The black I2 Bass and Cello Microphone Kit with 3-Pin XLR Connector for Lectrosonics UH100, UH110, UH190, UH195, UH200, and UH200c Wireless Transmitters from Countryman is a mic that has been built from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. It can be used to capture natural audio for this instrument.

The I2 microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and captures detail for quieter instruments. Flexible close miking techniques are aided by the bass and cello mount, which sits securely behind the bridge with a positioning arm for placement. In addition, the 5' cable is hardwired to the mic and terminates with a 3-Pin XLR connector for direct connection to Lectrosonics UH100, UH110, UH190, UH195, UH200, and UH200c wireless bodypack transmitters.

Omnidirectional Polar Pattern    For Instruments and Sound Reinforcement    Hardwired Connector    Natural On & Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques are aided by the instrument mounts, which position securely and gently on the instrument for capturing audio.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning and consistent patterns.

The omnidirectional polar pattern picks up sound from all directions equally offering the flattest frequency response, lowest noise level, and is least susceptible to wind noise and vibration. It is recommended for recording and sound reinforcement of acoustic instruments such as percussion, guitar, saxophone, and piano.

Related Questions and Answers

Q: 1. what is the smqv connector? is TA3M? or TA5M?

A: The connector is a TA5.

Q: 2. Can this be used with a conventional analog audio mixer. Phoenix connector to three inputs on the mixer?

A: Unfortunately it cannot. It comes with an RJ45 output and includes an RJ45 to XLR male adapter for connection to ClearOne INTERACT AT mixers.

Q: 3. How long can this mic stay in standby mode if using a lithium battery?

A: I'm not sure about standby mode but I've gotten 3.5-4 hours out of use out of the thing. I always use lithium batteries. Energizer makes two different ones though: Advanced which they say lasts up to 6 times longer and Ultimate which they say lasts up to 9 times longer. Great mic!

Q: 4. What is the difference between the Lark C1 and M1?

A: The Lark C1 outputs USB-C. The Lark M1 outputs TRS or TRRS for compatibility with the mic input on a camera or camcorder, or the headset input on a smartphone or tablet.

Q: 5. could this mic be used to amplify wood vibrations such as drums or even a piece of wood?

A: This would be an excellent mic for your application

Q: 6. What is the power output rating in watts for this Bose soundbar?

A: The Bose TV Speaker Soundbar is 100W RMS.

Q: 7. what is the matching reciever?

A: The Lectrosonics SMQV Super Miniature Wireless Microphone Transmitter is compatible with any Lectrosonics Digital Hybrid receiver in the correct frequency block, such as BH #LEUCR411A21.

Q: 8. As i am using my 32" TV as a computer monitor. Would this Bose sound bar be still suitable as a nearfield speaker. ? ( to be place around 2 ft from my seat). Thanks for answer

A: Yes, it should work just fine it if you're using HDMI from your PC.

Q: 9. can you use a usb c to lightning adapter to connect it to an iPhone?

A: No, the Hollyland LARK C1 DUO 2-Person Wireless Microphone System with USB-C Connector for Mobile Devices is not compatible for use with an iPhone and will not work with an adapter to convert the USB-C plug to Lightning.

Q: 10. When using the 3.5mm Analog out to record directly into the camera is it using the Tascam's HDDA Preamp or the cameras preamp?

A: If you have a microphone connected to one of the XLR inputs on the TASCAM CA-XLR2d-F XLR Microphone Adapter Kit, and the 3.5mm output of the TASCAM CA-XLR2d-F XLR Microphone Adapter Kit is going into the 3.5mm mic input on your camera, it would mean that both the HDDA preamp and the preamp inside of the camera are being used.