The black Canare Starquad XLRM Cable with Neutrik Unisex XLRM/XLRF (Black, 6') is handcrafted with the super flexible Canare L-4E6S cable and superior Neutrik unisex XLR cable. This cable allows you to switch easily between male and female by sliding housing back and forth. Use Starquad for reduced hum and EMI, and no handling noise. This cable is perfect for all microphone use and great for connecting balanced output of some audio processors, mixers, and low density patch bays to XLR inputs.

Special cross-linked PE insulation

Hand assembly with true silver solder

Pure performance Neutrik XLR and Neutrik Phone connectors

Related Questions and Answers

Q: 1. What is the gauge of the wire, this ad says 11 age, but some other sites with the exact cable says it is 14 awg, which is very thin for speaker runs. What is the truth?

A: Effective AWG of combined twin conductors: 11 AWG Per Canare: Recommended for long runs and low end Power Amplifier sub-woofer systems. Heavy duty 4 x 14 AWG conductors. ● PA Systems. ● Hi-Fi Speakers. ● DC Power Lines. ● Super Flexibility, even in Sub-Zero Weather. ● Star Quad Design Reduces EMI Noise. ● Low Capacitance and Resistance.

Q: 2. What is the difference between this cable and Canare EC005F (BH #CAEC005F)?

A: The Canare Star Quad L-4E6S Microphone Cable is made with 24 AWG wire and the Canare EC005F Star Quad Microphone Audio Cord is made with 21 AWG wire.

Q: 3. Are the cables for both speakers included, or is it just for one speaker?

A: It's a single 2 Banana to 4 bi wire cable.

Q: 4. Will this fully work with the balanced input from the signal of a Sennheiser 500 series?

A: The Cable Techniques CT-S2KLPOP-24 3.5mm TRS to Low-Profile XLRM Cable is intended for use as a receiver output cable, not as a transmitter input cable, since an XLR output connection is typically male and requires a cable with an XLR female connector. If that is the case, then you will want to use the Cable Techniques Mini TRS to XLR Female Low-Profile Sennheiser Line Input Cable - 18" (B&H # CAMINLPXIN18).

Q: 5. Will this cable work with Sennheiser EW 100 G2 Receiver?

A: This cable will work with Sennheiser EW 100 G2 receiver, as well as receivers in the G3, and G4 EW series.

Q: 6. Is the copper made of solid oxygen-free copper as opposed to copper clad aluminum (CCA) or copper clad steel (CCS)? And are the banana plugs locking?

A: It is Oxygen Free Copper, not clad, and they do have locking plugs.

Q: 7. this work with BH #NENE8FDXP6 ?

A: Yes, the etherCON Cat 6a Male Cable Connector is compatible with the Neutrik NE8FDX-P6 D-Shape Cat 6a Shielded Feedthrough Panel Connector.

Q: 8. Is this connector compatible with Clear-Com?

A: Unfortunately no. This item BH #NENC6FXB is not compatible with anything. If what you are using outputs 6-pins then this connector would need to be soldered to the intended wire that same configuration. It will not just plug into an existing unit.

Q: 9. For the 4 wire portion of the cable. Which two are for high frequency and which are for low? No designation.

A: The Canare 4S11 Bi-Wire Speaker Cable - 2-Banana to 4-Banana (Black, 20') BH #CA4S112B4B20 is made for Bi-Wiring and end with 4 plugs would just be 2 negative and 2 positive.

Q: 10. B&H has Neutrik NC7FXB described as a 7-pole 3-pin connector. The photo shows a 3-pin connector. Is that correct? Or is it 7 pins?

A: That is correct, this is a 3-Pin Female XLR Connector. It has 7 contact points inside it, which is what 7-pole means.