Use the Gold Mount Battery Bracket from Anton/Bauer to power your RED DSMC1 or DSMC2 camera with a high-capacity Gold mount battery. The plate has a 4-pin LEMO-type connector on an 8" cable, and it features two D-Tap outputs. It mounts onto the camera using its captive mounting screws. The cable is wired to provide battery information on the RED camera display.

2 x D-Tap Accessory Outputs    4-Pin LEMO-Type Connector, 8" Cable    Displays Battery Info on Camera    Captive Mounting Screws

RED DSMC1 and DSMC2 cameras

Related Questions and Answers

Q: 1. Is this battery bracket compatible with any multipurpose cheese plate? Specifically, BH #IDACPMICRO ?

A: The Anton/Bauer Micro Gold Mount Battery Bracket with Dual P-Tap Outputs requires Micro mounting accessories (linked below) from Anton Bauer and is not compatible with a multipurpose cheese plate. https://www.antonbauer.com/en/product-category/Micro-Accessories/Micro-Accessories/

Q: 2. Do micro V mount plates work with normal V mount batteries?

A: Yes Micro V mount plates work with normal V mount batteries (and vis versa).

Q: 3. Is this RED approved like the Core SWX battery plate?

A: it isn't currently listed on the RED approved accessories list

Q: 4. will this work wih a sony f55?

A: The Anton Bauer Gold Mount Battery Bracket Adapter is designed to be fitted on the RED DSMC2 camera. It won't fit properly on the Sony PMW-F55.

Q: 5. Can I couple this with MFR #8375-0239 and use 2 Titon Micros with hot swap capability? If so, will I be able to use every P-tap / USB-A output on that setup?

A: The Anton Bauer Micro Battery Bracket for RED KOMODO (Micro V-Mount) is for one battery. It cannot mount the Anton Bauer Titon Micro Dual V-Mount to Single V-Mount Battery Bracket. You need a V mount on the camcorder to use the Anton Bauer Titon Micro Dual V-Mount to Single.

Q: 6. Is there a cheese plate that I can mount this on?

A: A good choice for this Anton Bauer Micro Gold Mount Battery Bracket would be the following. Anton Bauer Micro Cheese Plate with 15mm Rod Clamps BH #ANMP15RC https://bhpho.to/3T2gCqM

Q: 7. Do you have to purchase an additional gold mount plate in order to use the dual bracket, if so which are compatible?

A: The dual battery bracket is included.

Q: 8. where is the USB outlet located?

A: The USB-C port of the Anton/Bauer Titon Micro Gold Mount Battery Bracket with P-Tap and USB Output is located to the lower left side of the adapter based on the image shown on our site.

Q: 9. Will this enable smart batteries to talk with the Komodo body?

A: Yes it will.

Q: 10. Is the back of this plate flat? Have holes? Also, DSCM1's LEMO input is 6 pin. Is there data or power loss w/ 4 pin?

A: The Anton/Bauer V-Mount Battery Bracket for RED DSMC1 and DSMC2 has a flat back, and the mounting holes do go through to the back of the plate. The cable is designed to plug into the 1B power port on DSMC1 cameras.