4K Hdmi Connect Box

Dvdo 4k Hdmi Matrix Switcher 4 X 2

Product Code: ga84655
Availability: In Stock

$717.00 $1,111.35

Qty

0 reviews Write a review

Description
Reviews (0)

Route up to four 4K HDMI sources to two 4K UHD displays with this 4K HDMI Matrix Switcher 4 x 2 from DVDO. The switcher can support up to 4K UHD resolution video and can independently descale each input to 1080p. HDMI output one can de-embed analog audio while HDMI output two can de-embed digital S/PDIF audio and supports ARC function.

HDCP 2.2 and EDID management are supported by the switcher. Control can be achieved via the included IR remote, RS-232 input, or onboard buttons. Identifying the sources you are switching between is made easy with the LED indicators on the front panel.

4 x HDMI Inputs, 2 x HDMI Outputs Supports up to 4K UHD HDMI Resolution De-Embeds Analog & Digital Audio HDCP Compliant, EDID Support Switching via RS-232, IR Remote, Buttons LED Indicators

Processing
Switching Type	IR Remote, Pushbutton
Input
Video Inputs	4x HDMI Female
Input Video Format	HDMI (8-Bit 4:4:4) UHD 4K at 24/25/30/50/60 fps DCI 4K at 24/25/30/50/60 fps 1080p at 24/30/50/59.94/60 fps 720p at 50/59.94/60 fps 576p at 50 fps
Input Audio Format	LPCM (Linear Pulse-Code Modulation)
Embedded Audio Input	HDMI
Output
Video Outputs	2x HDMI
Output Video Format	HDMI (8-Bit 4:4:4) UHD 4K at 24/25/30/50/60 fps DCI 4K at 24/25/30/50/60 fps 1080p at 24/25/30/50/59.94/60 fps 720p at 50/59.94/60 fps 576p at 50 fps
Audio Outputs	1x 1/8" / 3.5 mm TRRS Headphone/Microphone Analog Female 1x TOSLINK S/PDIF Female
Output Audio Format	Analog S/PDIF
Embedded Audio Output	HDMI
Connectivity
Other I/O	1x Block 3-Pin RS-232 Input
HDCP Support	Yes, Version 2.2
HDR Support	Yes, HDR10/Dolby Vision/Hybrid Log Gamma
DTS Compatibility	DTS-HD Master Audio, DTS:X
Dolby Compatibility	Dolby Atmos, Dolby TrueHD
Hardware
Wi-Fi	No
Bluetooth	No
Power
Power I/O	1x Barrel (5 VDC at 1 A) Input
Power Consumption	Device: 3.3 W
General
Operating Conditions	32 to 77°F / 0 to 45°C at 10 to 90% Humidity
Storage Conditions	-4 to 158°F / -20 to 70°C
Dimensions	7.9 x 3.9 x 0.8" / 200 x 100 x 21 mm
Weight	1.1 lb / 480 g
Packaging Info
Package Weight	2.115 lb
Box Dimensions (LxWxH)	10.6 x 6.9 x 3.3"

Routes four HDMI sources to two 4K UHD displays

HDCP 2.2 compliant, EDID support

Each output supports independent downscaling from 4K to 1080p

Analog audio de-embedded from HDMI output 1

Digital audio de-embedded from HDMI output 2 or HDMI ARC from TV

Supports 12-bit deep color, 3D, lip-sync, and lossless HD audio format pass through

Rich control options including Rs-232, IR remote, and push-button controls

Related Questions and Answers

Q: 1. Can this device be used to connect turntable output rca to hdmi for 50 foot run to a receiver?

A: That would not be possible with the DVDO HDMI 2.0 Audio Extractor. If you want to combine the audio from your turntable, with a different video source and your turntable has a phono preamp built in, then you would want to use something more like BH #MU100527

Q: 2. Can this device generate a CEC on/off to put a CEC operable monitor into/out of standby by applying and removing HDMI sources?

A: Yes, the DVDO HDMI 2.0 Audio Extractor can auto-detect input signal status, and automatically trigger a CEC command to turn on or off TV with CEC support.

Q: 3. Will this device extract audio from 4K Apple TV and output to rca into my existing amplifier?

A: Yes, the DVDO HDMI 2.0 Audio Extractor should work for extracting audio from your T.V. to RCA so long as your T.V. has an HDMI output that would mirror the video feed. You may want to first extract the audio before sending the video signal to your T.V. instead of extracting after it's been sent through the T.V.

Q: 4. Does the HDMI output still retain the full HDMI Audio output?

A: Yes it does. The Audio is still present on the HDMI output when using the DVDO HDMI 2.0 Audio Extractor.

Q: 5. I have a dumb HDMI monitor, not a TV. Will this device extract the audio without audio feedback from the monitor?

A: The DVDO HDMI 2.0 Audio Extractor is capable of extracting 2 channel or 5.1 channel audio from an HDMI output device while still passing the audio with video over HDMI. To avoid feedback to external audio monitors, turn down to 0 on any audio from the source and destination display.

Q: 6. Does the DVDO HDMI 2.0 Audio Extractor output Stereo Audio or 2 channels of Mono audio?

A: The DVDO HDMI 2.0 Audio Extractor will take the input and output it the way it came in, i.e., if it comes in as stereo, it will output it the same way.

Q: 7. Can I run 4K from my Xbox series x to my projector with this ?

A: Yes you can run 4K from your XBox into your projector using the DVDO DVDO-AIR-4K.

Q: 8. Does this device extract audio from Apple Tv to output to amplifier via Rca Output?

A: Yes, the DVDO HDMI 2.0 Audio Extractor does support HDCP 2.2 and that is one of the requirements for the Apple TV. It should work.

Q: 9. Does the unit come with a power cable or power supply?

A: Yes, the DVDO HDMI 2.0 Audio Extractor comes with a power supply included.

Q: 10. This lists a bracket as an accessory, is this fully mountable in a 19" equipment rack with the hardware included?

A: Yes, the MuxLab 4K60 HDMI 8 x 8 Matrix Switcher will be able to be mounted to an equipment rack with the included bracket.

There are no reviews for this product.