Tiffen's 4 x 5.65" Combination Glimmerglass 1/2 / Polarizer / IRND 0.6 Filter is a four-in-one combination filter. This filter provides color and contrast enhancement and removes unwanted glare from reflections while adding a subtle glow of Glimmerglass diffusion effect. The combination provides cinematographers with sensitive controlled filtration in exterior environments.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

0.6 Optical Density    ColorCore Technology

4 filters-in-one reducing multiple surfaces and potential reflection from stacked filters

Removes unwanted reflections and is ideal for shooting in hot/warm environments

Saturates colors providing better contrast without affecting the overall color balance

Eliminates ultraviolet rays to remove haze from outdoor shots

Maintains the distinct subtle effect of Glimmerglass

Designed for digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution in the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight 2 stage and clip-on matte boxes with rotating stage

Made from water white glass

Related Questions and Answers

Q: 1. How many stops would I need to do a long exposure of the direct sunset with a bright reflection off a river? I already have a 3, 6, and 10 and I can't get a past 2 second shutter speed with the 10 stop. Should I stack them or buy the 15 or 20 stop?

A: It is always better to use as few filters in front of the lens as possible so one 20 stop filter would be a better choice.

Q: 2. Hi, will this fit in my Nisi 100x100 mm V5 Pro filter holder

A: This filter is meant for video and fits in their C4 video filter holder. You can click the link below to view the item on our website; https://bhpho.to/2ow4C7r

Q: 3. Which side should be facing away from the camera? I realize this sounds like a silly question, but since these filters appear to have identical coating on both sides, I'm curious if it should make a difference? Should I assume that the side with the engraved writing be facing AWAY from the camera? I just received 3 of these (3, 5, and 7 stop filters) and a bit dumbfounded! BTW, the quality looks fantastic, along with the packaging.

A: Since both sides have identical coating, it doesn't matter which way the filter is facing. We've taken them out on several shoots without noticing a difference either way.

Q: 4. Does this fits Tilta 4 x 5.65" Stackable Filter Tray Holder (BH #TIMBT16SFH)?

A: According to Tilta, the Mirage-system supports 2mm and 4mm filters like this Nano IRND 2.1 filter. The issue with your question, however, is that the stackable filter tray holder is not the device you need to hold the filter. You need TIMBT16SFT (stackable filter tray) AND TIMBT16SFH (stackable filter tray HOLDER) to work with the Mirage matte box.

Q: 5. Does this filter fit on Lee filter holder ?

A: Yes.

Q: 6. Are theses filter can be hold with the nisi 100mm holder v5 ?

A: Sorry shopper, these Cinema filters will not fit into the V5 Holder.

Q: 7. does this filter thickness fit into the 4x5.65 filter slots from this mattebox? BH #TIMBT12M114 MFR #MB-T12-M114

A: The Tilta 3-Stage 4 x 5.65" Carbon Fiber Clip-On Matte Box (114mm Back) is a cinema matte box and takes cinema 4mm thick filters. The NiSi 4 x 5.65" Nano IRND 0.3 Filter (1-Stop) is 4mm thick. It will fit.

Q: 8. will this fit in to a LEE 100 system?

A: Yes. Lee systems adapts to all 4x4, 4x6 and all 100mm filters

Q: 9. What is the difference between this and the Nisi 4x4? (I read one is 2mm and the other is 4mm) what difference does that make?

A: 2mm filters are primarily used in slide-in filter holders, whereas 4mm filters would not fit them and are primarily used in matte boxes.

Q: 10. Does this have the scratch resistant coating which was demonstrated at NAB 2016?

A: Scott, these particular NiSi filters do have a scratch resistant coating, BUT, it is not the same as what was demonstrated during NAB 2016. NiSi has a new line of filters with a very strong scratch-resistant coating coming out later this year. That is what was being demonstrated at NAB 2016.