The fully adjustable Headliner Avalon Dual CDJ Stand is designed to elevate a pair of Pioneer CDJ-3000, Denon DJ SC6000M, or similar-sized media players off the DJ booth surface, leaving room for turntables or additional decks on either side of your mixer.

The twin CDJ arms can be positioned at any height up to 19" above your workspace. Once set in place, they are secured with a bolt locking system to keep them from moving around during performances. The trays pivot and tilt independently and feature lips at the top and bottom to hold your gear in place. Each tray is 12" wide with a variable depth of 14 to 18" making them compatible with smaller media players to the full-sized CDJ line.

For CDJ-Sized Players or Controllers    Trays Tilt and Pivot Independently    Adjustable Lips at Top and Bottom    12" Wide x 14 to 18" Depth    Maximum Tray Height: 19"    Base Plate: 16.5 x 19"

• Dual CDJ stand with independently adjustable twin arms
• Trays fit most single-deck CD and media players including CDJ-3000, CDJ-2000NXS2, CDJ-2000 Nexus, CDJ-900NXS, XDJ-1000MK2, XDJ-700, DJS-1000, SC6000M, SC6000, SC5000M, SC5000, and NDX500
• Base plate fits most DJ mixers including DJM-2000NXS, DJM-900NXS2, DJM-900 Nexus, DJM-900SRT, DJM-850, DJM750MK2, X1850 Prime, Xone:96, Xone:43, Xone:43C, Xone:DB4, Xone:PX5, and more
• Heavy-duty powder coated steel base plate

Related Questions and Answers

Q: 1. I have two Dell S2240M 21.5 Inch Screen LED Lit Monitors that I would like to place use on a MDS19 Dual Monitor stand. The monitors are "Not VESA Compatible" per Dell. Can I mount on the Dell MDS19 stand?

A: I'm sorry. This stand only works with monitors that have a VESA mounting hole pattern up to 100 x 100mm. A generic or universal stand will not work with those monitors. Only Dell UltraSharp and P-series monitors with Quick Release can be attached without VESA mounting.

Q: 2. Can I mount two U2719D's on this? I am concerned they might be too heavy.

A: Yes. As this Dell MDS19 Dual Monitor Stand is a Dell product and so is U2719, this will work. Per the Dell MDS19 Dual Monitor Stand spec sheet: Key Features Mount up to Two 19 to 27" Monitors

Q: 3. Will this fit a Klipsch KP-201? screw hole 5"x4.7"

A: No, the Headliner HL31001 is used to mount a TV, monitor, video projector, or moving-head light fixture onto a speaker stand. The mounting plate is for vertical use, like to attach a viewing screen. It is not for use horizontally, so it should not be used for mounting speakers.

Q: 4. Does the adjustment on this stand allow one monitor tilt or swivel individually or do monitors adjust together as one?

A: The monitor adjustments are independent of each other, allowing each monitor to be individually adjusted.

Q: 5. will this fit a epson hc-1450 projector?

A: Epson makes no mention of a VESA mount on this projector.

Q: 6. What is the resolution?

A: This is a stand only. No monitors are included, so there would be no resolution.

Q: 7. Can you use a mic boom pole like this with a strobe flash with a 60" octabox?

A: No

Q: 8. Hello there any power electric for Avalon 737 Cz I am in medel east

A: This will accept 100v to 240v, 50-60Hz (selectable). You will need the proper adapter for the cable, but you will not need a power converter.

Q: 9. What is the height?

A: The manufacturer has not provided dimensions for height.

Q: 10. Lists every measurement but the maximum and minimum height adjustment. What is it please?

A: I am sorry but the specifications for minimum and maximum height adjustments on the Headliner Covina Pro Controller Stand are not provided by the manufacturer.