Yes it will work with the 5 pin DMX512

Q: 5. If I turn off this console, will the connected lights turn off as well?

A: depending on the fixtures and if they have a look store or a when dmx is lost feature, i use them all the time its a great console

Q: 6. Can I hook up these microphones to a Mackie 1403 VLZ3 mixer?

A: The mixer included with the VocoPro USB-CONFERENCE-12 12-Person Wireless Microphone/USB Interface Package (B&H # VOUSBCONFC12) can send audio out to a Mackie VLZ3 mixer, but the included microphones require a receiver and would not be able to connect directly to the Mackie mixer without the use of additional hardware.

Q: 7. will this work with magicq pc software?

A: It supports the Protocol; ArtNet, sACN

Q: 8. Can a 3-pin connector be converted to 5-pin to control the Nova 600 and Nanlite 500/720?

A: Yes, you can step down from 5-pin DMX to 3-pin DMX with the following adapter cable: the Kopul DMX35PA-S 3-Pin Male to 5-Pin Female DMX Adapter Cable (6"). Some functionality may be lost, but it would be minimal.

Q: 9. I have tested with just the only dmx light I have--it works but ony using the #1 slider--can't seem to assign the light to another slider. I'll be getting more dmx lights, so how can I assign lights to the other sliders? (If adjust the light itself to channel 2, I can still only control it with the #1 slider, and I didn't have any luck messing with the dip switches on the controller--I didn't fully understand their explanation of the switches.)

A: If you set the light's DMX address to one more than the address of the controller then it'll be able to be dimmed with slider #2. Set the light to two more than the address of the controller and you can use slider #3 to adjust it, and so on.

Q: 10. New to DMX and their related equipment. The specs for the Elation says it has 1 master dimmer fader and 6 faders. I have 5 LED panels and I want to control each one separately for brightness and color temp. I believe that means I need 10 faders - right? Does that mean I would need two Elation Controllers? Is there another simple/basic option that would allow me to support all of my LED panels via one DMX controller? I don't need fancy programming or preset options.

A: No. The following unit offers six faders which control channels 1-6 and 7-12.