20 Cf Upright Freezer Near Me

Flowcine Foot For Cf Ring (set Of 2)

Product Code: ga83317
Availability: In Stock

$390.00 $522.60

Qty

17 reviews Write a review

Description
Reviews (17)

Shooters using the GLINK Stabilization System can set the rig down without using a stand with the Foot for CF Ring from FLOWCINE, in a set of two. The foot clamps to the Bottom CF Ring to provide a wide base and keep the stabilization system upright.

Two 1/4"-20 and three 3/8"-16 female threads are available on each foot to mount various accessories such as LCD monitors. Secure multiple feet in a V-shape to create the widest base possible and prevent the GLINK from falling forward or backward.

Designed for GLINK Stabilization System Holds GLINK Upright without Stand Clamps to Bottom CF Ring 1/4"-20 and 3/8"-16 Female Threads

General
Compatibility	FLOWCINE GLINK
Physical
Mounting	1x Clamp 2x 1/4"-20 3x 3/8"-16
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer

Each foot clamps snugly onto the CF Ring of the GLINK at any angle you choose. Slide it to the left and right, rotate it forward and backward, then secure it in the location that meets the demands of your rig and the terrain.

Each foot is machined with two 1/4"-20 and three 3/8"-16 female threads. This creates space for various accessories and monitors to be mounted, broadening the functionality of your rig while eliminating the need to secure additional clamps.

Related Questions and Answers

Q: 1. Will these fit the Manfrotto Befree tripod?

A: No, the spikes for the Befree are item # 12SPK3

Q: 2. I have a 190PROB what spike foot will fit?

A: Your Tripod is in aluminum mine is in carbon, The tip of the pole is 5 / 8 in diameter, If your is 5/8 then it will fit.

Q: 3. Will these fit the 190CXPro4?

A: The Manfrotto Retractable Spiked Foot Set, BH # MA116SPK3 is the correct set for the 190CXPRO4. https://bhpho.to/3coKk66

Q: 4. Do I need to buy the FLOWCINE Serene with Extension arm if I own the EasyRig Vario 5 with 5" Extension arm? Or is this more for operator preference?

A: The Flowcine Serene Arm is an accessory for the EasyRig Vario 5 that will add more stability.

Q: 5. Has anyone tried to use the FLOWCINE Serene with a Flycam Flowline vest?

A: Yes I purchased be and it works great! It's rather difficult to install onto the easy rig though!

Q: 6. Could this be mounted to the EasyRig MiniMax?

A: According to FLOWCINE, this is to be used with the Easyrig 2/2.5/3 and Vario 4/5 support bars.

Q: 7. Will these work for my MT295A3 ?

A: The Manfrotto 15SPK3 Spiked Feet for Select Manfrotto Aluminum Tripods (Set of 3), BH # MA15SPK3 would be better. https://bhpho.to/3rW3ogF

Q: 8. Is this compatible with the Canon 300mm EF 2.8 L version 1, non IS?

A: No, the Leofoto CF-01 Replacement Lens Collar Foot for Select Canon Lenses is not compatible with the Canon 300mm EF 2.8 L version 1, non IS.

Q: 9. Will these fit on a 190X Tripod? I ordered a similiar set of feet from Amazon but they were too small to fit on the legs.

A: Yes the retractable Spiked Foot Set (3) are for the 190XB, 190XDB, 190XPROB, 190CX3, 190CXPRO3, & 055CXPRO4 Tripods.

Q: 10. Could the serene be mounted on an Easyrig Cinema 3 ?

A: Yes, you will be able to mount this pn the Easyrig Cinema 3.

Jerry	28/09/2024
I have had my manfrotto tripod for many years in difficult and varied situations where due to hard use and accidents I had gradually lost all of the feet and was reduced to using the rubber caps. The caps are almost worthless and then I finally ordered in the replacement retractable spiked feet. I had forgotten how good they were. I use mine mostly with the spikes fully retracted but there are occasions when I need the spikes and I like the versatility of that. They work really well, were a snap to install and now I carry the little phillips screwdriver to keep them tight. I can change from spike to rubber foot in about 30 seconds if I need to. These were not cheap, but they appear to be quality and so far are working well. 5

Bigkrackers	26/09/2024
Works for 3001 models as well. Needed a replacement foot for my older 3001BN. 5

Barry	26/09/2024
Too bad Manfrotto don't include these on their tripods. I feel they are a must if you take your tripod outside at all.They work great, old feet a little hard to get off (they are glued on.These attach ouite easily, they do make the tripod slightly longer. 5

Philippe SXM	29/08/2024
I order it for my tripod 190XB with 802RC4 head. The construction is strong and it fit perfectly to the legs of the tripod. I find it also easy to install. Efficient for outside and in house purpose. It was the piece missing to be entirely satisfied by my tripod. Now I am! 5

LorneR	25/08/2024
My tripod slides on certain surfaces like ice or packed snow, now it can dig in. The 190 tripods are light to start with, so any stability device is welcome. They can be a little boring too, but these feet make them seem more impressive. Installation is easy, but I was a little concerned how tight I could go before something stripped. They look metal in the photos, but are actually a hard plastic. The rubber feet are a durable rubber. Overall I'm happy with them. A simple item to improve a simple tripod. 5

The nikon guy	11/08/2024
I love theses spiked feet, very easy to install it only took a few minutes and they really make a difference if you do a lot of outdoor shooting. I just don't know why Manfrotto doesn't include them with there tripods. 5

Nightprowler	09/08/2024
Locks into the ground very well...gives me a sence of security when I'm videoing in semi difficult situtations 5

vanderbiltjen	09/08/2024
I bought the 190XB tripod legs for my heavy spotting scope. The tripod is super sturdy-I'm so excited to have these spiked feet for the legs. 90% of the time, I use the tripod outside in the mountains. The spiked feet make my tripod even more stable in the uneven terrain. 5

Mark	11/07/2024
My carbon fiber tripod came with rubber tips only suitable for indoor work. These spiked feet fit like a glove and I am now ready for the great outdoors. 5