Connect your high-resolution source device to your compatible display over a long distance with the 98' SalRay Works Active Optical HDMI Cable. It supports resolutions up to 8K UHD, plus Audio Return Channel (ARC), HDR10, HLG, Dolby Vision, Dolby Atmos, DTS:X, HDCP 2.2, and more for use with various types of content. It uses fiber optic wiring to support long cable runs and virtually eliminate EM and RF interference. The cable is powered by your HDMI devices, so no external power source is required.

Supports 8K UHD up to 30 Hz    HDR10, HLG, Dolby Vision Support    HDCP 2.2 Support    Dolby Atmos & DTS:X Multichannel Audio    Rejects EMI & RFI

This active optical cable doesn't need separate external power, simplifying installation.

Low smoke, zero halogen (LSZH) cables feature a flame-retardant jacket that does not emit harmful gas when burned and helps prevent the spread of fire.

The bend radius of this cable helps prevent possible fiber damage when bent around a corner.

HD video, audio, and data are integrated into the cable, and high-speed, two-way communication and IP-based application technology can be achieved through the cable. Connect an Ethernet cable to just one connected device and share that connection with other compatible devices via HDMI.

CEC is a technology that lets you control multiple compatible HDMI-connected devices simultaneously. By connecting a CEC-compatible TV to a compatible set-top box, you can use just one remote to conveniently control both.

HDR expands the brightness of your content to create more realistic images. This cable supports the HDR10, HLG, and Dolby Vision HDR formats .

• 8K UHD @ 30 fps, 8-bit color, 4:2:0
• DCI 4K @ 120 fps, 8-bit color, 4:2:0
• DCI 4K @ 60 fps, 16-bit color, 4:2:0
• DCI 4K @ 30 fps, 16-bit color, 4:4:4
• 4K UHD @ 30 fps, 8-bit color, 4:4:4

• CEC & CEC extensions
• Dual-View
• Multi-Stream Audio
• 21:9 aspect ratio
• Dynamic auto lip sync
• 3D video
• Dolby Atmos & DTS:X multichannel audio
• Dolby TrueHD & DTS-HD Master Audio
• Wider color gamut
• Deep Color
• SACD audio pass-through

• 28 AWG 7C jacket
• Four internal fiber optic wires
• Internal PVC covering
• Kevlar fiber / aramid yarn
• Immune to RF and electromagnetic interference

Related Questions and Answers

Q: 1. What Protocol does this head uses to? RS 422? (VISCA) So any device or controller with RS 422 can control this? Like software based or any controller with VISCA protocol? or does it only works with your controller? Need a lot of information here. If it's visca protocol is it the standard visca protocol or a modified visca protocol? How about the Motor speed or angle? Can you please put a lot of information for this? Thanks

A: You can use LANC for the camera with the SalRay Works 5-Channel Controller( BH #SAMTTX90 • MFR #SRW-MT-TX90 You can use Panasonic protocol with the SalRay Works 4-Channel Controller BH #SAMTTX80 • MFR #SRW-MT-TX80

Q: 2. Does this support 4K 60fps with external RAW from an Atomos Ninja V to Sony FX3/A7siii?

A: The 8Sinn eXtraThin HDMI Cable (31.5") BH #8S8XTHHDMIHD will support 4K at 60 FPS.

Q: 3. I have old 819 floor mic that has very low sensitivity. Desire to use the new preamp but need this cable to connect it to the floor mic 3 pins. Is the new preamp compatible with the old mic? Looking forward to a boost in gain and may be a lower noise? Please advise do expect a wiring change may be needed.

A: I believe it is, same pin type and there wouldn't be any need to wire differently. To be sure I would contact Shure (no pun).

Q: 4. i have a thunderbolt 2 port on my mac and i am want to connect it the apple thunderbolt 2 display. will this work over an 18 foot distance?

A: It can be done, but this cable is optical so it can not transmit power, only data.

Q: 5. Does it have the follow you feature? Is it capable of auto-following the moving person?

A: The Alfatron 1080p USB 2.0 PTZ Camera with 10x Optical Zoom (B&H # ALF10XU2CAM) does not have an auto tracking feature.

Q: 6. How is this Device Powered?

A: this device is powered via included Ac adapter

Q: 7. will it deliver 4k 60fps with Ninja V and sony a7 siii?

A: The ZILR 4Kp60 Hyper-Thin High-Speed HDMI Secure Cable with Ethernet (17.7") BH #ZI4KP60E17 • MFR #ZRHAA01 will delver 4096 x 2160 at 60 Hz.

Q: 8. Anybody get NDI to work on these? I just got 2 but I cant get them to output NDI. I've been using NDI for some time now and have other Panasonic PTZ cameras with NDI. I have everything updated and have NDI license keys ready to install on them, but they don't show up in Studio Monitor.

A: Make sure the that the NDI functionality has been properly registered on the camera. If the problem persists, you can always give us a call.

Q: 9. I can use with 1 single sdi cable the video, power and control?

A: Unfortunately, SDI output does not support power delivery. However, the FeelWorld SDI/HDMI PoE PTZ Camera with 20x Optical Zoom has POE power support, and NDI. You could power and send out low latency NDI video using Cat6a cable. You could also decode the NDI output back out to SDI if required. Decoder NDI to SDI https://bhpho.to/3zrX8D2 POE Power injector https://bhpho.to/42YwnUo

Q: 10. Does it support NDI HX protocol?

A: The FeelWorld SDI/HDMI PoE PTZ Camera with 20x Optical Zoom offers no NDI support of any kind. If NDI is within your pipeline, you could encode HDMI to NDI, with something like the BirdDog Mini HDMI to NDI Encoder/Decoder.