The Hypercore NEO Slim 98Wh Lithium-Ion Battery from Core SWX is a compact 14.8V, 98Wh lithium-ion V-mount battery that supports a constant 12A draw and peak draw of 16A. With this high output, the battery is designed for cine and broadcast applications, but, of course, it can be used for virtually all other applications as well. At only 1.5" thin and weighing just 1.4 lb, it's also highly suited for gimbal, drone, and other mobile applications. The Hypercore NEO Slim has the ergonomic design, large backlit LCD, and protective over-molded rubberized housing that Hypercore batteries have come to be known for over their past releases.

Like previous Hypercores, the battery is microprocessor-driven, ensuring safety and runtime delivery to camera viewfinders or LCDs; but, leveraging the microprocessor, the NEO Slim features an RFID transmitter on the front that lets you monitor the stored battery data via Core SWX's VoltBridgeID iOS app or an RFID reader. Furthermore, the battery has a modular design consisting of less cabling, allowing for increased quality. With the different parts installed separately and securely inside the housing, the chance of failure is reduced in case of drops, and servicing the battery becomes a simpler, more efficient process as the different parts install plug-and-play.

In addition to the large LCD, the Hypercore NEO Slim has an LED gauge on the side where the user can easily glance over at it. Other features include 2000 charge/discharge cycles, hibernation mode, and the ability to communicate to cameras as well as chargers with both one-wire and two-wire protocols. Such an advanced battery wouldn't be complete without peripheral support. The Hypercore NEO Slim provides a SmartTap D-Tap port and a USB port for powering/charging devices. The SmartTap port lets you power any 12 VDC accessory and transmit battery data if the accessory is able to communicate that information.

The Hypercore Slim is also widely compatible with many different chargers. This V-mount version is compatible with RED, IDX, and Sony V-mount chargers, among others.

2 x 98Wh HyperCore NEO Slim Batteries    GPM-X2S Mini Dual V-Mount Charger    Charge One at 3A or Both at 1.5A Each    Up to 12A Continuous Draw, 16A Max.    Overmolded and Rubberized Housing    Thin Design, Status LCDs on Batteries

The Hypercore NEO Slim is a 14.8V, 98Wh lithium-ion V-mount battery supporting a 12A continuous draw and 16A peak draw. It's only 1.5" thin and weighs just 1.4 lb.

The battery features an eight-cell design utilizing Panasonic cells.

A multipurpose backlit LCD provides nominal runtime based on a 25W load, remaining runtime once connected to a device, and remaining charge time when on a charger.

The Hypercore NEO Slim can communicate to cameras as well as chargers with both one-wire and two-wire protocols.

The packs go to sleep/hibernate when there is no battery usage or movement after a 48-hour period. Once the battery is picked back up, it awakens.

Integrated "smart" D-Tap connector allows users to power any 12 VDC device while also receiving all battery data from the port.

5V USB port allows powering any USB accessory on the set as well as charge mobile devices.

Over-molded, non-slip rubberized housing helps provide cell protection against accidental impacts.

The NEO Slim is firmware-upgradeable via its USB port.

The Hypercore NEO Slim UN38.3 is certified for safer travel (depending on the airline carrier).

The Hypercore NEO Slim incorporates Storage Mode to protect self-discharge and help comply with travel regulations.

Related Questions and Answers

Q: 1. Does the mini charger have a 4 pin power output so it can be used as a power supply?

A: No it does not.

Q: 2. Can this charger, charge a 150 hyper core?

A: Yes it can

Q: 3. How Long Does the Battery last on a Full Charge?

A: This kit includes a pair of 98Wh batteries. How long the batteries will last depend totally on the power draw of the camera and/or accessories it is powering.

Q: 4. Anyone flown with these batteries?

A: Lithium batteries with more than 100 watt hours may be allowed in carry-on bags with airline approval. One spare battery, not exceeding 300 watt hours, or two spare batteries, not exceeding 160 watt hours each, are permitted in carry-on bags. For more information, see the FAA regulations on batteries.

Q: 5. would this battery (BH #CONEO150S) work with the charger from this kit (BH #CONEO9S2FC) ? ...and would this battery be a good choice to power a Luxli Taiko or Godox UL 150?

A: Yes, the Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (V-Mount) is compatible with the charger from the Core SWX Hypercore NEO 9 Mini 98Wh 2-Battery Kit with Dual Charger (V-Mount). Sure, the Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (V-Mount) is a good reliable battery.

Q: 6. Are the D Tap and USB outlets isolated from each other? I would like to power a BMCC4K Camera and an HDMI monitor from one battery, but have heard of damage to cameras from grounding issues if using a D Tap splitter.

A: We would definitely advise against using any type of D-tap splitter.

Q: 7. Can I use the "Core SWX PB70C15 D-Tap Wall Charger" to charge this battery?

A: Yes you can. BH #COPB70C15 will work to charge this battery. https://bhpho.to/3bpbCpq

Q: 8. Will this battery work with this charger? https://www.bhphotovideo.com/c/product/1591442-REG

A: Yes, the Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (V-Mount) will work with the Core SWX NANO Micro 98Wh Lithium-Ion 2-Battery Kit with Dual Travel Charger (V-Mount).

Q: 9. how do I connect this to an Eizo monitor?

A: This can not be connected to an EiZo monitor

Q: 10. went to use my 98wh battery from this kit and the screen lit up but was blank. also the red light on the bottom of my unit turned on. what does this mean? can't get the percentage, etc to display. doesnt seem functional

A: Please contact our live chat support team so that we can advise what steps to take next.