The Deity Microphones DA3L is a Microdot to 3-pin LEMO adapter designed to interface a Microdot-equipped microphone with a wireless microphone transmitter outfitted with a 3-pin LEMO jack.

Simply connect the Microdot output of your microphone (available separately) to the DA3L's female Microdot input, then plug the adapter into your qualified transmitter (available separately). Lightweight and compact, the convenient in-line design of the DA3L makes it well suited for use in video production, ENG, conferences, and houses of worship.

For Microdot-Equipped Microphones    For Transmitters with 3-Pin LEMO Jack    Convenient In-Line Design    Lightweight & Compact

• Audio Limited: A10-TX and A10-TX-US
• Lectrosonics: SSM, DBu-Lemo
• Sennheiser: SK 50, SK 250, SK 2000, SK 3063, SK 5012, SK 6000 series, and SK 9000 series
• Shure: UR1MLemo3 and AD1/ADX1
• Wisycom: MTP30 and MTP41S
• Zaxcom: TRXLA3 and ZMT3

Related Questions and Answers

Q: 1. Will this work with Rode Reporter Omnidirectional Handheld Interview Microphone or can you suggest a wireless solution for this mic?

A: The Rode Reporter is a dynamic XLR microphone. A wireless system like this would be a good option to use with it: https://www.bhphotovideo.com/c/product/1187383-REG/rode_news_shooter_newsshooter_kit_digital_wireless.html?sts=pi&pim=Y

Q: 2. Does it work with Rode Wireless Go II?

A: The V-Link adapter should work to connect the output from the Wireless GO II receiver to an XLR mic input. This adapter does have a built-in phantom power converter which would not be of use with the transmitter, but if used as a standard 3.5mm TRS to XLR male cable, it should function properly. As another option, you could use the Cable Techniques 18" 3.5mm R/A Low-Profile XLR-3M Male for RODE Wireless Go Output to Field Mixer and Recorder (B&H # CACTGOX3M18) which does not have the phantom power converter.

Q: 3. I already have a Remote Audio single bay charger. Could I use that to charge this battery?

A: The Deity Microphones S-95 Smart Battery is intended for use with the Deity Microphones DQC1 Smart Battery Charger (B&H # DEDTS0287D67). We are unable to confirm whether the Remote Audio HIQ1CH1 Single-Bay Charger for Hi-Q Batteries would work with the S-95 battery.

Q: 4. Does it come in black?

A: The Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable - 12" is not available in black, but we do have similar cables from other manufacturers in black. The Cable Techniques Rode Wireless GO to Canon C70 Coiled Low-Profile Cable - 8 to 15" (B&H # CACTGOCC708) and the Cable Techniques Rode Wireless GO to 3-Pin XLR Male Low-Profile Cable - 18" (B&H # CACTGOCCX3M8) will both work in the same way as the Deity cable.

Q: 5. Does this convert unbalanced TRS to balanced XLR?

A: TS connection mics are usually only compatible with the mic transmitters or mic inputs that they are made for specific compatibility with.

Q: 6. Can someone describe what is connected to each 1/8 in. connection (tip. ring, sleeve) in terms of signal, power, and ground?

A: A specific TRS input wiring schematic is not available for the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion, however we can confirm that the D-XLR is compatible with microphones using the 3.5mm "Sennheiser" wiring configuration for compatibility. This adapter is not compatible with microphones wired for compatibility with Sony input connections.

Q: 7. Will this work with a Tram TR50 lav with a Sennheiser (G4) 3.5mm jack? Cheers

A: Yes, according to Deity this will work with any 3.5mm TRS connector.

Q: 8. Will this work with Deity w.lav microphones? Other similar adapter from Movo does not work.

A: Yes, the D-XLR is compatible with Deity's V.Lav microphone. The D-XLR takes 12 to 48 VDC phantom power from the mic preamp on the camera, recorder or mixer you are connecting to and converts it into 3V plug-in power, which is required for operation of the V.Lav.

Q: 9. If I use this adapter, will I be able to use my deity v-mic d3 pro on my tascam dr60 mk2???

A: This adapter will allow you to connect to one of the XLR input on the Tadcam DR60D mkII, and use the 48 volt phantom power provided by the recorder.

Q: 10. Does this provide phantom power like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion BH #DEDXLR? I want to use my Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface to stream on Twitch with. Would this work?

A: Yes, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable can be used for the same types of applications as the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion. Like the D-XLR Adapter, the V-Link Cable has a built-in power converter that will allow you to use phantom power (48V) from the XLR input on the Focusrite Scarlett Solo USB Audio Interface and then converts it to plug-in power (3 to 5V), which the Deity Microphones V-Mic D3 Pro Shotgun Microphone requires to function.