The 145mm Film Devices Vibration Isolator Kit is a vibration isolator system made to reduce camera vibration when shooting with cameras and gimbals in moving vehicles.

With cables and tie-down blocks that can be removed, the vibration isolator is adjustable to support load capacities up to 18 pounds, and it boasts a maximum magnetic holding force of 240 pounds. The kit includes one 145mm vibration isolator, four 88mm rubber-coated magnets, four 7" articulating arms, a 7/16" wrench, an industrial-grade hard case, and various nuts and washers. Use the VI-145-XARM bracing kit (available separately) to mount the isolator kit on vertical metal surfaces.

For Cameras with Gimbals    Load Adjustable up to 18 lb    Magnetic Holding Force up to 240 lb    For Shooting in Moving Vehicles    Removable Cables & Tie-Down Blocks    7" Articulating Arms    Rubber-Coated Magnets    Supports Optional Bracing Kit

• 145mm vibration isolator contains 1/4" and 3/8" threaded and non-threaded holes
• Vibration isolator center hole is 10mm non-threaded on one side and 3/8" threaded on the other side
• 88mm rubber-coated magnets support up to 60 lb force per magnet, and each contains one 3/8"-16 thread and two 5mm threads
• 7" articulating arms
• Industrial-grade hard case with high-density foam insert

Related Questions and Answers

Q: 1. What is the weight capacity? What grade of alloy is used?

A: The weight of this DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator, is :0.5~8kg And the Material would be :alloy aluminum+stainless steel wire spring.

Q: 2. Is the tension adjustable?

A: The tension on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal can be adjusted by removing or adding the cables.

Q: 3. Can the 3/8 screw on top be removed?

A: The 3/8 top screw on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is not removable.

Q: 4. The load capacity is 132 lbs. and the Sony camera mounted to it weighs under 2 lbs. Is that correct?

A: The DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is made of Aluminum alloy. The weight is 1.8lbs, and the weight support is 132lbs.

Q: 5. I'm looking for a way to reduce vibration while filming on a boat and am wondering if this could be mounted on a monopod?

A: The DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator has many mounting points that could be used with a MonoPod. The HULK-ISO will only help with motor vibrations and not the rocking and pitching motion of watercraft.

Q: 6. Can it be installed with a Canon 90D camera?

A: The DigitalFoto Solution Limited HULK-ISOPRO Shock Vibration Isolator is meant to mount the DJI RS2/3 but can easily mount another camera, like the Canon 90d.

Q: 7. Can it be installed on a suction cup with cheese plate such as Matthews 10" Vacuum Cup with Cheese Plate?

A: The Digital Photo solutions Vibration mount would work best with Suction cup mounting solutions that support the isolator like BH #CASK01. However it is a universal solution and could work with other suction cup mounting solutions like Matthews.

Q: 8. How do you separate the magnets once they're together?

A: The Film Devices Camera Magnetic Car Mount Kit magnets can be moved apart with your hands.

Q: 9. Does this come with a carry case?

A: I'm sorry, but this Film Devices Microphone Travel Boompole Kit (Carbon Fiber) does not include a carry case. For the pole, I would recommend using this case, which is available via special order: https://bhpho.to/3JL5kFd

Q: 10. Does it have to be used with a particular mount?

A: The DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator is a universal solution. However if you are attaching a DJI Gimbal like the RS3 Pro or RS2 to the shock mount you would need a gimbal base adapter BH #DIPDRS2 https://bhpho.to/3BtjbLM