Escape Hybrid Lithium Ion Battery Output

Jupio Proline 14.4v 95wh Lithium-ion Battery (v-mount)

Product Code: ga81989
Availability: In Stock

$926.85 $1,362.47

Qty

0 reviews Write a review

Description
Reviews (0)

The Jupio ProLine 14.4V 95Wh Lithium-Ion Battery, in a V-mount, supports a continuous draw of 14.8A and offers a D-Tap output for accessories and USB output for charging mobile devices on set. The battery features an ergonomic design with finger grips and has an LED battery level indicator that turns on at the press of a button. It's also designed with overdischarge, overcharge, and overcurrent circuit protection.

14.8A Continuous Draw; 20.8A Peak D-Tap Output / 5V, 2.1A USB Output LED Level Indicator with Power-On Button Ergonomic Design with Finger Grips

Parameters
Mount / Series Type	V-Mount
Chemistry	Lithium-Ion
Battery Capacity	6600 mAh / 95 Wh
Output Voltage	14.4 VDC
Maximum Load	14.8 A 20.8 A (Peak)
Accessory I/O	1x D-Tap / P-Tap Output 1x USB-A Output
USB Output	5 V, 2.1 A
Operating Temperature	-4 to 122°F / -20 to 50°C
Storage Temperature	-4 to 140°F / -20 to 60°C
Dimensions (W x H x D)	3.78 x 1.49 x 5.91" / 9.6 x 3.78 x 15.01 cm
Weight	1.29 lb / 0.59 kg
Packaging Info
Package Weight	1.53 lb
Box Dimensions (LxWxH)	7.6 x 4.8 x 3.6"

14.4 VDC nominal / 16.8 VDC maximum voltage
14.8A continuous draw; 20.8A peak
D-Tap output
5V, 2.1A USB output
LED battery level indicator with power-on button
Ergonomic design with finger grips
Overdischarge, overcharge, and overcurrent circuit protection

Related Questions and Answers

Q: 1. How long does it take for a full charge?

A: You will need to find the charge rate current from a specific charger to find the time. Typically, block battery chargers have a 2.5 to 3 Amp charge rate current. So a 150Wh battery will take around 3 to 4 hours to fully charge.

Q: 2. Is it compatible with Nikon MH-33 Battery Charger? Thank you.

A: Yes, the Jupio ProLine EN-EL18d Lithium-Ion Battery is compatible with teh Nikon MH-33 charger.

Q: 3. Watson Pro Single-Position Li-Ion Battery Charger?

A: Yes, You can use the Watson Dtap charger to charge the Juicebox 95Wh Lithium-Ion Battery. Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output BH #WACSPT

Q: 4. Where is the battery made?

A: Country of origin of Jupio ProLine EN-EL18d Lithium-Ion Battery (3500mAh) is China.

Q: 5. How many Amps does it out put?

A: This battery puts out approximately 8 Amps (based on the formula: Amps = Watts / Volts). // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.

Q: 6. How long will it power a CINEGEARS Ghost-Eye Wireless HDMI & SDI Video Receiver?

A: The Juicebox Lithium-Ion Battery with D-Tap Charger (95Wh, V-Mount) (B&H# JUJBVB95) could indeed be used to power V-mount battery plate equipped CINEGEARS wireless SDI and HDMI receivers. While there are several different such CINEGEARS models, they typically use about 10W of power and so could be expected to run for up to about nine hours on this battery. However, battery-powered run times will vary by model, settings, and conditions of use.

Q: 7. Will it work with Nikon D500 and D850 camera?

A: Jupio ProLine EN-EL18d Lithium-Ion Battery (3500mAh) was only tested on Nikon Z9, D4, D4s, D5, D6 so your results may vary.

Q: 8. Can this be charged with a Core X2 charger?

A: Yes, you can charge a Juicebox Lithium-Ion Battery with a Core X2 Charger. This is not recommended since CoreSWX chargers and batteries use a specific chip that is most efficient with their ecosystem.

Q: 9. Can this power a blackmagic 6k? if so, how may hours could i get when shooting?

A: Rough estimate of 6 hours.

Q: 10. The USB port doesn't seem to charge iPhones, any idea of what I'm doing wrong

A: You have to hold the battery check button on the side for two or three seconds. That turns on the usb port.

There are no reviews for this product.