Power your Sony VENICE camera and accessories with the D-Box with V-Mount Battery Bracket from Wooden Camera. The D-Box is a power distribution box made from durable materials that features a V-mount battery plate for one 14.4V battery, and it mounts seamlessly onto the back of your Sony VENICE camera or the back of your AXS-R7 recorder, with a V-mount plate on the opposite side to provide a variety of power options to your rig.

A power strip connects to the D-Box using an included 3- to 5-pin Fischer cable, and it mounts onto the top right side of the camera using a tape-hook thread. The strip features two 2-pin 12V LEMO-type outputs, two 24V 3-pin Fischer outputs, two 12V D-Tap outputs, and one 5V USB output. There is also a matching 4-pin 12.9 to 18V XLR input on the D-Box that matches the one on the camera, so you can use the camera's AC power supply to provide a hot-swap/failover system. Power will default to the AC adapter when plugged in, so you can save your battery level until you really need it. The Fischer outputs can also be used to pass run/stop trigger information from any ARRI run/stop trigger model to the camera.

All outputs are active simultaneously, and they can be regulated using a fuse switch on the side to swap between 3.8, 5.8, or 9A to restrict power output to protect your equipment. There is a reset button if too much load current is provided to your accessories, so you can quickly reset and re-adjust your settings. Integrated LEDs indicate DC IN and BATT status, as well as battery voltage information.

Power Distribution Box for Sony VENICE    V-Mount Battery Mount and Plate    For 14.4V Block Batteries, Hot Swap    Power Strip with LEMO/Fischer/USB/D-Tap    4-Pin XLR DC Input, Regulated Outputs    Manual Fuse Selection to Regulate Power    Fischer Ports Pass ARRI Run/Stop Trigger    Mounts Directly on Camera or AXS-R7

Sony VENICE camera

Also compatible with but not limited to:
Anton/Bauer Dionic XT 90 Battery
Anton/Bauer Dionic XT 150 Battery

Related Questions and Answers

Q: 1. does this allow battery hot swap WITHOUT the internal battery?

A: As long as a battery with sufficient capacity is always mounted on the Anton/Bauer Dual Micro Bracket for Sony PXW-FX9 (Micro V-Mount), batteries can be hot swapped for continuous power.

Q: 2. Do micro V mount plates work with normal V mount batteries?

A: Yes Micro V mount plates work with normal V mount batteries (and vis versa).

Q: 3. Do you have to purchase an additional gold mount plate in order to use the dual bracket, if so which are compatible?

A: The dual battery bracket is included.

Q: 4. Will this enable smart batteries to talk with the Komodo body?

A: Yes it will.

Q: 5. Will this work with the red komodo?

A: No, please review the following system available for the Komodo that will work. https://bhpho.to/3LcZJHH

Q: 6. Is the back of this plate flat? Have holes? Also, DSCM1's LEMO input is 6 pin. Is there data or power loss w/ 4 pin?

A: The Anton/Bauer V-Mount Battery Bracket for RED DSMC1 and DSMC2 has a flat back, and the mounting holes do go through to the back of the plate. The cable is designed to plug into the 1B power port on DSMC1 cameras.

Q: 7. Is it possible to mount two 140 Wh Titon Micros to this, put that on the Anton Bauer Micro Battery Bracket for RED KOMODO, and then attach it onto the RED KOMODO's dual canon slot? If so, will I be able to hot swap + use all the p-tap / usb-a ports, and will any of the KOMODO's inputs get physically blocked?

A: Yes, the Anton Bauer Titon Micro Dual V-Mount to Single V-Mount Battery Bracket will be able to power the Komodo with that configuration. It will be hot swappable, but it will most likely obstruct the ports on the camera.

Q: 8. will this work wih a sony f55?

A: The Anton Bauer Gold Mount Battery Bracket Adapter is designed to be fitted on the RED DSMC2 camera. It won't fit properly on the Sony PMW-F55.

Q: 9. Is this RED approved like the Core SWX battery plate?

A: it isn't currently listed on the RED approved accessories list

Q: 10. Does this pass through battery data to the Komodo?

A: The Anton Bauer Battery Bracket for RED Komodo does not provide battery data to the camera.