Designed to accommodate 3, 6, 8, or 9 duplex power modules, the Middle Atlantic MPR-3A Modular Raceway provides a rugged housing that allows the user to configure the right power distribution system for each application. Constructed of 18-gauge steel, this raceway features electrical knockouts for cable entry, an integral J-box with a removable cover, and abundant cable lacing points along both sides.

Lets to design and build a custom power distribution system to your specifications

Equipped with electrical knockouts (1/2" and 3/4") on both the ends

Lightweight raceway with back-mount support clip that allows mounting in any position on a vertical or horizontal axis

Raceway can be cut to any custom length of 2.0" (50.8 mm) increments

Modules can be positioned anywhere along the raceway in 2.0" (50.8 mm) increments

Basic and controlled (dry contact) power modules available in 15A, 20A, and 30A

USC-6R, MPR-SEQA, MPR-SEQ-1CA, or any maintained dry contact can be used for control

Standard and isolated ground modules

NEMA, IEC, Twist-lock, and Neutrik receptacles

Convenient genderless connectors ensure fast & safe assembly (no hardwired inter-chassis connections)

A open deep raceway, with no cross divider interference ensures fast and easy assembly

Threaded grooves along the length of extrusion allow attachment of cable management ties for low-voltage control

Multiple junction box options support different wiring applications and circuit termination capacity

Laser Knock-Outs (LKO) in end caps for power connections

Custom laser engraving available

RoHS and CE compliant

Related Questions and Answers

Q: 1. Does this rack come with mounting screws? I see something listed as ‘assembly kit’ as included in the packaging but am unsure if that entails that it comes with mounting screws. Thanks in advance!

A: The assembly kit is what allows you to build the rack since it is not pre-built to you. For mounting gear, you will need to by separate rack screws. B&H # AURSW1032100.

Q: 2. Does it come with front and rear rack rails?

A: Included In the Box, of this Middle Atlantic ERK 19" Stand-Alone Enclosure ERK-4025LRD. Middle Atlantic ERK 19" Stand-Alone Enclosure ERK-4025LRD, Rack Frame, Top Panel, Bottom Panel, 2 x Side Panels, 4 x Rackrails (2 pairs, front and rear),and a Limited Lifetime Warranty to Original Purchaser.

Q: 3. Does this have swing out feet to prevent it from tipping over when batteries are being charged?

A: Yes, the SWIT 2-Channel Simultaneous Charger for V-Mount Batteries does have swing out feet to prevent it from toppling over when batteries are being charged.

Q: 4. does this come with the screws?

A: Yes, the Middle Atlantic RK10 Rack does come with the screws that are required to assemble the rack.

Q: 5. will this hold a small color laser jet printer?

A: The shelf is 32.0 x 12.0 and can hold 50lbs. Most small laser jet printers are under 50lbs, and if the printer fits in that footprint then it's good.

Q: 6. Does this work with the BMPCC4k?

A: With the Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack (SKU: BLCCPOC4KDC), you should be able to power your Pocket Cinema Camera with this Battery Adapter. https://www.bhphotovideo.com/c/product/1434003-REG/blackmagic_design_cable_ccpoc4k_dc_blackmagic_pocket_camera_dc.html

Q: 7. will this work with Blackmagic Design Teranex Mini Rack Shelf ?

A: Yes, they are both standard 19" racks.

Q: 8. Can I keep the Middle Atlantic RK2 RK Series Rack (2U) on it's side? I want to put it under my desk but next to the desk leg. I keep a Audio Mixer and PDU in the Rack.

A: If the equipment doesn't mind the position, I doubt the rack will mind at all. I would be sure, positioning it sideways, that I had four rack screws in each piece of gear.

Q: 9. Can wheels (casters) be added to this desk (as an option)?

A: you cant get casters as an option for this from Middle Atlantic, but there are adjustable feet that screw out to raise of lower. you can probably just unscrew them till the come out and then screw a threaded caster wheel in its place. Not sure on the size of the screw for the foot adjustment.

Q: 10. Is the finish a black oak grain like the Raxxes racks?

A: It's a flat black paint. No grain is visible