Power your Blackmagic URSA, URSA Mini, or URSA Mini Pro camera or other gear using a Gold mount battery with this Gold Mount Battery Bracket with Blackmagic URSA Series Molex Output from Anton/Bauer. The bracket features a Blackmagic URSA Series Molex connector to power cameras such as the Blackmagic URSA, URSA Mini, or URSA Mini Pro, and it accepts one separately available Gold mount battery.

The plate can also output 12 to 16 VDC power for your camera or accessories using its three P-Tap outputs. It features a digital fuse that will reset the P-Tap outputs if the current is exceeded, so your devices will be protected.

Pro Gold Mount Battery Bracket    Blackmagic URSA Series Molex Output    3 x P-Tap Outputs    Digital Fuse for Current Protection

Blackmagic URSA, URSA Mini, or URSA Mini Pro camera
Anton/Bauer Gold mount battery such as Titon or Titon Micro

Related Questions and Answers

Q: 1. What screws should I use to mount the plate?

A: The Ursa mini has a blank plate installed from the factory. When you remove the blank plate, you can re-use the screws to mount the AB. I didn't need to purchase anything extra to install it, it was very easy.

Q: 2. Is this plate compatible with the Core SWX NANO Micro 14.8V 147Wh Lithium-Ion Battery, Gold-Mount?

A: We have reason to believe based on current information that Anton Bauer Titon Micro Dual Gold Mount to Single Gold Mount Battery Bracket is compatible with the Core SWX NANO Micro 147Wh Lithium-Ion Battery (Gold Mount).

Q: 3. where is the USB outlet located?

A: The USB-C port of the Anton/Bauer Titon Micro Gold Mount Battery Bracket with P-Tap and USB Output is located to the lower left side of the adapter based on the image shown on our site.

Q: 4. Can you use this on a standard full size titan gold mount charger to charge Titon Micro batteries?

A: Yes, Anton Bauer Gold Mount Micro batteries can charge on traditional full sized chargers, and the will work with a Traditional sized Gold mount plate. The Anton/Bauer Titon Micro Dual Gold Mount to Single Gold Mount Battery Bracket though is designed to work with the Smaller Micro sided batteries though so that two batteries will fit on the mount.

Q: 5. Is this compatible with LiveU 800?

A: No. The Pro Gold Mount Battery Bracket is only compatible with Sony (FS7, FS5) & Panasonic (EVA1).

Q: 6. where is the other p-tap located?

A: The Anton/Bauer Micro Gold Mount Battery Bracket with Dual P-Tap Outputs (B&H# ANMGMBDPT) has two P-tap ports. One is pictured in the photo and the other one is directly opposite it on the other side of the bracket.

Q: 7. Does this battery plate also work on the Ursa Mini Pro 12K?

A: Yes, the Anton Bauer Pro Gold Mount Battery Bracket with Blackmagic URSA Series Molex Output is compatible with the Blackmagic Design URSA Mini Pro 12K (PL).

Q: 8. Will this work for the Canon R5C or R5II while providing enough voltage to run all features/ functions?

A: No, the Canon EOS R5C Mirrorless Cinema Camera and Canon EOS R5 Mark II Mirrorless Camera require USB-C PD power to gain all recording capabilities.

Q: 9. Is this battery bracket compatible with any multipurpose cheese plate? Specifically, BH #IDACPMICRO ?

A: The Anton/Bauer Micro Gold Mount Battery Bracket with Dual P-Tap Outputs requires Micro mounting accessories (linked below) from Anton Bauer and is not compatible with a multipurpose cheese plate. https://www.antonbauer.com/en/product-category/Micro-Accessories/Micro-Accessories/

Q: 10. Is it possible to flip the AB micro plates 90 degrees? My plate is mounted where this plate would be upside down.

A: No, it is not possible to flip the AB micro plates 90 degrees.