This 6.6 x 6.6" Tiffen Combination Soft FX 1/2 / IRND Filter is an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

1.2 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. 4mm glass is for Nisi V5 system?

A: Nisi V5 uses 100x100mm by 2mm thick filters.

Q: 2. Which side should be facing away from the camera? I realize this sounds like a silly question, but since these filters appear to have identical coating on both sides, I'm curious if it should make a difference? Should I assume that the side with the engraved writing be facing AWAY from the camera? I just received 3 of these (3, 5, and 7 stop filters) and a bit dumbfounded! BTW, the quality looks fantastic, along with the packaging.

A: Since both sides have identical coating, it doesn't matter which way the filter is facing. We've taken them out on several shoots without noticing a difference either way.

Q: 3. is there a particular reason Nisi makes this density in 100x100mm and not 4x4? I need 8 stop ND to complement my Nisi IRND set

A: You can use 100x100 filters. 100x100 is the same as a 4x4 filter.

Q: 4. Does this filter fit on Lee filter holder ?

A: Yes.

Q: 5. Hi, will this fit in my Nisi 100x100 mm V5 Pro filter holder

A: This filter is meant for video and fits in their C4 video filter holder. You can click the link below to view the item on our website; https://bhpho.to/2ow4C7r

Q: 6. How we can get these products in Nepal? Regarding diameter of lens it's 77mm which one ND will fit on it?

A: Please enter your shipping address for duties and taxes. You can use ND filters that have a 77mm filter thread.

Q: 7. I have the V5 set. If these have the gasket pre-installed, can they be stacked or used in the outer slots with one in the nearest slot?

A: You cannot stack more than 1 filter in each slot.

Q: 8. Do I need holder as well and I used 24-120 and 20mm most if time which one will be fit?

A: You will need a filter holder and step-up or step-down rings depending on your lens filter thread size.

Q: 9. will this fit the tilta mini matte box?

A: Yes the NiSi 4 x 5.65" Nano IRND 0.3 Filter (1-Stop) BH #NIRND034X565 • MFR #NIC-4565-ND0.3 will fit the Tiltaing Mini Matte Box BH #TIMBT15 • MFR #MB-T15.

Q: 10. Does this fits Tilta 4 x 5.65" Stackable Filter Tray Holder (BH #TIMBT16SFH)?

A: According to Tilta, the Mirage-system supports 2mm and 4mm filters like this Nano IRND 2.1 filter. The issue with your question, however, is that the stackable filter tray holder is not the device you need to hold the filter. You need TIMBT16SFT (stackable filter tray) AND TIMBT16SFH (stackable filter tray HOLDER) to work with the Mirage matte box.