Make handling your DJI RS 2 or RSC 2 handheld gimbal easier with this Sling Handgrip from SmallRig. This ergonomic silicone handgrip mounts onto the DJI R Briefcase handle, gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The grip mounts onto the gimbal using a 1/4"-20 anti-twist screw and can support a load up to 13.2 lb.

The aluminum sling grip features 1/4"-20 and 3/8"-16 mounting threads, an ARRI-style accessory thread, and an integrated shoe mount for an optional monitor, shoulder strap, or other accessory. A thumbscrew is included to replace the DJI R Briefcase handle screw to adjust the handle angle without a screwdriver.

Mounts onto DJI R Briefcase Handle    Silicone Grip Reduces Arm Fatigue    1/4"-20 & 3/8"-16 ARRI-Style Threads    1 x Shoe Mount, Mounts via 1/4"-20 Screw    13.2 lb Load Capacity    Allen Wrench Stores in Handle    Aluminum & Stainless Steel Construction

DJI RS 2 and RSC 2 handheld stabilizers

Also compatible with but not limited to:

SmallRig Magic Arm 2070

SmallRig Monitor Mount 2903

SmallRig Monitor Mount 2905

SmallRig Shoulder Strap KPAC2466

Related Questions and Answers

Q: 1. Will newly announced Nikon z9 along with Nikkor 14-24 s 2.8 balance on the RSC 2. The total payload is around 4.4 lbs around 2lbs under the rated payload for this gimbal ?

A: The DJI RSC 2 Gimbal Stabilizer Pro can handle the weight and balance a camera with a grip. However, top off the camera will hit the back motor on low angle shots.

Q: 2. Will it work with a Leica SL2?

A: Yep, according to DJI the DJI RSC 2 Gimbal Stabilizer is compatible with Leica's SL2 camera, although some control features are not fully supported, such as ISO, Shutter, Aperture, and RavenEye. See: https://www.dji.com/support/compatibility/rsc-2/sl2

Q: 3. Is the RSC2 compatible with the Nikon Z6II and the Nikkor Z 24-120 f/4 lens?

A: Yes, The DJI RS2 is compatible with the Nikon Z6II. The RS2 gimbal has been tested with the 24-70 f2.8. The 24-120 should work. The DJI RS2 is designed to support up to 6.6lb payloads. We also recommend the DLI RS3 Pro for long lenses because of the new SuperSmooth mode, the RS 3 Pro increases motor torque to further enhance stabilization, delivering stable footage even in fast-moving scenarios or with 100mm-equivalent focal lenses. RS2 Compatibility link https://bit.ly/3uOudHa RS3 Pro https://bhpho.to/3uREQZS

Q: 4. Can the grips be pointed up instead of down?

A: Yes, the mounting arms of the SmallRig Dual Handgrip for DJI RS 2/RSC 2/RS 3/RS 3 Pro Gimbal can be flipped for the handgrips to point up.

Q: 5. Does this work with the DJI Rs3?

A: Yes, the Smallrig Dual Handgrip for DJI is compatible with the DJI RS3.

Q: 6. Can I use a 7" monitor with this mount?

A: Yes. As long as the monitor offers two 1/4"-20 threaded holes on top and bottom.

Q: 7. Could I use this to mount a Rode shotgun mic?

A: Yes, you can. The top of the SmallRig Monitor Mount with NATO Clamp for DJI RS 2 & RSC 2 has a shoe mount that would work with Microphones. The bottom 1/4 20 screw would connect to a display. There is also another shoe mount on the arm itself as well as more screw hole mount points.

Q: 8. Can I mount a 7" monitor to this?

A: Yes, a 7" monitor would fit fine on the Smallrig Dual Handgrip for DJI RS 2/RSC 2 Gimbal, when using an appropriate shoe mount.

Q: 9. can this work wit ronin s or sc 1rst gen? thanks

A: No it will not work with the first generation DJI Ronin S or SC. It is only compatible with the RS2 or RSC2.

Q: 10. Is there a way to get this to work with the small rig magicfiz handgrip controller

A: SmallRig Dual Handgrip for DJI RS 2/RSC 2/RS 3/RS 3 Pro Gimbal is not compatible with the Smallrig FIZ for mounting.