Commonly used in stage, studio, and TV lighting fixtures, the 12,000 lumen General Brand 1000W, 120V FFP PAR64 NSP Lamp is a halogen PAR that has a color temperature of 3150 to 3200K, a Narrow Spot Beam Spread (NSP), and a GX16D base. It has a lamp life of approximately 800 hours.

Halogen PAR, 12,000 Lumens    Color Temperature: 3150 to 3200K    Narrow Spot Beam Spread (NSP)    GX16D Base, Lamp Life: Approx. 800 Hours

Related Questions and Answers

Q: 1. will this lamp fit a vari-beam model 7750?

A: The light is so old there their does not seem to be information for a replacement lamp.And it seems many you have this model have changed the lamp socket for a different one.

Q: 2. Does this work with a Leica Q with a 28 mm fixed lens and no vignetteing

A: I'm going to mount this hood on a Voigtlander 40mm f1.4 with Fujifilm X-mount cameras, but according to my experiences, the shape of the hood might cause vignetting when you use a 28mm lens on a full frame camera, and maybe OK with a APSC cropped sensor cameras.

Q: 3. These are quite a lot cheaper than other brands. Whats the trade off?

A: The bulb can break while trying to remove it and as such it is very difficult to remove the plastic base which is stuck in the socket. As such, I will be purchasing the metal based ones next time...I would advise you to do the same...

Q: 4. Is this the bulb you would use for a Ianiro Varibeam 1000 ?

A: No,I use the bulb for ianebeam 800 and arrilite 1000.

Q: 5. Are these halogen?

A: Yes, they are halogen lamps (which also means they generate a lot of heat!).

Q: 6. Does this tank include the hangers for placing the film in the tank? Or, in other words, everything I need to actually process the film? Thanks :)

A: Unfortunately it does not include the hangers.

Q: 7. what is the length of this lamp?

A: Maximum Overall Length (MOL)3.75" / 9.52 cm

Q: 8. Will this work with a Canon LTM 50 mm 1.4 without vignetting?

A: Yes, it will work without vignetting but it may block some of your view through the viewfinder. It blocks about 30% of the view on my Canon 7s mounted to a canon 50 mm 1.4 LTM. For this reason, and the fact that it looks cheap, I went with smaller metal hood I purchased elsewhere.

Q: 9. works on sony a6000 ?

A: No, this will not work. This 49mm Reverse Adapter will only work on A-mount Minolta/Sony cameras (Sony's DSLT cameras rather than their mirrorless ones).

Q: 10. Will this work with a side pinch cap?

A: Not very well. Cap pops off often.