The cocoa B2D Directional Lavalier Mic, Medium Gain, with Hardwired LEMO 3-Pin Connector Cable for WisyCom Wireless Transmitters from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the B2D lavalier is equipped with a hardwired cable that terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

Hypercardioid Pattern    Fits WisyCom Transmitters    Headroom for Loud Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Medium (red band, -10 dB re W4) for Loud vocals

Related Questions and Answers

Q: 1. Will this fit a sanken cos11 b

A: Yes. The mic clips included in the Auray Lavalier Deluxe Accessory Kit (Medium) are compatible for use with the Sanken COS-11D, and the foam and furry windscreen should fit when placed over the mic's mesh windscreen.

Q: 2. Does the receiver accept a line level input?

A: The receiver included with the Samson Go Mic Mobile Digital Wireless System can send a line level output signal when the output selector switch is set for headphones. The audio from the transmitter is sent wirelessly to the receiver so there is no physical input connection on the receiver. The transmitter is designed for mic level input.

Q: 3. Is this compatible with the Sennheiser EW 100 ENG G4?

A: Yes, this is compatible with the EW100 system transmitters.

Q: 4. will this work with samson qe fitness headset?

A: Hello, Thank you for contacting Samson Technologies. The QE headset will connect into this belt pack along with any of our other headset/ear set microphones with a P3 connection. If you have any other questions or inquiries, please let me know at any time. Best Regards, James

Q: 5. Will I need an adapter to use this mic with my canon 7d mark ii camera? If so which one please? Thank you

A: Yes you will need an adapter : Rode MiCon 1 Connector for Rode MiCon Microphones (Sennheiser)

Q: 6. Does this clip work with the sony ECM V1BMP? I have the older model sony uwp V1 lav system.

A: No the clip from this kit does not fit the ECM V1BMP

Q: 7. I currently own the Samson Go Mic Mobile system with the Q8 handheld mic. Can I use two of the LM8 Lavalier packs with the receiver that I already have? Or do I need to purchase the Dual Channel Lav System?

A: The Samson Go Mic Mobile reciever will allow for two transmitters, so you can add this body pack and lav to your system in additon to the Q8 handheld transmitter for a two channel system.

Q: 8. How can I wire this instead of using it wirelessly? I know this thing needs power and it won't work when I plug it into a camera with an adapter.

A: You can use the Rode MiCon 2 Connector for Rode MiCon Microphones (B&H # ROMICON2 / MFR # MICON-2) which will allow you to connect the Rode lavalier mic directly to a 3.5mm TRS mic input on a DSLR or mirrorless camera or a portable recorder and use plug-in power supplied by the input of the camera or recorder.

Q: 9. Can it work with 2 handheld mic?Can it work with 2 handheld and 2 lavalier mic?

A: The Samson Go Mic Mobile allows for six total transmitters (handheld beltpack lav/headset)to be used across three complete systems.

Q: 10. Will this work with a laptop? Need the adapter MICON-2? Does a laptop have the 1v power on its mic input?

A: The Rode Lavalier requires 2 to 5V of plug-in power for operation. It would be best to use a USB audio interface that has a dedicated mic input with a preamp. The interface can supply the proper amount of power for optimum performance and control of the mic. For the MiCon adapter, use the Rode MiCon 5 Connector for Rode MiCon Microphones - XLR (B&H # ROMICON5) which provides an XLR connector and allows the mic to connect to a standard XLR input. For a very basic interface, you can the Polsen XLR-USB-48 XLR to USB Audio Interface (B&H # POXLRUSB48) which is compatible with Mac and Windows, and no drivers are required. It also features a headphone jack with level control for monitoring and the USB cable is included. Please feel free to contact us by phone or through live chat for further assistance and we can help you to find the best options for your application.