The Saramonic UwMic9 Camera-Mount Wireless Omni Lavalier Microphone System provides vloggers, mobile journalists, and content creators with a quality-sounding, easy-to-use, flexible UHF system that packs a set of sophisticated features into a cost-effective solution.

Built for the rough-and-tumble world of production, the lightweight, all-metal components include a bodypack transmitter with a lavalier mic along with a two-channel receiver that's ready to plug into your DSLR/mirrorless camera, recorder, or smartphone (with a cable available separately).

The receiver's two-channel capability allows you to expand your system in the future with an additional transmitter and microphone (available separately) for 2-person interviews—with no additional receiver necessary.

Simple to operate with minimal setup, the UwMic9 lets you capture clear and natural speech for projects ranging from YouTube vlogs and wedding videos to corporate spots and interviews.

For Mobile Journalism, Video, Vlog    Bodypack Transmitter with Omni Lav Mic    2-Channel Camera-Mount Receiver    Waterproof Hardshell Case    96 Auto-Scan Frequencies    Headphone Output    6-Hour AA Batteries    Up to 8 Mics on Set / 330' Range

• The bodypack transmitter uses a locking 3.5mm connection to secure the SR-M1 lavalier mic. A short press of the power button mutes the mic between takes.
• The UWMIC9’s Auto Scan feature searches among 96 frequencies to find the cleanest available frequency for you, while the built-in infrared sync makes linking the transmitter and receiver a snap.
• Easy-to-understand menus and controls, along with backlit LCD displays, allow you to make quick adjustments under varying lighting conditions.
• The TX9 transmitter can accept mic or line inputs and offers three selectable levels of wireless transmission power. The highest setting is designed to overcome interference in busy RF environments or when the subject is further from the receiver; lower settings conserve battery power.
• A headphone output on the receiver enables real-time audio monitoring, especially useful if your camera lacks a headphone output.
• Power is supplied via AA batteries for up to 6 hours of battery life.
• The system offers a maximum distance of up to 330’ and supports up to 8 mics at once on set.

• For man-on-the-street interviews or if you need to pass the mic between several people, you can add the HU9 wireless handheld microphone.
• Adding the TX-XLR9 plug-on transmitter allows you to connect any handheld microphone of your choice or a shotgun mic for wireless booming. You can even apply 48V phantom for condenser mics.
• A wide selection of optional output cables (available separately) allows you to connect the receiver to smartphones and tablets via Lightning or USB Type-C ports, or the TRRS headphone output. There is also a mini-USB cable for action cameras and a USB Type-A cable for computers.

Related Questions and Answers

Q: 1. Can I use Sennheiser ME 4 cardioid lav mics? This kit seems almost perfect for my needs, with the exception that I need cardioid mics.

A: Yes, the Sennheiser ME 4 Cardioid Lavalier Microphone can be used with the Saramonic UwMic9 2-Person Camera-Mount Wireless Omni Lavalier Mic System.

Q: 2. What is the locking system for the lav mics? (Godox Proprietary, Sennheiser, Sony...)

A: The Godox WMicS1 Pro Kit 2 Two-Person Camera-Mount Wireless Omni Lavalier Microphone System uses the same 3.5mm TRS locking connector and wiring configuration as Sennheiser does for its lavalier microphones..

Q: 3. Is it compatible with other brands using the same frequency ranges?

A: No. This receiver only works with Saramonic UwMic9 system wireless transmitters.

Q: 4. Will the TX9 perform good if I connect the receiver RX9 via the SR-UM10-CC1 to a Zoom H8?

A: Yes, I have connected it to a Zoom H4n recorder with no problems.

Q: 5. Is there a microphone that can be used with one of this systems transmitter to put on a podium?

A: There are a few options for you. 1) You can get the Saramonic UMIC-M2 gooseneck microphone that plugs right into the transmitter. Please the transmitter on the podium and pick up the presenters that way. 2) You can get the Saramonic HU9 handheld transmitter for that system, place it on a mic stand of the podium. 3) You can get the Saramonic TX-XLR9 Plug-On Transmitter and use any XLR mic you want with it. All options are available at B&H. I hope that helps.

Q: 6. How do I output two separate channels on this receiver? I see it only includes one 1/8" TRS to XLR cable.

A: The UwMic9-RX9 Dual Channel Camera Mount Receiver outputs a stereo signal which has both channels in one TRS 3.5mm cable. You can also use a stereo 3.5mm to dual XLR cable like B&H # HOHMX003Y or an equivalent 'Y' interconnect.

Q: 7. As non-diversity, is this system subjected to more dropouts that true diversity? Can anyone shed some light based on experience?

A: A non-diversity wireless system may not have the same distance capability, or frequency agility as a true diversity wireless system.

Q: 8. This wireless mic system can be used with any computer and a mic input line right? Will there be any interference with the wireless radio in this system and wireless frequencies of a laptop?

A: Yes, The receiver output may be connected to a microphone input connector of any device, including computers (better still would be to connect this to an audio interface, USB out of the audio interface, out to computer) or, to a camera microphone input.

Q: 9. Which DPA Adapter do I need to make this TX9 work with my DPA 4060?

A: The DPA 4060 microphone can be used with the DPA DAD6034 MicroDot to Locking 1/8" Mini Connector (B&H # DPDAD6034) or Deity Microphones DA35 Microdot to Locking 3.5mm Adapter (B&H # DEDA35). The Saramonic UwMic9 transmitter uses the same type of 3.5mm (1/8") locking connector as Sennheiser transmitters.

Q: 10. Are the microphones in the set dynamic or condenser?

A: The included lavalier microphones are condenser styles that use plug-in power from the transmitter for operation..