The Photogenic Lithium-ion Battery for ION Inverter is able to deliver hundreds or even thousands of full power flashes depending on the flash head in use. For example, Photogenic's 1,000W/s PL1000DR gets 300 full power flashes on a fully charged battery while their AKC160 will get a whopping 2,050 flashes from the same battery. It can be charged within or outside the inverter and accepts 100VAC to 265VAC from an optional charger. Note: requires ION Inverter for use.

3.0 - 4.0 Hour Charge    300 - 2,050 Full Power Flashes    Can be Charged Outside Inverter

Related Questions and Answers

Q: 1. What is the typical time to charge the unit so it has a 100% charge

A: I only had it for a week, then returned it. Charged it twice. Took about 3-4 hrs. My problem was it didn't give nearly the amount of flashes that they advertised. Maybe it was the units I was using it with, photogenic 1250s. I don't know. Hope this helps.

Q: 2. will this work with a norman d12 pack?

A: This pack is not rated for 1200 watts , it will work at half power

Q: 3. Is this compatible with two, sk 400 godox monolight ?

A: Yes.I am using photogenic1250 two of them on location 500w not full power.Modeling light switch off.First bought in april 2013,second one bought in may 2015.At reception make it wireless on 3 wheel light stand.easy to move around.ION photogenic are good for two SK400 moonlight Godox.

Q: 4. Will this work as a replacement of Bowens BW-5555?

A: Unfortunately, this charger is only for the Photogenic ION Power Inverter.

Q: 5. Hi. How does it connect to each light? Are there a series of cords available that plug into the battery and the lights? Thank you.

A: Plug the cord that comes with light in. It is a standard grounded plug. Buy a spare battery incase you have a very long assignment. I have never had the battery run out of power. I use photogenic lights too. Great well built products

Q: 6. i just purchased the Godox QT1200IIIM Flash Head. Will this work with this unit ? thanks

A: The Photogenic ION would not be suitable for the Godox QT1200IIIM.

Q: 7. Will it work if you leave the modelling light on?

A: Best practice is to not use the modeling lamp while on battery power since it will quickly drain the battery.

Q: 8. can this be used as an external power supply for a Canon EOS 7D? If so, what else would I need to do so.

A: You can use that battery inverter but you will need this to plug the camera into it, Canon AC-E6N AC Adapter and DC Coupler DR-E6 Kit B&H # CADRE6K (B&H Kit).And this is another option and it is the adapter and battery Tether Tools Case Relay Camera Power System Kit with Coupler for Canon Cameras with LP-E6 Battery B&H # TECRUPS110K4 (B&H Kit).The bonus on this by Tether Tools is you can add a battery that uses a usb connection and it will not stop the camera. So it is hot swappable.

Q: 9. Is this compatible with Elinchrom BRX 500 Monolight ?

A: I use this with Elinchrom lights! Works great, even with modeling light but lasts longer if modeling light is not on.

Q: 10. Is this battery compatible with Paul C. Buff whitelighting 1600?

A: think it will work with anything that plugs into a wall outlet!