Bringing multiple technologies to bear, including a precise IR laser, built-in inclinometer, and powerful computing, the Nikon 6x21 LASER 50 Laser Rangefinder can deliver accurate measurements at over a mile away—givingyou the critical edge in the field . Its OLED display offers information in yards or meters with the ability to choose the closest or furthest targets and line-of-sight or angle-compensated distances in either yards or meters. Beyond its powerful ranging capabilities, the LASER 50 is also a competent monocular that boasts water and fogproof performance in a lightweight and compact housing.

Class 1 Eye-Safe IR Laser    Measurement Range of Over 1 Mile    Integrated Inclinometer, ±89°    Incline/Decline Adjusted Distance    Tru Target Mode, Target Angle & Height    Compact & Lightweight Monocular Design    Anti-Reflection Multicoated Optics    High-Visibility OLED Display    Nitrogen-Filled, Water & Fogproof    Runs on One CR2 Battery with Auto-Off

• Low 6x magnification presents a wide field of view and ensures you are metering to the correct target
• 21mm objective lens keeps the overall form factor slim and lightweight
• Anti-reflection multicoated optics maximize light transmission to keep views bright and clear with accurate color and crisp clarity
• Spacious 394' field of view at 1000 yards allows you to scan the terrain for targets
• Long 18mm eye relief reduces eye strain and improves viewing comfort
• 3.5mm exit pupil
• ±4 dioptric correction ensures crisp focusing

• 905nm Class 1M eye-safe IR laser
• Measurement range: 10-2000 yards
• Integrated inclinometer measures the relative angle between you and your subject with an angular range of ±89° upward or downward
• Displays in 0.1 yard/meter increments
• Battery compartment is IPX4-rated, weatherproof
• Automatic shut-off after 8 seconds of inactivity conserves battery power
• Runs on one CR2 battery
• Simple & intuitive two-button operation
• Red OLED display is easy to read and displays valuable information including a crosshair reticle for accurate target ranging, inclinometer angle, and distance (in yards or meters)

• Hyper Read: Proprietary algorithm displays distance in 0.3 seconds
• ID (Incline/Decline) technology displays a single range, adjusting for distance and angle, for you to be able to make an accurate first shot
• Choose Actual Distance mode for straight-line measurement without angle compensation
• Target Angle & Height lets you quickly switch between your target's upward or downward angle or its actual height
• Tru Target feature lets you choose between First Target mode (closest target) and Distant Target mode (furthest target) to ensure you range to the subject you want

• Textured exterior provides a sure grip in cold and wet conditions
• Nitrogen-filled and O-ring sealed to be water and fogproof, submersible to 3.3' for 10 minutes
• Battery compartment is IPX4-rated, weatherproof
• Broad 14 to 122°F operating temperature range
• Compact and ergonomic design fits easily in the hand and measures 4.3 inches long
• Light 6.3-ounce weight for portability

Related Questions and Answers

Q: 1. Can I engrave a brick with this?

A: The Creality Falcon2 CV-50 22W Laser Engraver & Cutter cannot engrave a brick. You can engrave the following: Wood, Metal, Cardboard, Bamboo, Rubber, Leather, Fabric, Acrylic, and Plastic.

Q: 2. what is distance/ range?

A: The range is the same as a normal laser pointer

Q: 3. Can the FD1 be used on a RIFLE without an optical scope and it will give me new aimpoint if I enter ballistic info?

A: The PARD FD1-850 Clip-On Digital Night Vision Riflescope with Laser Rangefinder (850nm, 30Hz) can be use without an optical scope but you will need to buy the cantilever mount, https://bhpho.to/3vCrQeB. Yes, the point of impact would be different and you would have to adjust for the change.

Q: 4. How does the GEN II model differ from the Fury HD GEN I model?

A: The original Vortex 10x42 Fury HD Laser Rangefinder Binocular had a Laser Rangefinder range of 1,600 feet. Generation II has a range of 5,000 feet.

Q: 5. My laser sitter stopped working. I put same new batteries it and it still not working. What do i need to do to get it working again

A: You should contact the manufacturer product support.

Q: 6. What is warranty? Where is manufacturer located?

A: Included is a Limited 90-Day USA Warranty, Extendable to Limited 1-Year Warranty with Registration.The manufacturer is located in Arkansas, USA.

Q: 7. Considering the 8x42 configuration and price, does this binocular share the same optics as the NL Pure?

A: The Swarovski 8x42 EL Range TA Laser Rangefinder Binocular with Tracking Assistant (Green) share the same optics and the older EL Range binoculars. They are not the NL Pure optics.

Q: 8. Does this come with lens caps?

A: There is NOT a lens cap, and the design is such that it would probably be difficult to have one. It does come with a padded case with a belt loop and a very secure closure.

Q: 9. will it work in my hi-point .40 cal.?

A: Yes it will. There are several bushings to use in the bore.

Q: 10. Will it work with 9mm? I looked and couldn't find any information on the bore sizes.

A: According to Bushnell the Bushnell Laser Boresighter BH #BULBSQ • MFR #740100C. The boresighter comes with 5 arbors that are compatible with .22 to .50 caliber firearms. Here is the link to the manual: https://www.bushnell.com/on/demandware.static/-/Library-Sites-HuntShootAccessoriesSharedLibrary/default/dw3877201e/productPdfFiles/Bushnell_740100740100C_Laser_Boresighter_Instruction_Manual.pdf