Use this P-Tap to Sony 19.5V Regulated DC Barrel Connector from Anton/Bauer to convert the voltage from a P-Tap battery to the 19.5V required to power your Sony PXW-FX9 camera. This 20" cable enables you to power your camera using a longer-lasting professional V-mount or Gold mount battery with a P-Tap output port.

Powers Sony PXW-FX9 Camera    19.5V Regulated Power Converter    P-Tap to DC Barrel Connector    20" Length

Related Questions and Answers

Q: 1. Was wondering if this cable is also compatible with the Sony PXW-Z280 camera?

A: Yes, The Anton/Bauer P-Tap to Sony 12V Barrel Cable (20") would also support the Sony PXWZ280 camera as well.

Q: 2. Hi, can this be used to power up Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor?

A: No, The Anton Bauer P-Tap to Sony 12V Barrel Cable (20") will not work with the Video Assist 12G. Please use a dummy battery solution like the following. https://bhpho.to/3Hfs5vG

Q: 3. Will this cable will also work with the Sony Z200? Can't find info if the AC input for the Z200 will fit the pin for this cable.

A: Sony doesn't list the sizing for the DC barrel of the Sony PXW-Z200 4K 1" CMOS Sensor XDCAM Camcorder. To power via D-Tap, we would recommend a dummy battery such as the Bescor BPU30 Dummy Battery/Coupler with Unregulated D-Tap Adapter, BH #BEBPU30DTAP.

Q: 4. Can this be used on a Fs7?

A: No, this is a 19.5V output.

Q: 5. Could this be used to power an LG 4k monitor with a 19v DC barrel power input, like the LG 27UL650-W? If not, any idea if there is an adapter that could?

A: The SmallRig 19.5V Regulated D-Tap Power Cable for Sony PXW-FX9 (B&H# SM2932) is regulated to deliver the correct voltage (19.5VDC) and to support the appropriate amperage draw for the FX9. It is likely the case that the same barrel plug (and voltage and supported amperage) will also work for many other applications. Unfortunately, neither manufacturer supplies any plug/pin/hole size specifications nor amperage draw specifications. Since using an off-label item inappropriately for powering your monitor could result in damage (and could also void the warranty), we are unable to recommend it. However, we do have a return policy on this cable in case you should find that it does not suit your needs: https://bhpho.to/3pywinI

Q: 6. Is the cable 20" when extended or relaxed?

A: The Anton/Bauer P-Tap to NP-FZ100 Regulated 7.4V Dummy Battery for Sony a9/a7R III is 20" extended.

Q: 7. Does it work with the FX6 also?

A: No it does Not

Q: 8. Is this compatible with LiveU 800?

A: No. The Pro Gold Mount Battery Bracket is only compatible with Sony (FS7, FS5) & Panasonic (EVA1).

Q: 9. This cable is also advertised for a Panasonic EVA1 which has a 12V DC EIAJ Type 4. I just got the panasonic BGH1 which also has a 12V EIAJ Type 4 DC input. That would make it compatible with this cable as well right?

A: Yes, you will be able to use this cable to power the Panasonic BGH1.

Q: 10. we have tried two of these now for the R5c and neither of them have worked, has anyone else had any issues with these? (One difference we've noticed vs the product photo is that the ones we've received have smaller gauge wires). We suspect that Anton has made a manufacturing change which is not compatible with the R5c and canon's DR-EC6...

A: The Anton/Bauer P-Tap to Canon 9V Barrel Cable (20") (B&H# ANPC9RBSC) unfortunately is not compatible with the Canon DR-E6C DC Coupler for EOS R5 C (B&H# CADRE6C) to power the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C). Specifically, the power provided by the DC conversion (i.e., buck) circuit in this cable is not sufficient to supply any current model dummy battery to power the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C) and enable its full capabilities in all video modes. We have received official confirmation from the manufacturer (Anton Bauer/Videndum) of this fact.