Convert up to 4 HDMI video channels to RF video, which you can send to hundreds of TV's, with the Petit HDMI RF Modulator Chassis System from Thor Fiber. This setup is perfect for bars, restaurants, or anyone whom would like to set up four different HDMI media feeds to their location, allowing for much more diversity in content displayed throughout your venue. Control your setup via a PC by connecting to the modulator and use the easy-to-use yet powerful GUI for controlling your system via NMS over RJ45.

The Thor Modulator is an all-in-one device, integrating HD MPEG2 encoding with AC3 Dolby Audio with an internal digital modulator. Convert 720p, 1080i, and 1080p HDMI audio/video signals into DVB-C / DVB-T / ATSC / ISDB-T RF output for display on TV's with an RF input. Each modulator has its own loop out, RF In/Out combiner, Network Management System (NMS) port and programmable front LCD panel.

Converts HDMI to RF Signal    For Restaurants and Venues    Supports up to 1080p60 Resolution    QAM, ATSC, DVB-T, or ISDB-T CATV Formats    MPEG2 Video Encoding, AC3 Audio Encoding

• HDMI input, HDCP compliant (works with any HDMI device)
• 10/100 Ethernet NMS port for control, setup, and monitoring
• RF output could be set to any CATV format as QAM, ATSC, DVB-T, or ISDB-T
• RF output power is +24 dBmv, enough for distributing HDTV video to multiple TVs over the existing coax cable network
• RF power can be controlled over the network via NMS GUI (Proprietary)
• Although you can edit through the front panel, you can also use the Graphical User Interface via a web browser and the NMS port to set more precise settings
• You can also use multiple Petits to broadcast in both ATSC and Cable QAM modulation for your various media needs
• MPEG2 video encoding, AC3 Audio encoding
• Video bit-rate: 19.3 Mb/s
• Supports any CATV RF agile channels form 57-1000 MHz, channels 2-145
• Supports output resolutions up to 1080p
• Easy to set up via NMS
• Small size and lightweight
• Includes wall-mount-type rack ears

Related Questions and Answers

Q: 1. IS THERE A MANUAL FOR THE -ETC CS20 ?

A: There is. It can be found on ETCs website.

Q: 2. how is it mounted?

A: Hi, this PTZ camera can be mounted to the wall or ceiling using the included wall/ceiling mounting hardware.

Q: 3. What is the difference between this model and the ZEZVPRO810?

A: The ZV Pro 810i has IP streaming. The other model does not offer the IP streaming feature.

Q: 4. Are the Focusing Stageand Lens Stage included? the picture shows them but is not written in in the box list.

A: Yes, the negative and lens stages are included while the head and baseboard are separate.

Q: 5. What moving lights do you recommend to go with this?

A: The ETC CS20 20-Fader ColorSource will adapt to any 5‑pin DMX connection. We usually suggest the following unit that makes a great pair American DJ Focus Flex L7 RGBW LED Moving Head with Pixel Effects BH #AMFOCUSFLXL7 • MFR #FOCUS FLEX L7 https://bhpho.to/3Rv2rd6

Q: 6. would this device be able to display unencrypted catv digital signals? we use them at our business from a blonder tonue encoder.

A: The Thor QAM CATV RF and ATSC RF to HDMI Decoder Set-Top Box is designed to decode ATSC and QAM Signals.

Q: 7. Does this have accessory jack for handheld microphone?

A: Motorola does not offer a handheld microphone for this radio.

Q: 8. Will the traditional Motorola stye surveillance earpiece and mic work with radio?

A: Yes, the Motorola DTR700 Digital 2-Way Radio will work with traditional Motorola earpieces such as the Motorola HKLN4601 Single Wire Surveillance Earpiece with In-Line Mic and PTT (MOHKLN4601).

Q: 9. Can it be utilized outside in inclement weather conditions? If so, Please provide the MTTFF and MTBF?

A: No, the Thor Satellite L-Band RF over Fiber Transmitter and Receiver Kit is not waterproof. This unit would need to be mounted in NEME4 waterproof enclosure. Also, the failure rate is very low, it is about 1 % in 2 years of operation.

Q: 10. Additionally, is it possible to run audio out of the FX6 to the Comtek without using the headphone output? Ideally the shooter would use that to monitor audio levels on the spot, while the producer listens in from afar. Could I run audio out from SDI to the Comtek?

A: The Comtek PR 216 is a receiver. You need to go into a compatible Comtek transmitter to be able to do that, like the M-216 and that does not take SDI input.