The light beige E2 Unidirectional Earset Microphone with Detachable Cable and Hirose 4-Pin AN cH-Style Connector from Countryman is an over-the-ear earset, similar to a classic E6 earset, but with a shorter boom designed to work with Audio-Technica wireless microphone systems. It provides suitable isolation at the mouth, but with less visibility than an E6 omni earset, and can be used to capture audio for general speaking and vocal applications.

With an equalizing circuit built into the audio connector, the frequency response is tuned so you can experience full-bodied bass and precise highs that are warm and natural. The element, boom, and sub-miniature connector are all easily hidden on the user's face. The boom position near the ear helps to eliminate breath pops and vocal plosives on the mic. The detachable cable terminates to a Hirose 4-pin AN cH-Style connector for direct connection to an Audio-Technica 4000 Series, 5000 Series, or 7000 Series bodypack transmitter.

For Audio-Technica Wireless Transmitters    20 Hz to 20 kHz Frequency Response    For General Speaking and Vocals    Fits over the Ear    Includes Carrying Case    Black and White Cable Clips    Windscreen and Protective Cap

The E2 Earset redefines pure sound in a virtually invisible package. It offers better ease of use than a lavalier or podium microphone.

There are two aspects of the E2 design that make it possible to capture sound so far away from the mouth: strong off-axis rejection and precisely tuned frequency response. For on-axis interference, the frequency response tuning in the connector of the E2 allows you to fully capitalize on the proximity boosting effect of the mic to achieve even stronger isolation in the voice band.

Like the connector for the industry-standard E6, the connector for the E2 is built tougher and more water resistant than previous models.

Standard gain, for speaking and vocals.

Related Questions and Answers

Q: 1. Does it include a mic holder or not?

A: No mic holder

Q: 2. I have a JVC GY-HM170UA camera and bought this microphone, but the camera does not recognize, all possible tests and still the same. Can anybody help me?

A: It would be difficult to determine what the issue may be. The mic requires phantom power to operate. This is provided by the camera when Input is set to the MIC+48V setting. This would be the most commonly overlooked. If you require assistance with your purchase, please feel free to email a Pro Video Representative here at provideo@bandh.com They will be best equipped to assist you.

Q: 3. How is this microphone powered? I'm thinking of a microphone that I can connect to a hand-held digital recorder so that I can capture the comments from a guide in the front of a bus when I'm sitting farther back in the bus in Israel during a two week trip, and I don't think that my recorder does 48 volts.

A: The AG-MC200G uses +48V phantom power and feature a standard XLR output. It cannot work with a device that does not supply + 48V phantom power.

Q: 4. Is the microphone mono or stereo?

A: This is a mono microphone. It is a single channel.

Q: 5. How do I get it on?

A: There is a dedicated on/off switch.

Q: 6. Will this headset work with iPhones?

A: i don't think so

Q: 7. How does this differ from my mic150 shotgun mic?

A: The Panasonic MIC150 has a frequency response of 80 Hz to 16 kHz whereas the Panasonic AG-MC200G has a frequency response of 160 Hz to 20 Hz.

Q: 8. Does this work for any DSLR? I have the Nikon D3100.

A: The Audio-Technica ATR1300 is a dynamic mic which requires no external powering. This makes it widely compatible with devices that feature mic input capabilities. This is true for DSLRs as well as portable audio recorders and similar devices. Unfortunately the Nikon D3100 specifically, does not offer an external mic input jack and would not be able to this or external mics in general.

Q: 9. Do I need phantom power or a audio mixer for this mic?

A: This is a dynamic microphone and by design requires no phantom or external power.

Q: 10. I have a JVC GY-HM170UA camera and bought this microphone, but the camera does not recognize, all possible tests and still the same. Can anybody help me?

A: The Panasonic AG-MC200G requires 48 volts phantom power to operate. The camera must be set to the MIC+48 setting to power the mic correctly. If you are having issues with your purchase, please feel free to contact a Sales Representative here by phone at 800-606-6969 or email audio@bandh.com for assistance