The 8Sinn 15mm Baseplate is ARRI dovetail compatible and supports optional camera-specific riser plates from 8Sinn. Available plates include the Riser Plate Basic, which supports the URSA Mini, C100, and Sony FX-9 cameras, and the Riser Plate I, which is for select 8Sinn Z CAM, a7/a7R, and Blackmagic Pocket 4K/6K cages. These optional plates set the supported cameras at the appropriate optical center on the 15mm Baseplate.

The 15mm Baseplate features 15mm LWS rod support via front and rear rod ports and a tightening lever on the left and right sides. The left side has a second lever, and this is for securing the compatible riser plate. The 15mm Baseplate offers two ARRI rosette mounts for attaching optional handgrips, and it also provides a section with multiple 1/4"-20 accessory mounting threads. The baseplate is made with excess weight cut out to provide a minimalist, lightweight design.

15mm LWS Baseplate + Riser Plate I    Shoulder Support    2 x Shoulder Rig Arms with Dual Grips    Lightweight Aluminum Design

• Supports optional camera-specific riser plates from 8Sinn

• Compatible with the Riser Plate I and Riser Plate Basic

• ARRI dovetail compatible

• 15mm LWS rod support

• ARRI rosette mounts

• 1/4"-20 accessory mounting threads

Related Questions and Answers

Q: 1. Could I mount the Core SWX powerbase edge battery underneath the baseplate?

A: yes you can it will mount the same way a standard quick release plate would

Q: 2. Is this baseplate compatible with the Canon c500 mk ii ?

A: As the Tilta Universal 15mm LWS Baseplate (Black) is a universal baseplate, it can be used with the Canon EOS C500 Mark II 5.9K Full-Frame Camera Body (EF Mount); however your lens to rod height may not be of a standard height due to the universal nature of the baseplate.

Q: 3. Is this unit legal in CA?

A: Yes, the 8Sinn Shoulder Rig Kiti with 15mm LWS Baseplate is legal in California.

Q: 4. Can the manfrotto 502ah quick release plate be mounted to the bottom of this baseplate?

A: There are several 1/4"-20 screw holes on the bottom of the baseplate so yes, you would be able to mount that Manfrotto quick release plate to the bottom of it.

Q: 5. Will this fit the Tilta S1H cage? The LWS plate for my GH5 Tilta cage does not center the S1H lens over the 15mm rods. I want to use the S1H w/Tilta cage and a matte box.

A: The Tilta 15mm LWS Baseplate Type I (Black) (B&H# TIABSP15B) is not designed for use with the Tilta Full Camera Cage for Panasonic S1/S1R/S1H Series (Black) (B&H# TIAT38FCCB) and it will not fit properly. Rather, use the Tiltaing 15mm LWS Baseplate Type II (Black) (B&H# TIABSP215B).

Q: 6. What is the maximum payload of this system?

A: The CAMVATE does not supply payload weight info for the Single-Grip Shoulder Rig with Manfrotto-Type Quick Release. We would recommend using the shoulder mount with payload weights of less than 14lbs.

Q: 7. Does this come with two 15mm rods?

A: It does not include 15mm rods.

Q: 8. Will this work with the Smallrig Fx3 Half cage?

A: The Tilta 15mm LWS Baseplate Type I (Black) would only be compatible with Tilta cages.

Q: 9. Will this work with the Sony FX3 also? Considering rod height for a matte box, etc? Other manufactures have baseplates listing both Komodo and FX3, so I'd hoping this works.

A: No. the following unit is designed and made for the red komodo Camera only.

Q: 10. Does this base plate provide standard rod height from optical center on the BMPCC6k?

A: Yes, this is designed specifically for use with the Tiltaing BMPCC 4K/6K cage and will align the camera as shown in this photo on our website. https://bit.ly/33N5zGZ