The Schoeps K 5 LU Adapter Cable is a cable designed to be used with a CCM-L microphone. It connects the Lemo output of the mic to a 3-pin XLR male termination, allowing you to use the mic with conventional preamps. This cable measures 16.4' long.

Use with CCM-L Compact Mic    Connects CCM-L Mic to Conventional Gear    Lemo to 3-Pin XLR Male

Related Questions and Answers

Q: 1. Will this work with the small hd cine 7?

A: Yes, the Hawk-Woods D-Tap to 2-Pin LEMO 0B Male Cable would work with the SmallHD Cine 7 display.

Q: 2. Hi, Does this have the LEMO 2-Pin OB connector? ie, compatibility w/ Teradek/SmallHD?

A: The Transvideo Mini 2-Pin LEMO to Mini 2-Pin Lemo Male Coiled Cable for StarliteHD on RED does provide the correct 2-Pin connection as those used on Teradek and SmallHD products. All those products use the standard Arri pinout configuration: pin 1 is ground, and pin 2 is positive.

Q: 3. Will this cable work to connect a schoeps CMBI to a regular 3 pin xlr input with phantom power?

A: The CMBI is designed for connection to unbalanced high impedance inputs and to allow the capsules to be battery powered or powered externally via plug in power (+6v max) . It would not be compatible with the K 5 LU or phantom power.

Q: 4. Second question: Will this also work with the Synco D2 when plugged into the new Beachtek-Max Active Audio Adapter DSLR?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 5. It says male but the image shows a female lemo. Which is it?

A: The title is saying that the D-tap port is male on the cable, the LEMO port on the cable is female.

Q: 6. If I use this with a camera or recorder that has two stereo xlr inputs but records to only 2 channels (Such as a Sony FS100), will I be able to use the other XLR input for the second channel, or does Tentacle sync record timecode to one track, and reference audio to the second?

A: To answer your question, yes. While it is true that the Tentacle transmits two channels, this adapter only connects to the channel that transmits the timecode.The schematic for this adapter (on the manufacturers site) clearly shows the timecode out of the Tentacle is connected to pin 2 of the XLR and both remaining XLR pins are connected to the ground.Besides, the way a standard XLR connector is wired allows it to only transmit the signal of one audio channel anyway, so only the timecode goes to one audio channel of your camera or recorder, and you can use the other XLR connector on your camera or recorder for any other audio you wish.

Q: 7. Does this provide phantom power like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion BH #DEDXLR? I want to use my Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface to stream on Twitch with. Would this work?

A: Yes, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable can be used for the same types of applications as the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion. Like the D-XLR Adapter, the V-Link Cable has a built-in power converter that will allow you to use phantom power (48V) from the XLR input on the Focusrite Scarlett Solo USB Audio Interface and then converts it to plug-in power (3 to 5V), which the Deity Microphones V-Mic D3 Pro Shotgun Microphone requires to function.

Q: 8. Will this work with the Beachtek DXA-PRE Two-Channel Preamplifier for Cinema Cameras?

A: While the AndyCine cable may work, we only recommend the following cable for the Beachtek DXA-PRE. Beachtek BT-PWR D-Tap to 2-Pin LEMO Power Cable for DXA-ALEXA / DXA-CINE BH #BEBTPWR

Q: 9. i was wondering if this is the cable that will let me sync my Sound Devices 633 to Red epic/Scarlet Cameras?

A: Yep! It's what we use for the exact same purpose. We bought a knock-off one first, and that didn't work. This is great.

Q: 10. Is this cable wired properly to work with the Core SWX SPU-4 Compact Power Supply?

A: yes it is.