Plug two microphones with TA4F connectors into a single TA4M connector with the YSH from Point Source Audio. This adapter cable is designed for use with two Point Source microphones with TA4F connectors and is wired for compatibility with Shure wireless microphone transmitters.

Combines Two Microphones for One Input    Plug Two TA4F Mics into One TA4M Input    For Shure Transmitters with TA4M

Related Questions and Answers

Q: 1. If I reversed the signal flow, would this work as a line level Stereo RCA Splitter?

A: The only way you could reverse the signal flow on the Galaxy JIB/R is if you opened it and soldered it to reverse the inputs and outputs to be able to achieve what you are describing. If you require a splitter then you would need something more like B&H # GAJIBS or BH #HEPB2.

Q: 2. Will the MKH416 fit in this case securely?

A: Yes, a Sennheiser MKH 416 shotgun microphone will fit securely into the K-Tek KSTMC1 Stingray Microphone Case for Two Shotgun Microphones.

Q: 3. Please advise the item have stock available now?We looking for 8 pcs.

A: Please email us at sales@a href= http://bhphoto.com target= _blank bhphoto.com/a for assistance with your inquiry.

Q: 4. Can I blend the audio in one of the Input selections (let's day Position 2) from two Audio sources connected to two separate Inputs (let's say Position 1 and 3) without producing a ground loop or unwanted noise/hum?

A: No, only one input source can be selected at a time. It is not possible to combine multiple input sources. Perhaps the Rolls MX28 Mini-Mix VI Compact Stereo Line Mixer (B&H # ROMX28) may be more along the line of what you need. Please contact us by phone or through live chat on the website if you would like further assistance to find the best option for your application.

Q: 5. Is the LED red only? Does the light on indicate that the mic is muted, or that the mic is on?

A: Yes, the LED status indicator light on the Audio-Technica AT8699R Microphone Desk Stand is red. The LED illuminates to indicate when the switch for the microphone (sold separately) is active so when the mic is on the LED is red. The switch can be set to any of its three operating modes which are "touch-on/touch-off," "touch-to-talk," and "touch-to-mute."

Q: 6. I do high school basketball play by play with an Irigpro. Can this ART SPLITCOM Pro be used to add another Mic for a second announcer doing commentary during pauses in my play by play while still running both mics through the iRigPro?? What does this do to the sound quality? We use the MIXLR app to do all our basketball games. Thanks, Jay

A: The ART SPLITCom Pro Microphone Splitter/Combiner can be used as desired to combine two microphones into one output signal. It will not allow for individual level control of each microphone however. For a solution that does allow level control, a small mixer such as BH #ARUSBMIX4 would be suitable.

Q: 7. Can I use this cable to connect a Rode Wireless Go II mic to an android phone? Can it be used with the dual channels or just one

A: Yes, the Deity Microphones C21 3.5mm TRS to USB-C Coiled Audio Cable can be used to connect the Rode Wireless Go II, however, it can only connect 1 channel, so in order to use both mics, you will need to run the Wireless Go in Mono Mode.

Q: 8. Can the mixer be used with a tentacle sync device?

A: It depends on what type of device you will be using the Kopul CMCS-1 Passive 3.5mm Microphone Combiner/Splitter with and whether or not it accepts timecode.

Q: 9. There is another version of ART Spliter: ART ProSplit with one input and two outputs. Does ART SPLITCom do whatever ART ProSplit do? ART ProSplit costs more than ART SPLITCom, though.

A: The units I bought are can be used either as a splitter (two outputs for one input) or a combiner (two inputs merged into one output).

Q: 10. Can the mixer be used with a tentacle sync device? I will be pairing with a Panasonic S5 and Sennheiser MKE 400 Shotgun Mic

A: Yes, you can use the Kopul CMCS-1 Passive 3.5mm Microphone Combiner/Splitter to connect the Sennheiser MKE 400 Shotgun Microphone and a Tentacle Sync timecode generator to the Panasonic Lumix S5 Mirrorless Camera.