Store, transport, and protect your small gear in this orange 85 Micro Hard Case from Seahorse. Constructed from impact- and corrosion-resistant polycarbonate, it has a hinged lid with an O-ring seal. It is buoyant, as well as dust and waterproof to an IP67 rating. It features stainless steel hinges, a keyed plastic safety locking latch, and an automatic pressure release valve that equalizes the internal pressure with ambient air pressure to prevent crushing and make it easy to open after air travel in unpressurized cargo holds. This version of the 85 case has internal dimensions of 13.9 x 9.9 x 1.76" and comes with a removable shock-absorbing liner to protect gear like tablets and other thin electronics or diagnostic tools and a mesh lid "web" for stowing small stuff like cords, memory cards, and batteries.

Corrosion, Dust & Waterproof    Impact-Resistant Polycarbonate    13.9 x 9.9 x 1.8" Interior Space    Removable Padded Liner & Mesh Lid "Web"    Automatic Pressure Release Valve    Rustproof Stainless Steel Hinges    Two Keyed Plastic Safety Locking Latches

Related Questions and Answers

Q: 1. Can you fit a 16" MacBook Pro in that top pocket in the lid?

A: The top pocket on the lid of the Nanuk 918 Waterproof Carry-On Hard Case with Lid Organizer (Graphite) BH #NA9186007 is small for a 16" MacBook Pro.

Q: 2. Do the padded dividers come set up?

A: Yes, the Nanuk 933 Case with Dividers and Lid Organizer (Silver) comes with the dividers and lid organizer in the case.

Q: 3. Would small cinema lenses with 95mm front outer diameter fit ?

A: Each hole is roughly 4 inches in diameter (100mm) and they taper down to about 3 inches (76mm). If you have some lenses that are larger than 4 inches I would recommend either the foam insert version https://bhpho.to/3eztYYT or the divider version: https://bhpho.to/36Rfyil The Divider version is more adaptable in case you change which lenses or other accessories you might be carrying.

Q: 4. Does this case fit for the Samyang VDSLR mark II (14mm, 24mm, 35mm, 50mm & 85mm)??

A: The pre-cut holes will not fit the Samyang lenses so I would recommend this case with dividers: B&H # NA9182001 MFR # 918-2001 https://bhpho.to/3aJ0h5Q

Q: 5. Will Zeiss Otus lenses fit into this case?

A: Yes, they will fit.

Q: 6. Would it fit Canon FD Lenses with a cine modded 80mm OD front ring and slip on caps?

A: Yes your lens may fit this case.

Q: 7. Would an assembled C100 mk ii (top handle attached, and Canon EF 24-70 lens mounted) fit in this case?

A: Based on the measurements it would be a very tight fit and not recommended. Another choice that would work is https://bhpho.to/39ftveq

Q: 8. Hi, would signs cine primes fit in this? 20-24-35-50-85 what is the diameter and depth of the hole?

A: The total allowable depth is 6" in / 152 mm. The top section is 4" in / 102 mm in diameter with a depth of 2" in / 51 mm. Below that there are 2 removable foam discs with a diameter of 2 7/8" in / 73 mm. One disc has a height of 1 1/2" in / 38 mm. The other disc has a height of 2 1/2" in / 64 mm.

Q: 9. What is the largest lens this can handle?

A: A Canon 24-105mm f/4L would be the largest lens it can hold.

Q: 10. Will Irix cinema lenses fit?

A: Yes, Irix Cine lenses will fit in the Nanuk 918 6-Lens Case with Foam Insert (Black).