Tilta Tiltaing Advanced Side Handle Run/stop Cable For Arri 7-pin Ext Port Cameras
- Product Code: ga83290
-
Availability: In Stock
The Tiltaing Run/Stop Cable from Tilta connects the Tiltaing Advanced Side Handle to your ARRI camera with a 7-pin EXT port, enabling run/stop triggering with the push of a button.
For Tiltaing Advanced Side Handle For ARRI 7-Pin EXT Port Camera Enables Run/Stop Triggering
| General | |
|---|---|
| Compatibility | ARRI 7-Pin EXT |
| Inputs / Outputs | |
| Connector 1 | 1x 7-Pin LEMO |
| Connector 2 | 1x USB-Type C |
| Physical | |
| Cable Length | 9.8" / 25 cm |
| Packaging Info | |
| Package Weight | 0.07 lb |
| Box Dimensions (LxWxH) | 3.6 x 2.45 x 0.65" |
- Tiltaing Advanced Side Handle
- ARRI camera with a 7-pin EXT port
Related Questions and Answers
Q: 1. Can it be used wirelessly
A: No, it can not be used wirelessly.
Q: 2. Is there an on/off switch for power?
A: This product does not have an on/off switch for power.
Q: 3. Would this work for the Sony fx3
A: Tilta does not list Tilta Run/Stop Cable for Tiltaing Side Focus Handle (LANC) as compatible with the Sony FX3.
Q: 4. Do you have something similar that I could use with the Fujifilm Xt4 ?
A: If you want to hold an SSD in the handgrip, here is a link to a list of options: https://www.bhphotovideo.com/c/products/Handles-Grips/ci/18124/N/3907816589?searchWithin=t5
Q: 5. Is the run/stop compatible with the Canon R5?
A: Yes it is. Choose the USB-C version of the Run/Stop cable.
Q: 6. Will this work with the Nucleus-M series motors?
A: No it would only work with Nano motors and only wired.
Q: 7. Does this control the Nano II focus motor?
A: The Tilta Tiltaing Advanced Side Handle Run/Stop Cable for USB-C Port Cameras is not compatible with the Tilta Nucleus Nano II FIZ Lens Control Motor Kit. You can not use it to pull focus with the Tilta Nucleus Nano II FIZ Lens Control Motor.
Q: 8. How does it connect to the camera?
A: this connects via the rosette and the 1/4-20 screw
Q: 9. is the Handle quickly moveable to different positions?
A: It is moveable to within the confines of how quickly the ARRI rosette can be reset.
Q: 10. Will this cable work with the Nucleus-M hand unit or hand grips?
A: No the Tilta Run/Stop Cable for Tiltaing Side Power Handle (LANC) will not work with the Tilta Nucleus-M. The correct LANC Run/Stop cable for the Tilta Nucleus-M is listed below: Tilta Nucleus-M Run/Stop Cable for Sony FS5/FS7, and Panasonic Eva Cameras BH #TIRS01LANC https://bhpho.to/3M24mFy
Top Bestselling Products
Red Digital Cinema 9-pin Ext To Flying Lead Cable (1.3')
$285.00 $418.95
Camvate Bnc Timecode To Ext 9-pin Cable (1.7')
$78.60 $94.32
Wooden Camera B-box Kit For Red Komodo, Komodo-x & V-raptor
$1,197.00 $1,819.44
Arri Cable Cam (7p) Ext (6p, 2)
$690.00 $848.70
Autoscript Srl-cl Legacy Serial Controller Cable (19.7")
$242.25 $300.39
J5create Usb Type-c Multi-port Hub With Power Delivery (white)
$130.35 $161.63
Ikelite Dlm 1.6" Flat Lens Port Extension
$599.85 $731.82
Teradek Rt Wired-mode Controller Cable (4')
$299.85 $440.78
Arri Cable Cam (7p) Ext (16p, 2.6)
$870.00 $1,244.10
Teradek Rt Wired-mode Controller Cable (6.6')
$299.85 $368.82
Leica Bc-scl7 Battery Charger
$540.00 $837.00
Products You May Like
Heliopan 30.5mm Uv Filter
$119.85 $180.97
Wooden Camera Battery Slide For C300 Mark Iii And C500 Mark Ii (gold Mount)
$1,212.30 $1,660.85
Nanuk 935 Wheeled Hard Case (silver, 28.5l)
$524.61 $823.64
Fujifilm Fujicolor Crystal Archive Digital Pearl Paper (6" X 511' Roll)
$1,051.62 $1,377.62
Kowa Tsn-553 15-45x55 Prominar Spotting Scope (angled Viewing)
$3,297.00 $4,385.01
Z Cam 1tb Exascend Cfast 2.0 Memory Card
$2,187.00 $2,843.10
Tiffen 55mm Warm Linear Polarizer Filter
$60.00 $89.40
Canon Lucia Pgi-72 Magenta Ink Tank
$42.00 $51.24
Kodak Luma 150 60-lumen Wvga Portable Network Led Dlp Projector
$567.00 $680.40
Anton/bauer Performance Series Dual Charger V-mount
$2,697.00 $3,425.19
Lenscoat Legcoat Tripod Leg Protectors (realtree Max5, 3-pack)
$173.25 $226.96