This 500W, 120V General Brands 500 PAR64 WFL Lamp is a bulb for use in enclosed PAR fixtures and offers a wide beam spread (WFL) of approximately 42 degrees. It has an average color temperature of 2850K, an average life of 2000 hours, and a mogul end prong GX16d base.

Wide Flood (WF) Beam Spread    Average Color: 2850K, CRI: 100    GX16d Base. 2000 Hour Lamp Life

Related Questions and Answers

Q: 1. Will these get hot?

A: Yes they get 500 watts hot

Q: 2. Can you put this 500w bulb into a 420w Pepper light?

A: Although this 500 watt bulb can fit, it is not recommended for use with the LTM Pepper 420. A more suitable bulb is the Ushio EKB Lamp - 420 watts/120 volts, B&H # USEKB. https://bhpho.to/395yPN1

Q: 3. Could these work as replacement bulbs for the ARRI 650-plus lights?

A: Yes, the Osram FTK Lamp (500W, 120V) will work in the ARRI 650W Plus Tungsten Fresnel light.

Q: 4. I have votage all the way to the female end of the stage light can. Why won't the new bulbs light?

A: This lamp requires 230Volts. If you are using 230V then it's the fixture contacts or a defective bulb.

Q: 5. can I use this on an olympus zuiko 50mm 1.8 lens?

A: if the lens is 49mm.. it should say on the front..then sure..

Q: 6. my lamp specifies a ENG Quartz lamp, will this Halogen work the same?

A: Technically it should be the same if the bulb you have is EGN.But double check that the fixture you have uses a bulb that has a Medium Bipost - G22 base and the light fixture can work with 500 watts /120 volts.

Q: 7. Is this usable as a modelling lamp for Profoto Prohead Plus heads (w/ 100mm cover)?

A: Yes this modeling lamp can be used with the Profoto Pro Head Plus Flash Head.

Q: 8. Does this tank include the hangers for placing the film in the tank? Or, in other words, everything I need to actually process the film? Thanks :)

A: Unfortunately it does not include the hangers.

Q: 9. Can these be used as continuous lighting or only as flash?

A: This Ushio EBV Photoflood Lamp is a continuous light source only.

Q: 10. Does this work with a Leica Q with a 28 mm fixed lens and no vignetteing

A: I'm going to mount this hood on a Voigtlander 40mm f1.4 with Fujifilm X-mount cameras, but according to my experiences, the shape of the hood might cause vignetting when you use a 28mm lens on a full frame camera, and maybe OK with a APSC cropped sensor cameras.