The MTT605B Carbon Fiber Video Tripod Kit from miliboo features a carbon fiber tripod, compact fluid head, and ground spreader, and it includes a carry case to pack all these into, providing a complete solution for up to 17.6 lb loads, which is the payload of the fluid head. The tripod has a 75mm bowl base, and the fluid head has a flat base and comes with a 75mm half ball adapter that lets you attach it to the tripod.

The flat base of the fluid head has a 3/8"-16 mounting thread on the bottom. A benefit of the flat base is that it allows you to attach the head directly to sliders and other camera supports that have a 3/8"-16 mounting screw or a 3/8"-16 adapter. With this capability, you can easily move the head along with your camera between the tripod and these various other supports. A quick release plate included with the head offers both 1/4"-20 and 3/8"-16 camera mounting screws along with a locating pin. The head also comes with a pan bar and has an integrated bubble level for checking balance.

The carbon fiber design of the tripod makes it lighter and also corrosion-resistant. The included ground spreader, which allows for increased stability, is removable from the tripod. When it's removed, the tripod's spiked feet can be used on soft ground. A key feature of the tripod is a simple single-flip leg locking system on each of the legs, allowing you to efficiently adjust the height of each leg. The tripod is height-adjustable from approximately 20 to 67" in two stages/three sections. The head adds several more inches on top of this, allowing you to shoot from high angles.

75mm Bowl Tripod with Single Flip Locks    20 to 67" 2-Stage Height Adjustment    Flat Base Fluid Head, 17.6 lb Payload    Removable Ground Spreader    1/4"-20 and 3/8"-16 Screws, Locating Pin    Dual Rosette Mounts, Pan Bar Included    Bubble Level

Carbon fiber 75mm bowl base tripod with single-flip leg locking system; approximately 20 to 67" height adjustment in two stages

Compact fluid head with a 3/8"-16 flat base and 75mm half ball adapter; 17.6 lb payload

Quick release plate with 1/4"-20 and 3/8"-16 screws and locating pin

Removable ground spreader

Carry case

Rosette-mount pan bar included; two rosette mounts provided

Bubble level

Related Questions and Answers

Q: 1. I've got a Cartoni Focus 12 100mm fluid head - is this compatible with this tripod?

A: Yes, the Vinten flowtech 100 has a 100mm bowl and is compatible with 100mm ball heads.

Q: 2. Do these tripod legs ( MTT701AWH ) come with a carry case ?

A: No, the miliboo MTT701AWH legs do not come with a carry case.

Q: 3. It can support up to 44lbs, but are their any 75mm heads that support more than 20lbs?

A: The Miller 1036 is a 75mm Head with a 26.46 pound load capacity, B&H # MI1036. We also have the Libec RH45D which has a 26.5 lb capacity, B&H # LIRH45D.https://bhpho.to/2yO7Ffjhttps://bhpho.to/2hqIeZt

Q: 4. is there another spreader I could use with this tripod to go lower, other than the one included?

A: There is a floor spreader model as well as this mid-level one seen here. Acebil T1002G Tripod Legs (100mm Bowl) B&H # ACT1002G. However, to get as low as possible with this tripod, you would have to remove whatever spreader it has. The lowest possible set up would come with a smaller tripod or a hi-hat. E-Image Hi-Hat with 75/100mm Bowl B&H # EI7500 is one possibility.

Q: 5. What warranty is offered with this tripod?

A: This tripod has a Limited 1-Year Manufacturer's Warranty that is extendable to 2-Years once you register the product with Sachtler.

Q: 6. Will this tripod work with the Sachtler Ace fluid head, that I think is 75mm also?

A: Yes, and they're currently selling it as a bundle for 11% off.

Q: 7. Min height is 25" or 17"? It says both. Then again for some reason the Carbon version says its 17" too.

A: The height range of this tripod is 25.2 to 58.3 inches.

Q: 8. Can the flowtech 75 be adapted to fit a 100mm head? If so which adapter works best?

A: The Sachtler flowtech 75 legs will only accept 75mm bowls. For compatibility for both 75mm and 100mm bowl tripod heads the Sachtler flowtech 100 MS Carbon Fiber Tripod (SKU: SA5585) would support 100mm bowls as well as a 100mm to 75mm adapter such as the Sachtler SA3906 to support 75mm bowl heads. https://www.bhphotovideo.com/c/product/1431234-REG/sachtler_5585_flowtech_100_ms_carbon.html/accessories https://www.bhphotovideo.com/c/product/78905-REG/Sachtler_3906_Adapter_75_100_75mm_Ball.html?sts=pi&pim=Y

Q: 9. Does it come with a handle?

A: yes, it does

Q: 10. If not using full height, would it extend the thicker sections first before the thinner ones?

A: Yes, that will be possible if not using it at full height.