Carbon Fiber Classical Guitar Nylon Strings

Fotopro E7 Carbon Fiber Tripod With Gimbal Head

Product Code: ga85384
Availability: In Stock

$2,697.00 $3,398.22

Qty

5 reviews Write a review

Description
Reviews (5)

The E7 Carbon Fiber Tripod with Gimbal Head from Fotopro is a high-performance carbon fiber tripod that operates smoothly in all kinds of environments. The included E-7H Gimbal head offers 360-degree vertical and horizontal movement with no blind angles. The E-H7 gimbal head maintains the weight of a camera and a telephoto lens up to 22 lb while allowing swing, tilt, and 360° panning to follow fast-moving subjects. Attached to a tripod, it only adds a mere 1.5 lb because of its carbon fiber construction, and the head can be leveled at its base without having to adjust the tripods legs on uneven terrain. This head and leg set make a kit well suited to wildlife, birding, sports, and any outdoor adventure photography.

Load Capacity: 22 lb Maximum Height: 63.4" Minimum Height: 6.1" Folded Length: 28.1" Leg Sections: 4 Weight: 6.26 lb Carbon Fiber Tubes Twist Locks E-7H Gimbal Head Arca-Type Compatible QR Plate Included

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male
Camera Plate	Quick Release: Arca-Type
Head Type	Gimbal Head
Drag Control	No
Primary Material	Carbon Fiber
Load Capacity	22 lb / 10 kg
Maximum Working Height	63.4" / 161 cm
Minimum Working Height	6.1" / 15.5 cm
Closed Length	28.1" / 71.4 cm
Weight	6.26 lb / 2.84 kg
Camera Attachment
Camera Mounting Screw	1x 1/4"-20 Male
Camera Plate	Quick Release: Arca-Type
Head
Head Type	Gimbal Head
Pan & Tilt
Drag Control	No
Independent Pan Lock	Yes
Vertical Tilt	90°
Legs
Primary Material	Carbon Fiber
Leg Lock	Twist Lock
Leg Sections	4
Independent Leg Spread	Yes
Leg Positions	3 Positions
Foot Features	Spiked, Removable
General
Load Capacity	22 lb / 10 kg
Maximum Working Height	63.4" / 161 cm
Center Column	Yes: Ballast Hook
Minimum Working Height	6.1" / 15.5 cm
Closed Length	28.1" / 71.4 cm
Accessory Mounting	2x 1/4"-20 Female Thread
Bubble Level	Yes
Weight	6.26 lb / 2.84 kg
Packaging Info
Package Weight	9.95 lb
Box Dimensions (LxWxH)	28.5 x 9.5 x 5"

The center of gravity can be adjusted from left to right
10-layer 1K carbon fiber for light weight durability
Three leg positions
Low shooting angle available
Twist lock joints require only 1/4 rotation to lock and unlock
Removable rubber feet, with spiked feet
Arca-type long plate included

Related Questions and Answers

Q: 1. Is the 63'4" height measured to the apex of the tripod, or to the top of the gimbal head?

A: The maximum height of the Fotopro E7 is taking the gimbal head into account.

Q: 2. Hi! Does this tripod-gimbal combo also have the L portion of the gimbal, or is it only side mounting?

A: Fotopro E6L Eagle Series Carbon Fiber Travel Tripod with Gimbal Head includes L portion in the box.

Q: 3. Are the colorful accents at the twistlocks more red, or more orange?

A: The accents are closer to red.

Q: 4. What is the capacity? Specs show 22 lbs and a weight of 9.24 lbs. The E6 specs show half the weight and a capacity of 33lbs.

A: The tripod weighs 5.3lbs and has a load capacity of 22lbs.

Q: 5. Is there a taller version of this? I'm 6 ft. tall and max height of this model is only 5'3".

A: No, keep in mind the legs go up to 64" but the gimbal head adds another 7-8" and then the camera add another 5" or so.

Q: 6. What tripod leg protectors fit this tripod?

A: The top leg section of this tripod has a diameter of 28mm/1.10in. The LensCoat LegCoat Wraps 107 are a good option. These are the correct diameter and cover 7 inches of length of the leg. These come in different colors. Here is a link to a set of these in Black. https://bhpho.to/3cBQS00. On this page you can select other colors and other lengths should you wish.

Q: 7. If the fotopro videohead has max payload of 3 kg, how can it hold 5 kg when paired with the X-Aircross 3?

A: The max load for the Fotopro X-Aircross 3 Video Carbon Fiber Tripod (Slate Gray) is 10kg.

Q: 8. Is this the Eagle series tripod & gimbal?

A: Yes, the Fotopro E7 Carbon Fiber Tripod with Gimbal Head is the same as the Eagle E7 tripod.

Q: 9. Where is this made?

A: The following unit is made in China.

Q: 10. Does the gimbal head, collapsable? or stay in that L shape 90 degree way, kind of hard to bag for travel?

A: In the Fotopro E7 Carbon Fiber Tripod with Gimbal Head you can remove the cradle that holds the camera from the gimbal. Will make it easier to pack it in a bag.

Ralph	29/09/2024
This is not my first purchase from them but this is my first carbon tripod. Very nice, clean, and mechanically sound 5

Joseph	19/07/2024
Came with some accessories. but no instructions like long handle and no direction on where it attaches I am sure I will figure it out but at this price I expect to see some paperwork; no paperwork at all in the boxes. 5

Wes	18/06/2024
Ordered this to replace list travel tripod I purchased 12 years ago from B&H. Not only is this lighter, stronger and two inches shorter when folded than my old one, it also sets up much easier with one twist of bottom leg. I used this on recent trip and it was great. Much quicker and easier to deploy than models where each leg segment needs to be locked. The real bonus is the price which is half what I paid in 2012!! 5

Lisa	16/05/2024
I love this tripod because the tripod itself is very sturdy, yet lightweight. I am 5'6 tall and it suits me well without extending it completely to its limit. I would say if you're 5'9 it would still work really well for you. The head offers a ballhead, gimbal head, and video panhead together in one. What I love most is that you can loosen the tension on the head and turn it from a smooth pan, to providing you gentle click-stops that clue you in to how much panning is needed before you take another shot. This is AWESOME for night photography especially! No guesswork on your overlapping shots anymore---you can get it just right! I also love how lightweight this tripod is. At just over 5lbs and collapsing to about 24, it really suits me well. It's durable, no center column so I can get the legs to open up to about 90 and the feet don't fall off like on another tripod brand I've owned. I LOVE LOVE LOVE the instant level feature on the tripod that works with the head. It makes it SO much easier than adjusting the height of the legs when you need to get perfectly level. The video panhead is awesome as well. Just the right amount of soft tension so that you can do panning without the stuttering and shake that a traditional ballhead or gimbal would give you. I never heed to switch tripod heads again. This has solved my issues of past tripods and heads. Lastly, you can set your head in such a way that your lens can shoot on its nodal point for multi-stitched panos---reducing the distortion that you get of traditional ball heads or gimbal heads that do not have this feature. Great stuff. I've owned this tripod for several years and can't imagine having anything else. 5

Taylor	01/05/2024
This tripod design is so well thought out. It weighs nothing, it’s sturdy and it folds down so small. The split center column is great for low shots. The ball head is really well thought out. There’s a panoramic adjustment on the clamp on top and if I adjust the ball to portrait mode and mount my 40-150 f2.8 or 100-400 lens collars on in this position I can shoot like I do with a gimbal. Saves a lot of weight and space traveling with its versatility. Love the quick deployment 5