Convert digital audio to analog stereo audio for compatibility with virtually any stereo playback system with the Vanco Digital to Analog Converter with Dolby 5.1 to PCM downmixing. Switch between RCA coax S/PDIF or TOSLINLK optical digital audio inputs, with uncompressed signals supported.

Convert Digital to Analog Stereo Audio    Coax S/PDIF and TOSLINLK Optical Inputs    L/R RCA Analog Stereo Output    Dolby 5.1 to PCM Downmixing    24-Bit S/PDIF Incoming Bitstream on L/R    2-Channel LPCM at 32/44.1/48/96/192 kHz

24-bit S/PDIF incoming bitstream on left and right channels

2-channel LPCM at 32, 44.1, 48, 96, 192 kHz

Related Questions and Answers

Q: 1. Can I use this to go from hd sdi drone a video switcher preview output to a rd connection and split it to send a video signal to multiple screens

A: This will make an analog video signal from SDI. Not completely sure of your workflow.

Q: 2. worked for 2 weeks then the main SDI input died. in the meantime, it would lose the picture and it would power reset. what could cause the problem?

A: I would imagine there is a setting or input that is incorrect. If those are correct, then I would suggest an exchange. So that we may be of best assistance, please email and tell us of your set up and what you wish to do. provideo@a href= http://bhphoto.com target= _blank bhphoto.com./a

Q: 3. What is the highest bitrate frequency for the toslink I/O and for the coax I/O - 96kHz or 192kHz?

A: The TOSLINK and COAX sample rate options for the Vanco PulseAudio Digital-Analog Audio Extender are 48k, 96k, or 192k at 16-bit, 18-bit, or 24-bit.

Q: 4. Is there a delay in the audio? I'm looking to use this to convert audio from my TV to a sonos Play 5.

A: No delay. It works very well for me.

Q: 5. anyone know if this is compatible with an ultrastudio mini recorder? need to convert N64 composite for streaming via OBS. Thx!

A: This may not work if the signal is not NTSC broadcast standard frequency. We do not have direct experience.

Q: 6. Can the word clock input receive timecode from a Deity TC-1?

A: No, the word clock input on the Dangerous Music CONVERT-8 Reference-Grade Digital-to-Analog Converter cannot receive timecode from a Deity TC-1 Timecode Generator Box. Word clock and timecode serve different purposes. Word clock is used to keep a perfectly timed and constant bitrate to avoid timing errors that can cause data transmission errors while timecode provides metadata about the media data being transmitted.

Q: 7. does this come with a power supply?

A: The unit comes with a separate plug-in power supply.

Q: 8. I just bought this Analog to SDI,for Sony nxcam hxr-nx3/1 to BM ATEM. Can anyone help how to setup up?

A: Not much to set up. As I recall there are some switches on it to set as. I connected it and flipped the switches until I stumbled onto the right combination.

Q: 9. I have a HS 600 data video with SD-SDI output at 720 by 576i. Can this converter convert the signal to HD-SDI?

A: No, this converter doesn't upconvert video, it just converts it from analog (component/composite/s-video) to SDI. The Mini Converter UpDownCross HD though, can upconvert SD-SDI to HD-SDI https://www.bhphotovideo.com/c/product/1401679-REG/blackmagic_design_convmudcstd_hd_mini_converter_updowncross_hd.html

Q: 10. are all the pins supposed to be up ?

A: I am guessing you mean the DIP Switches. These switches would be set according to how you want to run this converter. Some of the settings include Analog or AES audio and channel selection. The switch settings are listed on the back of the unit.