This 42 RU Adjustable Depth Server Rack Cabinet with Casters from StarTech provides security for storing standard 19" rack-mount equipment. The rack is compatible with EIA-310 compliant equipment and supports a weight capacity of 3307.5 lb when stationary and 2315.2 lb when rolling. The mounting rails can be adjusted from 5.2 to 35" to support full-depth equipment installations and the extra width and depth provide space for additional cable and power management.

Powder-Coated Black Cold-Rolled Steel

• Full Sized Secure Rack: 19" four post 42 RU server rack cabinet with adjustable depth of up to 35", internal depth 41.4", dual panel doors make equipment easily accessible, and includes locking doors/sides with 2 included keys.
• Fully Assembled with Casters: Pre-built with casters and levelling feet to offer maneuverability and stability; 200 cage nuts/screws and hook-and-loop tape provided so that equipment can easily be mounted.
• Design and Ventilation: Free-standing data cabinet with strong mesh doors and vented top allow for abundant airflow, and the top is also removable to run cables. 1 RU intervals are marked for easy identification.
• Compatibility: EIA/ECA-310-E compliant for server/networking equipment, including brands like HPE ProLiant, Dell PowerEdge, and Lenovo ThinkSystem. Split rear doors reduce rear access space requirements.

• This rack has been engineered with different features that enable you to easily incorporate plenty of equipment.
• With adjustable mounting rails you can easily change the rail depth to up to 32.7". These rails ensure the cabinet is widely compatible with your standard rack-mountable equipment. The added depth also provides support for additional cable and power management behind your equipment.
• The rack features brushed ports on the ceiling and floor panels that enable you to easily run cabling to the inside and outside of the cabinet, for discreet cable management. The floor and ceiling panels can also be removed enabling you to customize your setup, and the rack features grounding lugs that enable you to ground your equipment for added protection.

• To ensure you have full visibility of your equipment while securely locking it up, this rack has a stylish glass window on the front door. The glass door looks great in any server room and gives you the freedom to clearly monitor equipment without the hassle of opening your rack.
• The rack also has removable side panels with independent locks with quick-release mechanisms that enable you to easily access your equipment while still keeping it secure.

• The cabinet features casters for hassle-free access to rear-mounted equipment while providing ease of mobility around your office, studio or server room. Plus, the width and height of the rack fit through standard doorways, giving you the freedom to wheel your server rack into different rooms.

• The rear door on the rack is mesh, and the front glass door is vented, working together to increase airflow to provide passive cooling that's cost effective and ensures your equipment runs at an optimal temperature.

Related Questions and Answers

Q: 1. Is the overall height of 20” with or without the casters?

A: That is the overall height with the casters.

Q: 2. Is this rack compatible with the "Atlas Sound 1" Deep Plexiglass Door for WMA 12-Rack Unit?"

A: thank you for your question. This will not be compatible with the glass door.

Q: 3. Some of the pictures show these racks with the sides pieces off and some on. The plastic side panels appear to be sitting in a groove, what's the best way to remove the side panels without damaging them?

A: The side panels on the SKB iSeries Injection-Molded Fly Rack - 6 RU, 13" Rack Depth (B&H # SK3I2317M146) are not removable - and doing so will void your limited lifetime warranty. SKB does offer different configurations of their fly rack and some models do have open front, back, and sides, such as the SKB iSeries Injection-Molded Fly Rack - 6 RU, 20" Rack Depth (B&H # SK3I2424M146). If you look at the actual frame of the rack, you can see that there are differences in construction.

Q: 4. What is the height of the cabinet without the wheel casters attached?

A: The Auray ERS-12U Steel Equipment Rack with 3" Casters (12 RU) measures 19.7 x 27.6 x 18.1" / 50 x 70 x 46 cm without taking the casters into account.

Q: 5. What is the height of the rack rail frame?

A: The SKB iSeries Injection Molded Fly Rack (6 RU, 20" Depth) is 6 RU high, but SKB has not provided more specific measurements for the length of individual rack components.

Q: 6. Does this unit have a bottom 45x75mm bolt pattern? To attach StarTech casters?

A: The StarTech Wall Mount Network Cabinet Enclosure is intended to be mounted on the wall. I believe the model that you are looking for is the StarTech Adjustable Depth Server Rack Cabinet with Casters - 12 RU (B&H # STRK1233BKM).

Q: 7. When assembling, are the vertical corner column positions adjustable so I can set the required equipment mounting depth I need?

A: The pre-drilled holes for the vertical corner columns of the Auray ERS-16U Steel Equipment Rack are not adjustable, but you can select to use the mounting holes for 10-32 or 12-24 screws. The full assembly instructions are shown in the user manual: https://www.bhphotovideo.com/lit_files/654187.pdf

Q: 8. Can all side panels be removed?

A: The Auray ERS-16U comes with all of the individual parts and requires assembly. There are four corner columns and two vented side panels, as well as the top plate and bottom plate which includes four casters. Although the two side panels are separate pieces, the instructions show that two corner columns need to be attached to each side panel first before the bottom and top plates can be attached. Each side panel is needed in order to secure the top and bottom plates, and to prevent the corner columns from wobbling. Without the side panels the rack may not have the capacity to safely support the weight of any gear. Here is a link to the instructions so you can see how the rack is put together: http://www.bhphotovideo.com/lit_files/654187.pdf

Q: 9. can i install a wheel?

A: Hello Sunyoung Unfortunately, on this model you cannot install wheels.

Q: 10. Does this fit the blackmagic atem switchers? They are 19" across. New to this so don't know what the standard size(s) and this doesn't show any indication it will work for standard rack mounted blackmagic hardware.

A: Hello Armando Yes, it will fit for the standard BlackMagic hardware.