The light beige B2D Directional Lavalier Mic, Low Gain, with Hardwired 3-Pin XLR Connector Cable for Select 3-Pin XLR Devices from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the lowest gain for powerful vocals such as in opera, which requires a higher overload level. In addition, the B2D lavalier is equipped with a hardwired cable that terminates to a 3-Pin XLR connector for direct connection to Select 3-Pin XLR mixers, recorders, and other devices with an XLR connection.

Hypercardioid Pattern    Fits Select 3-Pin XLR Devices    Headroom for Operatic Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Low (blue band, -20 dB re W4) for operatic vocals

Related Questions and Answers

Q: 1. What is the pinout for the XLR connector?

A: The pin out for the XLR connector is 1-negative and 4+ positive

Q: 2. Does this work for a C500 Mark 2?

A: yes this 4pin Xlr power supply will work for the c500mkii

Q: 3. Will this filter RFI from the output of my mixer? If used at the amp?

A: Yes it should filter

Q: 4. Can you charge 4 b-mount batteries simultaneously?

A: Yes. The following unit can simultaneous charger 4 Channel V-Mount batteries.

Q: 5. Hi, I am not sure but with this plate can I power a Zoom H4N through the XLR connector?

A: As it sits this plate will not work. The XLR inputs on the Zoom H4N are for audio only, it does not have an 4-Pin XLR power input. However you could get the Tilta Universal Power Supply System for 15mm Rod Based Systems and add a PowerTap to Mini USB cable to power the H4N.

Q: 6. Can it connect an ipod classic 160 to a fiio Q1mii successfully?

A: This cable is designed for IK Multimedia products. Unfortunately, we cannot guarantee success with the Fiio Q1mii.

Q: 7. What is the maximum length of XLR cable that can be added?

A: The IndiPRO Tools 12V Power Supply with 4-Pin XLR Connection can be extended up to 25ft before experiencing any potential signal degradation.

Q: 8. I have a Galaxy Samsung 6. I have a Galaxy Samsung 6 phone Will this cable work?

A: No, the 30-pin connection is meant for older iOS devices like the iPhone 4, iPhone 4S, or iPad 2. The Samsung Galaxy S6 would use a Micro USB connection. To connect a digital iRig to a device with this connection you would need a Micro-USB to Micro-USB (OTG) cable or a Micro-USB to Mini-DIN connection. https://www.ikmultimedia.com/products/?A=micro-usb-to-mini-din-cable https://www.ikmultimedia.com/products/?A=micro-usb-otg-to-micro-usb-cable

Q: 9. hello, I bought the irig mic studio and the cable did not connect to IPad 2. This cable is used to connect Irig Mic Studio to IPad 2? Do you ship to Brazil? How much? Thank you.

A: Yes, this cable will connect the iRig Mic Studio to the iPad 2 with this cable. For shipping costs, add the item to your cart. This should be shown before check out.

Q: 10. How does this mount on the back?

A: this plate will screw into a cheese plate or a camera back