The white B6 Omnidirectional Lavalier Microphone, Standard Sensitivity, with Hardwired 3.5mm Locking Connector for Azden Wireless Transmitters from Countryman is a very small lav microphone measuring one tenth of an inch in diameter. It can be used to capture audio for theater, broadcast, house of worship, and general lavalier applications.

This version offers the highest gain for general speaking such as in presentations or sermons. Built with a low handling noise and rugged construction, the B6 lavalier microphone can be easily hidden in a performer's hair or on costumes, ties, or behind a shirt button. It can also be attached to eyeglasses, for a secure, discreet, and convenient alternative to hair miking. The ultrathin diaphragm deliver a natural sound while its tiny size makes the B6 easy to position for ambient noise and feedback rejection. The B6's aramid-reinforced cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

Additionally, the included swappable protective caps let you shape the frequency response for different situations or to match other microphones. The B6 is resistant to makeup, sweat, and moisture when used with a protective cap, which can be quickly removed for cleaning or replacement.

For Theater, Live Stage & Studio Use    Hardwired Connector    Fits Azden Transmitters    3.5mm Locking (ZV), See Description    20 Hz to 20 kHz Frequency Response    Includes 3 Capsule Protection Grids    Headroom for Most Uses    Includes Windscreen & Cable Clips    Includes Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B6 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B6 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B6 provides high-quality audio with low distortion at SPL up to 140 dB on 48V phantom power. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B6 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high overload capability for recording instruments.

Standard, for most uses.

Related Questions and Answers

Q: 1. Good afternoonI have an old Sony-urx-p1-utx-b1 kit, but has lost my lavalier.Does this Azden lavalier work on my kit?RegardsJonny PedersenThe Steadicam Operaotr

A: It is very unlikely the Azden EX-503 will work with your UTX-B1. The connector on the Sony transmitter is a locking 3.5mm screw connector. The Azden is not, also the wiring may be different. The lav normally used as a replacement would be the Sony ECM-77BMP.

Q: 2. will it work with a zoom?

A: The EX-503 will be compatible with devices that have a 3.5mm mic input jack and are able to supply plug in power to the mic. This includes the Zoom H1, H2 and H4N recorders.

Q: 3. How is this powered? No battery?

A: whatever you stick it into; powers it.

Q: 4. Is ex503h mic compatible with sony WRT820A?

A: I am afraid not. The Azden employs a 4-pin mini Hirose Your bodypack uses SONY's proprietary SMC9-4P connector. The pin-assignment may be different:Pin 1: +5 voltsPin 2: HotPin 3: ColdPin 4: Ground

Q: 5. I may have missed it, but I can't seem to find the length of the wire - how long is the wire? Bonus question - what would be a good extension if I needed to extend the wire?

A: The cable length is about 4 feet. I don't have a specific extension to recommend, but you'll want to look for a mono audio cable that is 3.5mm TS female to 3.5mm TS male.

Q: 6. Can this be plugged into a Sennheiser transmitter? The Sennheiser has a three contact 1/8inch connector, this has only two contacts. Anyone do this already? Thanks!

A: I can't really comment on Sennheiser's equipment, however, if the transmitter has a 3 contact mini-jack, it could be for a balanced connection. If this is the case, it is possible that the 2 contact plug on the EX-503L would work, it just would not be balanced.

Q: 7. I see this is the 503L - what is the difference from the 503?

A: Pretty sure the 503L screws down onto the transmitter so it won't come unplugged, the 503 just plugs in but doesn't lock down.

Q: 8. Is this compatible with the SONY WRT-820A?

A: This microphone is not compatible with any Sony systems. Your Sony wireless system requires a mic with the SMC9-4P connector, such as the Sony ECM-44BC Omni-Directional Lavalier Condenser Microphone with 4-Pin Connector,B&H # SOECM44BC.

Q: 9. Will these mics work with Canon Vixia camcorders? What is the best wired mic for use with these canon vixia camcorders?

A: Canon Vixia camcorders are not able to supply power to mics that require it such as the Azden EX-503. You will need to use a mic that is able to supply its own power which is generally by a battery. The Polsen OLM-10 is one example which features a small battery inline.

Q: 10. How long is the cord?

A: The EX503L features a 1.3 meter cable (4.26 feet).