The white CV605 Compact 3G-SDI/IP PTZ Camera with 5x Optical Zoom from Marshall Electronics is designed for professional conferencing applications in meeting rooms, classrooms, houses of worship, live streaming, and event production. It captures video at up to 1080p60 resolution and can output to either its 3G-SDI port or IP streaming via its LAN port. Its lens features a wide 85° angle of view that also supports a 5x optical zoom and a 10x digital zoom to capture the full area of a room.

You can control and manage the CV605 using its RS-232 RJ45 input using the VISCA, Pelco-P, or Pelco-D serial protocols. The camera is powered using the included power adapter, or it can be powered using PoE (Power-over-Ethernet) on a supported network. It's compatible with separately available camera controllers such as the Marshall VS-PTC-IP.

Capture and Stream up to 1080p60 Video    5x Optical Zoom, 10x Digital Zoom    85° Angle of View    3G/HD-SDI and IP Video Output    RS-232/VISCA Serial Control    Camera Comes in White Color

1/2.8" high-quality CMOS sensor that captures video resolutions up to 1920x1080p60

The camera features a 5x zoom lens with a wide 85° angle of view with low distortion

An accurate autofocus algorithm makes lens fast and stable auto-focus

A low-noise CMOS sensor effectively ensures high SNR of camera video, and advanced 2D/3D noise reduction technology is also used to further reduce the noise while ensuring image sharpness

Using high-accuracy step motor technology, camera movement is extremely quiet with smooth maneuvers and fast, accurate destinations (with presets)

The camera features 3G-SDI and RJ45 LAN interfaces

Supports 16, 32, 44.1, and 48 kHz sampling frequencies and AAC, MP3, and G.711A audio encoding

Support for ONVIF, RTSP, and RTMP IP streaming protocols

Supports ultra-low power consumption while in sleep mode (less than 400mW)

Support for VISCA, Pelco-D, Pelco-P protocols and supports auto-discovery

Up to 255 presets via serial and 10 presets are available on the IR remote controller

Related Questions and Answers

Q: 1. What is the distance range for the IR remote control?

A: The distance range for the IR Remote Control is not specifically listed, but it will be a matter of feet in this case. It is going to only work at close range and with an unobstructed line of site. If you need to controller it from further distances you will need a a more professional joystick. https://bhpho.to/2OsU31p

Q: 2. How much power is needed if powered over a PoE switch? Could you recommend a adequate switch. Trendnet etc?

A: I am sorry to say we do not have exact figures on how much power is required. That being said, we feel confident it will work with a product like the TRENDnet TPE-082WS 10-Port Gigabit PoE+ Managed Switch, B&H # TRTPE082WS. https://bhpho.to/2BgWjzy

Q: 3. Can the minimum pan and tilt speeds go below 1 deg/sec?

A: That would be a function of the controller it is paired with more than anything else. The compatible VS-PTC-200 that Marshall Electronics offers can be set to 3 different speeds, however there is not a setting that will go that slow. It may be possible if you set the controller to the slowest speed and manually turn the joystick gently though. This sounds like a very specific function you are looking for, feel free to email us directly at provideo@bhphoto.com so we can assist you further.

Q: 4. Can this camera output hd-sdi and h.264 via ethernet simultaneously?

A: Yes it can. All outputs are active simultaneously on the CV620-IP.

Q: 5. Can this camera be mounted on a tripod?

A: Yes, this can be mounted on a tripod.

Q: 6. What cable would I use to place the camera 25-50 feet from the controller? The PTC-200 controller only had a short cable and I do not have the ability to build one of my own.

A: B&H # TEVMDX850 is a TecNec Visca Camera Control Cable 8-Pin DIN Male to Male 50 Feet that you can use. https://bhpho.to/2Jgf7nT

Q: 7. Can this also be operated with a joystick?

A: Yes, the Marshall Electronics CV620-TBI 20x Tracking PTZ Camera (Black) can be operated by a joystick controller. The camera offers ONVIF, VISCA, VISCA Over IP, and PELCO D protocols. A controller example is the Marshall Electronics VS-PTC-IP IP PTZ Camera Controller. See the link below: https://bhpho.to/42hijVt

Q: 8. Can the ptz functions work over sdi with black magic camera controls?

A: No it is not capable of being controlled over SDI cables. This camera is only capable of receiving commands via IP (RJ45/Cat 6 cables), RS232, or RS422.

Q: 9. what th type of shutter it have? What the name/model of sensor it use?

A: This is a CMOS sensor and has a rolling shutter

Q: 10. Can anyone speak to the low-light performance of this camera's image sensor? Planning to use these models in a Synagogue install, where portions of the service will have dimmed room light. Not entirely dark.

A: Marshall lists this for use, among other things, for houses of worship. Users have reported excellent over all image quality.