Store, transport, and protect your small gear in this yellow 85 Micro Hard Case from Seahorse. Constructed from impact- and corrosion-resistant polycarbonate, it has a hinged lid with an O-ring seal. It is buoyant, as well as dust and waterproof to an IP67 rating. It features stainless steel hinges, a keyed plastic safety locking latch, and an automatic pressure release valve that equalizes the internal pressure with ambient air pressure to prevent crushing and make it easy to open after air travel in unpressurized cargo holds. This version of the 85 case has internal dimensions of 13.9 x 9.9 x 1.76" and comes with a removable shock-absorbing liner to protect gear like tablets and other thin electronics or diagnostic tools and a mesh lid "web" for stowing small stuff like cords, memory cards, and batteries.

Corrosion, Dust & Waterproof    Impact-Resistant Polycarbonate    13.9 x 9.9 x 1.8" Interior Space    Removable Padded Liner & Mesh Lid "Web"    Automatic Pressure Release Valve    Rustproof Stainless Steel Hinges    Two Keyed Plastic Safety Locking Latches

Related Questions and Answers

Q: 1. The picture shows black nylon coated dividers, but the Nanuk website shows grey dividers to which you can attach velcro straps. Which type comes with this case?

A: They come with black nylon dividers.

Q: 2. Would the Canon EF 70-200 f/2.8 fit there? Its length is 8.5 inches, but I read that 24-105 f/4 would be the largest, which is much smaller ...

A: The Canon EF 70-200mm f/2.8L IS USM lens would be just a bit too long to fit this case.

Q: 3. Would an assembled C100 mk ii (top handle attached, and Canon EF 24-70 lens mounted) fit in this case?

A: Based on the measurements it would be a very tight fit and not recommended. Another choice that would work is https://bhpho.to/39ftveq

Q: 4. Would this case fit Schneider Xenon FF lenses?

A: Yes, the Nanuk 918 6-Lens Case with Foam Insert (Black) can hold Schneider Xenon FF lenses.

Q: 5. Hi Does this case fit for the Samyang VDSLR Mark II (14mm 24mm 35mm 50mm & 80mm)??

A: While the manufacturer does not list the diameter of the lens cavity, it can easily hold a lens that is 3" or smaller in diameter. So those lenses lenses all should fit.

Q: 6. Can this fir the Sirui Night Walker cine lenses?

A: Yes, the Nanuk 918 Hard Case with Foam Insert for Six Lenses (Black, 20.L) will fit the Sirui Night Walker Cine Lens series. The lens dimensions are 79mm wide, and 85.4mm tall. The lenses inserts on the pre cut foam that comes with the case are 103mm wide by 113mm long.

Q: 7. Hi! Does this case fit for the Samyang VDSLR Mark II (14mm, 24mm, 35mm, 50mm &85mm)????

A: Yes those lenses can fit in this case.

Q: 8. What is the inside measurements with the with TrekPak Inserts installed? I want to fit a 5d mark IV (no battery grip) and 3 lenses biggest would be 70-200 f2.8 II IS.

A: The interior dimensions of this case are 17.8 x 10.2 x 6.25 . The TrekPak Inserts are adjustable to fit your needs depending on the gear you have.

Q: 9. Will this fit Xeen cine lenses?

A: Unfortunately the Xeen lenses similar to the following: https://www.bhphotovideo.com/c/product/1171028-REG/rokinon_xn50_c_xeen_50mm_t1_5_lens.html are going to be slightly too big for these custom cuts. Those Xeen lenses are right around 4.6" in diameter and the largest lens the custom cut can take is a 4". If you need a case for the Xeen lenses, I would recommend the following case: https://www.bhphotovideo.com/c/product/1352762-REG/rokinon_xncase_co_xeen_6_lens_carry_on_case.html/overview

Q: 10. Can anyone provide the dimensions for the lens cutouts? That would help people determine which of their lenses will fit.

A: Nanuk doesn't mention the dimensions for the lens cutouts but the case accommodates most lenses sizes: 8-15mm, 24-70mm, 24-105mm, 17-40mm, 17-55mm and 100mm.