Suspend your light, microphone, or camera rig over your subject using a rod system with this pair of Clamps for Wall Spreader from Proaim. The two clamps feature a stud that mounts a separately available 44mm diameter rod and mounts between two walls. Each clamp features two tightening screws that provide a pressure mount, so no drilling or permanent mounting is required. The durable aluminum clamps can hold up to 22 lb, dependent upon the durability of the rod used.

Support 44mm Diameter Rods    Mount on Walls Using Pressure Clamps    22 lb Load Capacity    Durable Aluminum Construction

Rods with a 44mm diameter

Walls or pillars with a flat surface and that can take pressure

Related Questions and Answers

Q: 1. Will these fit an Impact Turtle Base C-stand?

A: The Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726 can work with a Impact C-Stand.

Q: 2. Tension is adjustable to prevent bounce effects?

A: No, the RigWheels PTZ Camera Wall Mount Vibration Isolator/Damper with Pipe Clamps is designed to be used in a fixed/stationary position so bounce is not an issue.

Q: 3. With the tilt function, is there any way to make sure the speaker doesn't move or slide off, or is the tilt not that dramatic?

A: The Mount-It! MI-SB37 Universal Speaker Wall Mounts (Pair), BH # MOMISB37, will clamp tightly against the speaker's cabinet walls. A small screw may be driven through the case or use a bit of Velcro or double stick tape or a command strip as a back-up, fail-safe remedy.

Q: 4. Is this compatible with Sachtler Flowtech 75? Will it allow the tripod to collapse normally?

A: No the ProAim model will only work for ProAim Tripods. Please use the following Sachtler ground spreader with Sachtler Flowtech Tripod legs. BH #SAGSPREADER https://bhpho.to/3NWLnt9

Q: 5. How much weight will this shelf support?

A: Depends on how they are anchored on the wall. If you put the screws into studs my guess is 25 to 30 lbs. The speakers I have on them are about 15 lbs each.

Q: 6. How are the speakers secured to the bracket? Do they just slip over the posts? Can they be locked on somehow?

A: No just slip on post

Q: 7. Will these fit Kupo C-Stands?

A: The Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726 will work with Kupo C stands.

Q: 8. What is the consrucction of the woofer and its surround for example, polypropylene and butyl?

A: The manufacturer has not published this specification. Here is the complete specification:Features:In-Wall / In-Ceiling System2-Way Stereo Sound Speakers6-1/2'' Midbass Speaker1'' High Temperature Voice Coil1/2 Inch Polymer Tweeter200 Watts Rated Peak Power4-8 Ohm ImpedanceFrequency Response: 70Hz - 20kHzMounts Flush on Walls or CeilingsPerfect for Custom Installations & ApplicationsIncludes Cut-Out Template for Easy InstallationCut-out Dimensions: 7 3/4''W x 11 3/8''H x 2 7/8''DOverall Dimensions: 8 3/4''W x 12 1/2''H x 2 7/8''DSold as: PairWeight: 7.02 lbs.PYLE AUDIO INC.1600 63rd.StreetBrooklyn N.Y. 11204Tel: 800-444-5671 Email support@pyleaudio.com

Q: 9. What is the weight capacity on these?

A: 80 lbs

Q: 10. what are screws to attach to crossbar? on last 2 pictures they look like the tightening knobs but product pic looks different

A: The mounting hardware is included but they do not list its specs for the Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726.