Enjoy transmitting Ethernet signals up to 6.2 miles with this Black Box Compact Gigabit Ethernet Media Converter. Featuring SC connector for Fiber, this unit allows you to transmit gigabit signals across singlemode fiber, and it supports jumbo frames for multimedia applications. Auto-cross enabled, you can use either straight-through or crossover-pinned cable.

Ethernet to Singlemode Fiber Converter    Frequency: 1310nm    Supports Link Fault Pass-Through    Auto-Cross Enabled

Related Questions and Answers

Q: 1. Where's the driver?

A: The drivers for the Plugable USB-A and C to 2.5 Gigabit Ethernet Adapter, B&H # PLUSBCE2500, are available on the plugable website. https://bhpho.to/3UH9Mtu

Q: 2. Can this adapter be used with a desktop running windows 10 and currently has Wi-Fi that is not working?

A: Yes, the Xcellon USB Type-C to Gigabit Ethernet Adapter will allow you to add an Ethernet port via USB-C to your computer if there is no Ethernet connection.

Q: 3. Can this function and be connected to an Android smartphone's USB-C port to access an ethernet cable's broadband internet connection?. The smartphone is Android OS and not WIndows 10 which I know would work on my desktop PC.

A: Some phones have the drivers needed. Some don't. If your phone happens to have the drivers. It would work. But you would need turn off your Wi-Fi or possibly need to put your phone in Airplane mode.

Q: 4. Does it work on MacBook? One review said it does not work with MacPro.

A: Yes, the TRENDnet USB 3.0 to Gigabit Ethernet Adapter BH #TRTU3ETG is compatible with macOS up to 10.15.

Q: 5. Can this be used to connect a camera (Foscam F18910W) with a LAN connection directly to a laptop computer via USB-C?

A: Yes, this adapter should be able to connect any device with an RJ45 interface to a computer with a USB-C input.

Q: 6. Can this be used and function in a smartphone with it's USB-C port to get high speed internet vs using the phone's Wifi?

A: Dear customer! Thanks for your interest in TRENDnet! Supported OS Windows® 10 Mac OS® 10.15 - 10.6 Hope this helps! If you have any more questions, you can always respond directly to this thread and someone will be happy to try and help answer any additional questions you may have! Have a great day! Adrian TRENDnet CS

Q: 7. Can I use a bidirectional SFP on this? If so, what brand would be compatible (CISCO, Netgear, etc.)?

A: The TP-Link MC220L Gigabit SFP Media Converter BH #TPMC220L is compatible with: For MC200CM: 850nm For MC210CS: 1310nm For MC220L: depends on the used SFP module For MC200CM: 62.5/125μm multi-mode fiber (≤220m); 50/125μm multi-mode fiber (≤550m) For MC210CS: 9/125μm single-mode fiber (≤15km) For MC220L: depends on the used SFP module It should work with other brands as well.

Q: 8. What chip is used in this adapter?

A: The only specs available are here: http://www.xcellongear.com/product/16578/Xcellon-USB_EA_2-USB-Type_A-to-Gigabit-Ethernet-Adapter

Q: 9. Would these work with Hikvision 4k cameras in a 200 foot run of coax. And live in an outdoor encloser?

A: The Lorex Coaxial to Ethernet Converter Kit is not rated for outdoor use. However, if you protect the kit in an enclosure it would work. Also, note that Cat6a, and Cat5e cables can be run and work over 200ft. Another good option for your needs is listed below. EverFocus PALUN II Ethernet over Coaxial Converter with PoE BH #EVPALUNII

Q: 10. Can I use unshielded CAT6 with this device, or does it have to be shielded? I notice the ethernet ports on the surge protector are not shielded or metal.

A: We would recommend using shielded cables with the APC ProtectNet with Gigabit Ethernet Protection.